HA1SV24002PRFA

HA1SV24002 50W DC/DC Power Modules FEATURES  High efficiency : 87 @110Vin full  Size:61.0mm*57.9mm*12.7mm(2.4’’ *2.28’’ *0.5’’)  Industry standard pin out and footprint  Fixed frequency operation  Input UVP/ OVP  Hiccup output over current protection (OCP)  Hiccup output over voltage protection (OVP)  Output current limited protection(OCL)  Auto recovery OTP  Positive enable (negative enable optional )  Monotonic startup into normal  3000V isolation and reinforce insulation  No minimum load required  load ISO 9001, TL 9000, ISO 14001, QS9000, OHSAS18001 certified manufacturing facility  EN61373，EN50155  EN60950-1 Delphi Series HA1SV24, half Brick Family DC/DC Power Modules: 53~154V in, 24V/2.1A out, 50W APPLICATIONS The Delphi Module HA1SV24002, half brick, 53~154V input, single  Railway /Transportation system output, isolated DC/DC converter is the latest offering from a world leader in power system and technology and manufacturing ― Delta Electronics, Inc. This product provides up to 50 watts power in an industry standard footprint and pin out. With creative design technology and optimization of component placement, these converters possess outstanding electrical and thermal performances, as well as extremely high reliability under highly stressful operating conditions. DATASHEET DS_HA1SV24002_04082016 E-mail: dcdc@deltaww.com http://www.deltaww.com/dcdc P1 TECHNICAL SPECIFICATIONS PARAMETER 1. ABSOLUTE MAXIMUM RATINGS 1.1 Input Voltage 1.2 Input surge withstand 1.3 Operating Ambient Temperature 1.4 Storage Temperature 1.5 Input/Output Isolation Voltage 2. INPUT CHARACTERISTICS 2.1 Operating Input Voltage 2.2 Input Under-Voltage Lockout 2.2.1 Turn-On Voltage Threshold 2.2.2 Turn-Off Voltage Threshold 2.3 Input Over-Voltage Lockout 2.3.1 Turn-On Voltage Threshold 2.3.2 Turn-Off Voltage Threshold 2.4 Maximum Input Current 2.5 No-Load Input Current 2.6 Off Converter Input Current 2.7 Input Reflected-Ripple Current（pk-pk） 3. OUTPUT CHARACTERISTICS 3.1 Output Voltage Set Point 3.1.1 Load regulation 3.1.2 Line regulation 3.1.3 Temperature regulation 3.2 Output Voltage Ripple and Noise 3.2.1 Peak-to-Peak 3.2.2 rms 3.3 Operating Output Current Range 3.4 Output DC Current-Limit Inception 4.DYNAMIC CHARACTERISTICS 4.1 Output Voltage Current Transient 4.1.1 Positive Step Change in Output Current 4.1.2 Negative Step Change in Output Current 4.2 Turn-On Transient 4.2.1 Start-Up Time, From On/Off Control 4.2.2 Start-Up Time, From Input 4.2.3 Rise time(Vout from 10% to 90%) 4.3 Maximum output capacitor 5. EFFICIENCY 5.1 100% Load 5.2 60% Load 6.ISOLATION CHARACTERISTICS 6.1 Input to Output 6.2 Input to base 6.3 Output to base 6.4 Isolation Resistance 7. FEATURE CHARACTERISTICS 7.1 Switching Frequency 7.2 ON/OFF Control 7.2.1 Logic High 7.2.2 Logic Low 7.3 Output Voltage Trim Range 7.4 Output Over-Voltage Protection 8 GENERAL SPECIFICATIONS 8.1 Weight 8.2 Over-Temperature Shutdown ( NTC resistor ) 8.3.MTBF NOTES and CONDITIONS HA1SV24002 Min. Typ. Max. Units 53 110 154 250 100 125 3000 Vdc Vdc °C °C Vrms 53 110 154 Vdc 49 46 51 48 53 50 Vdc Vdc 154 158 158 162 1.1 18.3 10 35 162 166 1.2 30 30 Vdc Vdc A mA mA mA 23.8 24 ±0.05 ±0.01 ±0.004 24.2 ±0.2 ±0.2 ±0.007 Vdc % % %/℃ 70 23 2.7 100 35 2.1 3.0 mV mV A A 110V, 0.1A/µs 50% Io.max to 75% 75% Io.max to 50% 600 700 1200 1200 mV mV 100 80 50 Resistance load 50 48 25 300 ms ms ms µF 87 84 88.5 85.5 % % 3000 1500 1500 100 Vac Vac Vac MΩ 300 kHz EN50155