PC02S0505A

PC02S/D series 2W DC/DC CONVERTER, SIP-Package FEATURES Š Efficiency up to 83% Š SIP Package with Industry Standard Pinout Š Package Dimension : 19.5 x 10.2 x 7.6 mm (0.77”x 0.4”x 0.3”) Š Isolation Voltage 1000 VDC Š Operating Temperature Range -40°C to +85°C Š Single and Dual Outputs Š >2 MHours MTBF Š Lead free, RoHs compliant Š 3 Years Product Warranty The PC02S/D series are miniature, SIP Package, isolated 2W DC/DC converters with 1,000VDC isolation. It offers short circuit protection and allows a wide operating temperature range of –40°C to +85°C. These isolated DC/DC converters are the latest offering from a world leader in power systems technology and manufacturing ― Delta Electronics, Inc Model List Model Number Input Voltage (Range) Output Voltage VDC VDC 3.3 5 12 15 ±5 ±12 ±15 3.3 5 12 15 ±5 ±12 ±15 3.3 5 12 15 ±5 ±12 ±15 PC02S0503A PC02S0505A PC02S0512A 5 PC02S0515A (4.5 ~ 5.5) PC02D0505A PC02D0512A PC02D0515A PC02S1203A PC02S1205A PC02S1212A 12 PC02S1215A (10.8 ~ 13.2) PC02D1205A PC02D1212A PC02D1215A PC02S2403A PC02S2405A PC02S2412A 24 PC02S2415A (21.6 ~ 26.4) PC02D2405A PC02D2412A PC02D2415A DS_PC02S/D_10082012 Output Current Max. Min. mA 500 400 165 133 ±200 ±83 ±66 500 400 165 133 ±200 ±83 ±66 500 400 165 133 ±200 ±83 ±66 mA 10 8 3 2.5 ±4 ±1.5 ±1 10 8 3 2.5 ±4 ±1.5 ±1 10 8 3 2.5 ±4 ±1.5 ±1 Input Current Load Regulation Max. capacitive Load % (max.) 11 11 7 7 10 7 7 8 8 5 5 8 5 5 8 8 5 5 8 5 5 uF @Max. Load @No Load mA(typ.) 452 526 495 499 519 504 501 185 212 200 200 210 201 200 92 108 101 101 105 102 100 mA(typ.) 60 30 15 470 390* 470 390* 470 3908 Efficiency (typ.) @Max. Load % 73 76 80 80 77 79 79 74 78 82 83 79 82 82 74 77 81 82 79 81 82 * For each output E-mail: DCDC@delta.com.tw http://www.delta.com.tw/dcdc P1 Input Characteristics Parameter Model 5V Input Models 12V Input Models 24V Input Models 5V Input Models 12V Input Models 24V Input Models Input Voltage Range Input Surge Voltage (1 sec. max.) Reverse Polarity Input Current Input Filter Internal Power Dissipation Min. 4.5 10.8 21.6 -0.7 -0.7 -0.7 --- Typ. 5 12 24 --------- All Models Max. 5.5 13.2 26.4 9 18 30 0.3 Unit VDC 650 mW A Pi Filter --- --- Output Characteristics Parameter Output Voltage Accuracy Output Voltage Balance Line Regulation Load Regulation Ripple & Noise (20MHz) Ripple & Noise (20MHz) Ripple & Noise (20MHz) Temperature Coefficient Short Circuit Protection Conditions Dual Output, Balanced Loads For Vin Change of 1% Io=20% to 100% Over Line, Load & Temp. Min. ------- Typ. Max. ±1.0 ±3.0 ±0.1 ±1.0 ±1.2 ±1.5 See Model Selection Guide 100 150 --200 --15 ±0.01 ±0.02 0.5 Second Max. --------- Unit % % % mV P-P mV P-P mV rms %/℃ General Characteristics Parameter I/O Isolation Voltage (rated) Conditions Min. Typ. Max. Unit 60 Seconds 1000 --- --- VDC I/O Isolation Resistance 500 VDC 1000 --- --- MΩ I/O Isolation Capacitance 100KHz, 1V --- 80 120 pF 50 80 100 KHz 2,000,000 ----- ----- Hours Switching Frequency MTBF (calculated) MIL-HDBK-217F@25℃, Ground Benign Recommended Outside Input Fuse 5V Input Models 12V Input Models 24V Input Models 1000mA Slow-Blow Type 500mA Slow-Blow Type 200mA Slow-Blow Type Environmental Specifications Parameter Conditions Min. Max. Unit Ambient -40 +85 ℃ Case Temperature --- +90 ℃ Storage Temperature Range -50 +125 ℃ Humidity (non condensing) --- 95 % rel. H 260 ℃ Operating Temperature Range (with Derating) Cooling Free-Air convection Lead Temperature (1.5mm from case for 10Sec.) --- DS_PC02S/D_10082012 E-mail: DCDC@delta.com.tw http://www.delta.com.tw/dcdc P2 Output Power (%) Power Derating Curve Notes 1 2 3 4 5 Specifications typical at Ta=+25℃, resistive load, nominal input voltage and rated output current unless otherwise noted. Ripple & Noise measurement bandwidth is 0-20MHz. These power converters require a minimum output loading to maintain specified regulation, operation under no-load conditions will not damage these modules; however they may not meet all specifications listed. All DC/DC converters should be externally fused at the front end for protection. Specifications subject to change without notice. Mechancial Drawing Mechanical Dimensions Pin Connections 0.5 [0.02] 2.35 [0.09] 2.54 5.08 [0.10] [0.20] Single Output Dual Output +Vin 1 +Vin 10.2 [0.40] 0.5 [0.02] Pin 2 -Vin -Vin 4 -Vout -Vout 5 No Pin Common 3.2 [0.13] 19.5 [0.77] 6 +Vout +Vout 2X2.54 [2X0.10] 7.6 [0.30] 18.5 [0.73] Bottom View 2 0.50 [0.02] 4 5 6 0.25 [0.01] 1.3 [0.05] 1 ►All dimensions in mm (inches) ►Tolerance: X.X±0.25 (X.XX±0.01) X.XX±0.13 ( X.XXX±0.005) ► Pins ±0.05(±0.002) Physical Outline Case Size : 19.5x7.6x10.2mm (0.77x0.30x0.40 Inches) Case Material : Non-Conductive Black Plastic (flammability to UL 94V-0 rated) Weight : 2.7g DS_PC02S/D_10082012 E-mail: DCDC@delta.com.tw http://www.delta.com.tw/dcdc P3 Part Numbering System P C 02 S 05 05 A Form factor Family series Watt Number of Outputs Input Voltage Output Voltage Option Code D-DIP P-SIP S-SMD A~Z 01:1W 02:2W 03:3W 04:4W 06:6W 03:3.3V 05: 5V 12:12V 24: 24V 48:48V 03:3.3V 05: 5V 12:12V 15: 15V 24: 24V A - Std. Functions S - Single D- Dual WARRANTY Delta offers a three(3) years limited warranty. Complete warranty information is listed on our web site or is available upon request from Delta. Information furnished by Delta is believed to be accurate and reliable. However, no responsibility is assumed by Delta for its use, nor for any infringements of patents or other rights of third parties, which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Delta. Delta reserves the right to revise these specifications at any time, without notice. DS_PC02S/D_10082012 E-mail: DCDC@delta.com.tw http://www.delta.com.tw/dcdc P4