PMT-24V350W1AG

TECHNICAL DATASHEET PMT Panel Mount Power Supply 24V 350W 1 Phase / PMT-24V350W1A□ PMT Highlights & Features • • • • • AC input range selectable by switch Full Aluminium casing for light weight and corrosion resistant handling Built-in automatic fan speed control circuit MTBF > 700,000 hrs. as per Telcordia SR-332 Short Circuit / Overvoltage / Overload / Over Temperature Protections Safety Standards CB Certified for worldwide use Model Number: PMT-24V350W1A☐ Unit Weight: 0.82 kg (1.81 lb) Dimensions (L x W x D): 215 x 115 x 50 mm (8.46 x 4.53 x 1.97 inch) General Description The PMT-24V350W1A☐ offers a nominal output voltage of 24V with a wide operating temperature range from -10°C to +70°C and can withstand shock and vibration according to IEC 60068-2. In addition to features like overvoltage and overload protections, Delta’s PMT series of panel mount power supplies is unlike many other brands in the same price level. The PMT series is designed for cost competitive markets without compromising the quality of the components and product specifications. The series of products has an expected life time of 10 years and will have no output power de-rating from 100Vac to 132Vac & 200Vac to 264Vac. Model Information PMT Panel Mount Power Supply Model Number Input Voltage Range Rated Output Voltage Rated Output Current PMT-24V350W1A☐ 90-132Vac, 180-264Vac (Selectable by Switch) 24Vdc 14.6A Model Numbering PM T– 24V 350W 1 A □ Panel Mount Product Type T – Enclosed Output Voltage Output Power Single Phase No PFC Connector Type With UL, TUV, CE K – Front Face R – Terminal Block* With UL, CE G – Front Face M – Terminal Block* K, G R, M* *Options 1 All parameters are specified at 25°C ambient and AC input unless otherwise indicated. www.DeltaPSU.com (December 2016, Rev. 04) TECHNICAL DATASHEET PMT Panel Mount Power Supply 24V 350W 1 Phase / PMT-24V350W1A□ Specifications Input Ratings / Characteristics Nominal Input Voltage 100-120Vac, 200-240Vac (Selectable by Switch) Input Voltage Range 90-132Vac, 180-264Vac (Selectable by Switch) Nominal Input Frequency 50-60Hz Input Frequency Range 47-63Hz Input Current < 7.00A @ 115Vac, < 4.00A @ 230Vac Efficiency at 100% Load > 87.0% @ 230Vac Max Inrush Current (Cold Start) < 50A @ 115Vac, < 60A @ 230Vac Leakage Current < 3.5mA @ 240Vac Output Ratings / Characteristics* Nominal Output Voltage 24Vdc Factory Set Point Tolerance 24Vdc ± 2% Output Voltage Adjustment Range 20.0-26.4Vdc Output Current 14.6A Output Power 350.4W Line Regulation ± 0.5% typ. Load Regulation ± 0.5% typ. PARD** (20MHz) < 150mVpp Rise Time < 50ms @ nominal input (100% load) Start-up Time < 1000ms @ nominal input (100% load) Hold-up Time > 16ms @ 115Vac, > 20ms @ 230Vac Dynamic Response (Overshoot & Undershoot O/P Voltage) ± 5% @ 10-50% load and 50-100% load Start-up with Capacitive Loads 8,000µF Max *For power de-rating from 50°C to 70°C, see power de-rating on page 3. **PARD is measured with an AC coupling mode, 5cm wires, and in parallel with 0.1µF ceramic capacitor & 47µF electrolytic capacitor. Mechanical Case Chassis / Cover Aluminium Dimensions (L x W x D) 215 x 115 x 50 mm (8.46 x 4.53 x 1.97 inch) Unit Weight 0.82 kg (1.81 lb) Indicator Green LED (DC OK) Cooling System Forced Cooling Terminal Wire 2 PMT-24V350W1AK PMT-24V350W1AG M3.5 x 9 Pins (Rated 300V/20A) PMT-24V350W1AR PMT-24V350W1AM M3.5 x 9 Pins (Rated 300V/15A) AWG 20-12 All parameters are specified at 25°C ambient and AC input unless otherwise indicated. www.DeltaPSU.com (December 2016, Rev. 04) TECHNICAL DATASHEET PMT Panel Mount Power Supply 24V 350W 1 Phase / PMT-24V350W1A□ Environment Surrounding Air Temperature Operating -10°C to +70°C Storage -25°C to +85°C Power De-rating Operating Humidity > 50°C de-rate power by 2.5% / °C < 100Vac de-rate power by 3% / V < 200Vac de-rate power by 3% / V 5 to 95% RH (Non-Condensing) Operating Altitude 0 to 5,000 Meters (16,400 ft.) Shock Test (Non-Operating) IEC 60068-2-27, Half Sine: 50G for a duration of 11ms, 3 times per direction, 18 times in total Vibration Operating Non-Operating Pollution Degree IEC 60068-2-6, Sine Wave: 10Hz to 150Hz @ 25m/S² (2.5G peak); 90 min per axis for all X, Y, Z direction IEC 60068-2-6, Random: 5Hz to 500Hz @ 2.09Grms peak; 20 min per axis for all X, Y, Z direction 2 Protections Overvoltage < 32.4V, SELV Output, Latch Mode Overload / Overcurrent < 25A of rated load current, Hiccup Mode, Non-Latching (Auto-Recovery) Over Temperature Hiccup Mode, Non-Latching (Auto-Recovery when the fault is removed) Short Circuit Hiccup Mode, Non-Latching (Auto-Recovery when the fault is removed) Internal Fuse T10AH Protection Against Shock Class I with PE* connection *PE: Primary Earth Reliability Data MTBF > 700,000 hrs. as per Telcordia SR-332 I/P: 100Vac, O/P: 100% load, Ta: 35°C Expected Cap Life Time 10 years (115Vac & 230Vac, 50% load @ 40°C) 3 All parameters are specified at 25°C ambient and AC input unless otherwise indicated. www.DeltaPSU.com (December 2016, Rev. 04) TECHNICAL DATASHEET PMT Panel Mount Power Supply 24V 350W 1 Phase / PMT-24V350W1A□ Safety Standards / Directives Electrical Safety TUV Bauart UL/cUL recognized CB scheme PMT-24V350W1AK / PMT-24V350W1AR: EN 60950-1 UL 60950-1 and CSA C22.2 No. 60950-1 (File No. E131881) IEC 60950-1 UL/cUL recognized CB scheme PMT-24V350W1AG / PMT-24V350W1AM: UL 60950-1 and CSA C22.2 No. 60950-1 (File No. E131881) IEC 60950-1 CE In conformance with EMC Directive 2014/30/EU and Low Voltage Directive 2014/35/EU Material and Parts Galvanic Isolation RoHS Directive 2011/65/EU Compliant Input to Output 3.0KVac Input to Ground 1.5KVac Output to Ground 0.5KVac EMC Emissions (CE & RE) PMT-24V350W1AK / PMT-24V350W1AR: CISPR 22, EN 55022, EN 55011, FCC Title 47: Class B PMT-24V350W1AG / PMT-24V350W1AM: CISPR 22, EN 55022, FCC Title 47: Class A (With Delta EMI filter P/N: 10DKAW5) Immunity EN 55024 1) Electrostatic Discharge IEC 61000-4-2 Level 4 Criteria A Air Discharge: 15kV Contact Discharge: 8kV Level 3 Criteria A1) 80MHz-1GHz, 10V/M with 1kHz tone / 80% modulation Radiated Field IEC 61000-4-3 Electrical Fast Transient / Burst IEC 61000-4-4 Level 3 Criteria A 2kV Surge IEC 61000-4-5 Conducted IEC 61000-4-6 Level 3 Criteria A1) 2) Common Mode : 2kV Differential Mode3): 1kV 1) Level 3 Criteria A 150kHz-80MHz, 10Vrms Power Frequency Magnetic Fields IEC 61000-4-8 1) 1) Criteria A 10A/Meter Voltage Dips IEC 61000-4-11 100% dip; 1 cycle (20ms); Self Recoverable Low Energy Pulse Test (Ring Wave) IEC 61000-4-12 Level 3 Criteria A1) 2) Common Mode : 2kV 3) Differential Mode : 1kV NA Harmonic Current Emission Voltage Fluctuation and Flicker* PMT-24V350W1AK / PMT-24V350W1AR: IEC/EN 61000-3-3 *Fulfills tested conditions 1) Criteria A: Normal performance within the specification limits 2) Asymmetrical: Common mode (Line to earth) 3) Symmetrical: Differential mode (Line to line) Block Diagram 4 All parameters are specified at 25°C ambient and AC input unless otherwise indicated. www.DeltaPSU.com (December 2016, Rev. 04) TECHNICAL DATASHEET PMT Panel Mount Power Supply 24V 350W 1 Phase / PMT-24V350W1A□ Device Description PMT-24V350W1AK / PMT-24V350W1AG: Front Face 1) 2) 3) 4) 5 PMT-24V350W1AR / PMT-24V350W1AM: Terminal Block Input & Output terminal block connector DC voltage adjustment potentiometer DC OK control LED (Green) AC selectable switch All parameters are specified at 25°C ambient and AC input unless otherwise indicated. www.DeltaPSU.com (December 2016, Rev. 04) TECHNICAL DATASHEET PMT Panel Mount Power Supply 24V 350W 1 Phase / PMT-24V350W1A□ Dimensions PMT-24V350W1AK / PMT-24V350W1AG: Front Face L x W x D: 215 x 115 x 50 mm (8.46 x 4.53 x 1.97 inch) 6 All parameters are specified at 25°C ambient and AC input unless otherwise indicated. www.DeltaPSU.com (December 2016, Rev. 04) TECHNICAL DATASHEET PMT Panel Mount Power Supply 24V 350W 1 Phase / PMT-24V350W1A□ PMT-24V350W1AR / PMT-24V350W1AM: Terminal Block L x W x D: 215 x 115 x 50 mm (8.46 x 4.53 x 1.97 inch) 7 All parameters are specified at 25°C ambient and AC input unless otherwise indicated. www.DeltaPSU.com (December 2016, Rev. 04) TECHNICAL DATASHEET PMT Panel Mount Power Supply 24V 350W 1 Phase / PMT-24V350W1A□ Engineering Data Output Load De-rating VS Surrounding Air Temperature Note 1. 2. 3. 4. Fig. 1 De-rating for Vertical and Horizontal Mounting Orientation > 50°C de-rate power by 2.5% / °C 5. Power supply components may degrade, or be damaged, when the power supply is continuously used outside the shaded region, refer to the graph shown in Fig. 1. If the output capacity is not reduced when the surrounding air temperature >50°C, the device will run into Over Temperature Protection. When activated, the output voltage will go into bouncing mode and will when the surrounding air recover temperature is lowered or the load is reduced as far as necessary to keep the device in working condition. In order for the device to function in the manner intended, it is also necessary to keep a safety distance of ≥ 20 mm (0.79 inch) with adjacent units while the device is in operation. Depending on the surrounding air temperature and output load delivered by the power supply, the device housing can be very hot! If the device has to be mounted in any other orientation, please contact info@deltapsu.com for more details. Output Load De-rating VS Input Voltage  8 No output power de-rating for the input voltage from 100Vac to 132Vac & 200Vac to 264Vac All parameters are specified at 25°C ambient and AC input unless otherwise indicated. www.DeltaPSU.com (December 2016, Rev. 04) TECHNICAL DATASHEET PMT Panel Mount Power Supply 24V 350W 1 Phase / PMT-24V350W1A□ Assembly & Installation Ⓐ Ⓑ Ⓒ Ⓓ Side Mounting: Fig. 2 and Fig. 3 show the mounting hole locations for power supply assembly onto a metal mounting surface. The power supply shall be mounted on minimum of 4 mounting holes using M4 screw maximum 5 mm (0.20 inch) length (Refer to Fig. 4). This is to maintain a safety distance between the screw and internal components. Base Mounting: Fig. 2 and Fig. 3 show the mounting hole locations for power supply assembly onto a metal mounting surface. The power supply shall be mounted on minimum of 4 mounting holes using M4 screw maximum 4 mm (0.16 inch) length (Refer to Fig. 4). Connector This surface belongs to customer’s end system or panel where the power supply is mounted. Base Mounting (Horizontal) Base Mounting (Vertical) Fig. 2 • • Side Mounting (Horizontal) Recommended Mounting Orientations Use flexible cable (stranded or solid) of AWG No. 20-12. The input/output connectors’ allowable current is 23A max per pin. User should calculate and select the suitable wire specification (type/quantity/diameter) according to actual output current. The torque at the connector shall not exceed 13 Kgf.cm (11.23 lbf.in). The insulation stripping length should not exceed 0.275” or 7 mm. Recommended mounting torque of the product and its mounting accessories is 9~12 Kgf.cm (7.81~10.42 lbf.in). Safety Distance D1 = 4mm Min. D2 = 20mm Min. Fig. 3 Mounting Hole Locations Ensure the mounted device is kept at ≥ 4 mm (0.16 inch) safety distance at all sides from other components and equipments. In addition, to ensure sufficient convection cooling, always maintain a distance of ≥ 20 mm (0.79 inch) from fan ventilated surfaces while the device is in operation. Please insert an insulation sheet between the system and product, if the safety distance is < 4mm (0.16 inch).   Fig. 4 9 Only use M4 screw ≤ 5 mm (0.20 inch) through the base mounting holes at Ⓐ. This is to keep a safe distance between the screw and internal components. Only use M4 screw ≤ 4 mm (0.16 inch) through the base mounting holes at Ⓑ. This is to keep a safe distance between the screw and internal components. Assembly Reference All parameters are specified at 25°C ambient and AC input unless otherwise indicated. www.DeltaPSU.com (December 2016, Rev. 04) TECHNICAL DATASHEET PMT Panel Mount Power Supply 24V 350W 1 Phase / PMT-24V350W1A□ Safety Instructions • • • • • • • Must select correct AC input voltage before turning on (Refer to the “Device Description” on Page 5). If user’s mounting orientation is not according to the recommended mounting orientations, please consult Delta for further information. The device is not recommended to be placed on low thermal conductive surface. For example, plastics. The enclosure of the device can become very hot depending on the ambient temperature and load of the power supply. Do not touch the device while it is in operation or immediately after power is turned OFF. Risk of burning! Do not touch the terminals while power is being supplied. Risk of electric shock. Prevent any foreign metal, particles or conductors from entering the device through the openings during installation. It may cause electric shock, safety hazard, fire and/or product failure. Warning: When connecting the device, secure Earth connection before connecting L and N. When disconnecting the device, remove L and N connections before removing the Earth connection. The power supply must be mounted by metal screws onto a grounded metal surface. It is highly recommended that the Earth terminal on the connector be connected to the grounded metal surface. Accessories LM-01: Top Fixing Bracket • • 10 This bracket is used to fix the power supply onto a flat surface from the top. All parameters are specified at 25°C ambient and AC input unless otherwise indicated. www.DeltaPSU.com (December 2016, Rev. 04) TECHNICAL DATASHEET PMT Panel Mount Power Supply 24V 350W 1 Phase / PMT-24V350W1A□ Functions Start-up Time The time required for the output voltage to reach 90% of its final steady state set value, after the input voltage is applied. Rise Time The time required for the output voltage to change from 10% to 90% of its final steady state set value. Hold-up Time Time between the collapse of the AC input voltage, and the output falling to 95% of its steady state set value. ■ Graph illustrating the Start-up Time, Rise Time, and Hold-up Time Inrush Current Dynamic Response Inrush current is the peak, instantaneous, input current measured and, occurs when the input voltage is first applied. For AC input voltages, the maximum peak value of inrush current will occur during the first half cycle of the applied AC voltage. This peak value decreases exponentially during subsequent cycles of AC voltage. The power supply output voltage will remain within ±1000mVpp of its steady state value, when subjected to a dynamic load from 10 to 50% and 50 to 100% of its rated current. 11  10 to 50% Load  50 to 100% Load All parameters are specified at 25°C ambient and AC input unless otherwise indicated. www.DeltaPSU.com (December 2016, Rev. 04) TECHNICAL DATASHEET PMT Panel Mount Power Supply 24V 350W 1 Phase / PMT-24V350W1A□ Overload & Overcurrent Protections (Auto-Recovery) Overvoltage Protection (Auto-Recovery) The power supply’s Overload (OLP) and Overcurrent (OCP) Protections will be activated when output current exceeds >25A of rated load current. In such occurrence, the VO will start to droop and once the power supply has reached its maximum power limit, the protection is activated and the power supply will go into “Hiccup mode” (Auto-Recovery). The power supply will recover once the fault condition of the OLP and OCP is removed and IO is back within the specifications. The power supply’s overvoltage circuit will be activated when its internal feedback circuit fails. The output voltage shall not exceed its specifications defined on Page 3 under “Protections”. Over Temperature Protection (Auto-Recovery) It is not recommended to prolong the duration of IO when it is 14.6A, since it may cause damage to the PSU. As described in load de-rating section, the power supply also has Over Temperature Protection (OTP). In the event of a higher operating temperature at 100% load, the power supply will run into OTP when the operating temperature is beyond what is recommended in the de-rating graph. When activated, the output voltage will go into bouncing mode until the temperature drops to its normal operating temperature as recommended in the derating graph. Short Circuit Protection (Auto-Recovery) The power supply’s output OLP/OCP function also provides protection against short circuits. When a short circuit is applied, the output current will operate in “Hiccup mode”, as shown in the illustration in the OLP/OCP section on this page. The power supply will return to normal operation after the short circuit is removed. 12 All parameters are specified at 25°C ambient and AC input unless otherwise indicated. www.DeltaPSU.com (December 2016, Rev. 04) TECHNICAL DATASHEET PMT Panel Mount Power Supply 24V 350W 1 Phase / PMT-24V350W1A□ Operating Mode  Redundant Operation PSU 1 PSU 2 DRR-40N or DRR-40A LOAD Terminal Com KEY DC OK Signal Terminal N L (L1) N (L2) PE Fig. 5 + Output PSU 1 + Output PSU 2 – Common Signal Redundant Operation Connection Diagram In order to ensure proper redundancy operation for the power supply unit (PSU), ensure that the output voltage difference between the two units is kept at 0.45~0.50V for 24V supplies. Follow simple steps given below to set them up for the redundant operation: Step 1. Measure output voltage of PSU 1 and PSU 2. If PSU 1 is the master unit, then VO of PSU 1 must be higher than PSU 2. In order to set the output voltage, individually connect the power supply to 50% of rated load, and set the PSU 1 and PSU 2 output voltage. Step 2. Connect the power supply units PSU 1 and PSU 2 to Vin 1 & Vin 2, respectively, of the DRR-40N (or 40A) module shown on the right of above diagram. Step 3. Connect the system load from Vout. Please note that output voltage Vout from DRR module will be = VO (output voltage of power supply) – Vdrop* (in DRR module). *Vdrop will vary from 0.60V to 0.90V (Typical 0.65V) depending on the load current and surrounding air temperature.  Parallel Operation The power supply units (PSUs) can also be used for parallel operation in order to increase the output power. The difference in output voltage between the two units must be kept to within 25mV of each other. This difference must be verified with the same output load connected independently to each unit. Parameters such as EMI, inrush current, leakage current, PARD, start up time will be different from those on the datasheet, when two units are connected in parallel. The user will need to verify that any differences will still allow the two power supplies connected in parallel will work properly in their product/application. Fig. 6 13 Parallel Operation Connection Diagram All parameters are specified at 25°C ambient and AC input unless otherwise indicated. www.DeltaPSU.com (December 2016, Rev. 04) TECHNICAL DATASHEET PMT Panel Mount Power Supply 24V 350W 1 Phase / PMT-24V350W1A□ Others Delta RoHS Compliant Restriction of the usage of hazardous substances The European directive 2011/65/EU limits the maximum impurity level of homogeneous materials such as lead, mercury, cadmium, chrome, polybrominated flame retardants PBB and PBDE for the use in electrical and electronic equipment. RoHS is the abbreviation for “Restriction of the use of certain hazardous substances in electrical and electronic equipment”. This product conforms to this standard. 14 All parameters are specified at 25°C ambient and AC input unless otherwise indicated. www.DeltaPSU.com (December 2016, Rev. 04)