S24SE12003PDFH

S24SE/S24DE series 30W Single/Dual Output DC/DC Converter FEATURES  Efficiency up to 89%  Wide input range, 9V-36V  Package with Industry Standard Pinout  Package Dimension: 25.4 x25.4 x10.2mm (1.0” x1.0” x0.40”)(No HSK)  Over voltage protection, hiccup mode  Over current protection, hiccup mode  Positive or Negative Remote ON/OFF  Without tantalum capacitor inside module  Operating Temperature range - 40°C to +85°C  Input to Output Isolation: 1600VDC  RoHS Compliant  2 Years Product Warranty  Heat-sink is option  UL60950, 2nd Edition, 2011-12-19 Recognized  EN50155 compliance for Week 1618 datecode afterwards The S24SE/S24DE family, the highest power density (30W), supplies industrial 1”X1” isolated power converter whose pinout follows industry standard. The S24SE/S24DE series comes with a host of industry-standard features, such as over current protection, over voltage protection, over temperature protection and remote on/off. An optional heatsink is available for more extreme thermal requirements. All models have an ultra-wide 4:1 input voltage range (9V to 36V). With operating temperature of -40°C to +85°C, it is suitable for customers’ critical applications, such as process control and automation, transportation, data communication and telecom equipment, test equipment, medical device and everywhere where space on the PCB is critical. Model List Model Input Output Number Voltage Voltage (Range) S24SE3R307 S24SE05006 S24SE12003 S24SE15002 S24DE12001 S24DE15001 Output Current Max. Min. Input Current Load Maxcapacitive (typ input voltage) Regulation Load @Max. Load @No Load Efficiency (typ.) @Max. Load VDC VDC mA mA mA(typ.) mA(typ.) mV uF % 24 (9 ~ 36) 3.3V 5.0V 12V 15V ±12V ±15V 7500 6000 2500 2000 1250 1000 0 0 0 0 0 0 1170 1450 1450 1450 1450 1450 55 55 20 20 25 25 ±10 ±10 ±12 ±15 ±120 ±150 10000 10000 1000 1000 ±1000 ±680 88% 89% 88% 88% 88% 88% Input Characteristics Item Input Surge Voltage (100 msec) Input Turn-On Voltage Threshold Input Turn-Off Voltage Threshold Input Under-Voltage Lockout Hysteresis Off-Converter Input Current Input reflected ripple current Reverse Polarity Input Current ON/OFF Control, Logic High ON/OFF Control, Logic Low Input Filter DS_S24SE/S24DE 30W_07152020 Model All Models All Models All Models All Models All Models All Models, with 12uH, 20MHz All Models All Models All Models All Models Min. Typ. 8 7 0.4 8.5 7.5 1 6 5 --- --2.4 -0.7 Max. 50 9 8 1.7 20 0.3 10 0.8 Internal PI Filter Unit VDC VDC VDC VDC mA mA A VDC VDC E-mail: dcdc@deltaww.com http://www.deltaww.com/dcdc P1 S24SE/S24DE series 30W Single/Dual Output DC/DC Converter Output Characteristics Item Output Voltage Accuracy Output Voltage Balance Line Regulation Cross Regulation Total Output Voltage Range Ripple & Noise Ripple & Noise Dynamic load response Output Over Current Protection Short Output Protection Output Over-Voltage Protection Output Trim Range Conditions Dual Output, Balanced Loads Single output Dual output Dual output, Asymmetrical Load 25%-100% Full Load Over Load, Line and Temperature 12V, 15V, ±12V, ±15V 3.3V, 5.0V 50%-75% full load, 0.1A/uS Output Voltage 10% Low, Hiccup Long Term, Auto-recovery Hiccup, Auto-recovery Single Output Min. ----- ----- Typ. ±1.0 ±1.0 ±0.1 ±0.1 Max. ±2.0 ±2.0 ±0.2 ±0.5 Unit %Vo %Vo %Vo %Vo ±2 ±3 %Vo --50 50 3 ±3 ----- 110 160 %Vo mV P-P mV P-P %Vo %Io,max 115 -10 150 +10 %Vo %Vo General Characteristics Item Conditions Min. Typ. Max. Unit I/O Isolation Voltage (rated) --- --- 1600 VDC I/O Isolation Resistance 10 --- --- MΩ I/O Isolation Capacitance 1100 pF Switching Frequency 550 KHz Environmental Specifications Parameter Conditions Min. Max. Unit Ambient -40 +85 ℃ Case Temperature(9Vin/24Vin/36Vin) --- 95/105/105 ℃ Storage Temperature Range -55 +125 ℃ Humidity (non condensing) --- 95 % rel. H Operating Temperature Range (with Derating) NTC Shutdown temperature Cooling DS_S24SE/S24DE 30W_07152020 125 ℃ Natural Convection E-mail: dcdc@deltaww.com http://www.deltaww.com/dcdc P2 S24SE/S24DE series 30W Single/Dual Output DC/DC Converter Thermal Derating Curves (No Heat Sink and With Heat Sink) Notes 1 Specifications typical at Ta=+25℃, resistive load, nominal input voltage and rated output current unless otherwise noted. 2 Ripple & Noise measurement bandwidth is 0-20MHz, with 10µF, tantalum capacitor and 1µF ceramic capacitor. 3 All DC/DC converters should be externally fused at the front end for protection. 4 Specifications are subject to change without notice. DS_S24SE/S24DE 30W_07152020 E-mail: dcdc@deltaww.com http://www.deltaww.com/dcdc P3 S24SE/S24DE series 30W Single/Dual Output DC/DC Converter ELECTRICAL CHARACTERISTICS CURVES - S24SE3R307, 9-36VIN, 3.3V/7.5A Efficiency vs. load current for various input voltage at 25°C. Turn-on transient at full load current (10ms/div). Top Trace: Vout; 1V/div; Bottom Trace: ON/OFF input: 5V/div. Power dissipation vs. load current at 25°C . Turn-on transient at full load current (10 ms/div). Top Trace: Vout; 1V/div; Bottom Trace: input voltage: 20V/div. Output voltage ripple at nominal input voltage and max load current (5 mV/div, 2us/div) Load cap: 10µF, tantalum capacitor and 1µF ceramic capacitor. Bandwidth: 20 MHz. DS_S24SE/S24DE 30W_07152020 E-mail: dcdc@deltaww.com http://www.deltaww.com/dcdc P4 S24SE/S24DE series 30W Single/Dual Output DC/DC Converter ELECTRICAL CHARACTERISTICS CURVES - S24SE05006, 9-36VIN, 5.0V/6A 5.5 87 5.0 POWER DISSIPATION(W) 90 EFFICIENCY(%) 84 81 36Vin 78 24Vin 75 9Vin 72 69 66 9Vin 4.5 24Vin 4.0 3.5 36Vin 3.0 2.5 2.0 1.5 63 1.0 60 0.5 0.6 1.2 1.8 2.4 3 3.6 4.2 4.8 5.4 6 OUTPUT CURRENT(A) Efficiency vs. load current for various input voltage at 25°C. Turn-on transient at full load current (10ms/div). Top Trace: Vout; 2V/div; Bottom Trace: ON/OFF input: 5V/div. 0.6 1.2 1.8 2.4 3 3.6 4.2 4.8 5.4 6 OUTPUT CURRENT(A) Power dissipation vs. load current at 25°C . Turn-on transient at full load current (10 ms/div). Top Trace: Vout; 2V/div; Bottom Trace: input voltage: 8V/div. Output voltage ripple at nominal input voltage and max load current (20 mV/div, 2us/div) Load cap: 10µF, tantalum capacitor and 1µF ceramic capacitor. Bandwidth: 20 MHz. DS_S24SE/S24DE 30W_07152020 E-mail: dcdc@deltaww.com http://www.deltaww.com/dcdc P5 S24SE/S24DE series 30W Single/Dual Output DC/DC Converter ELECTRICAL CHARACTERISTICS CURVES - S24SE12003, 9-36VIN, 12V/2.5A 90 5.5 5.1 POWER DISSIPATION(W) 88 EFFICIENCY(%) 86 84 36Vin 24Vin 82 9Vin 80 78 4.7 36Vin 4.3 3.9 24Vin 3.5 3.1 9Vin 2.7 2.3 1.9 1.5 76 1.1 74 0.7 0.25 0.5 0.75 1 1.25 1.5 1.75 OUTPUT CURRENT(A) 2 2.25 2.5 Efficiency vs. load current for various input voltage at 25°C. Turn-on transient at full load current (4ms/div). Top Trace: Vout; 5V/div; Bottom Trace: ON/OFF input: 5V/div. 0.25 0.5 0.75 1 1.25 1.5 1.75 2 2.25 2.5 OUTPUT CURRENT(A) Power dissipation vs. load current at 25°C . Turn-on transient at full load current (4 ms/div). Top Trace: Vout; 5V/div; Bottom Trace: input voltage: 8V/div. Output voltage ripple at nominal input voltage and max load current 10 mV/div, 2us/div) Load cap: 10µF, tantalum capacitor and 1µF ceramic capacitor. Bandwidth: 20 MHz. DS_S24SE/S24DE 30W_07152020 E-mail: dcdc@deltaww.com http://www.deltaww.com/dcdc P6 S24SE/S24DE series 30W Single/Dual Output DC/DC Converter ELECTRICAL CHARACTERISTICS CURVES - S24SE15002, 9-36VIN, 15V/2A Efficiency vs. load current for various input voltage at 25°C. Turn-on transient at full load current (4ms/div). Top Trace: Vout; 5V/div; Bottom Trace: ON/OFF input: 5V/div. Power dissipation vs. load current at 25°C . Turn-on transient at full load current (4 ms/div). Top Trace: Vout; 5V/div; Bottom Trace: input voltage: 8V/div. Output voltage ripple at nominal input voltage and max load current 10 mV/div, 2us/div) Load cap: 10µF, tantalum capacitor and 1µF ceramic capacitor. Bandwidth: 20 MHz. DS_S24SE/S24DE 30W_07152020 E-mail: dcdc@deltaww.com http://www.deltaww.com/dcdc P7 S24SE/S24DE series 30W Single/Dual Output DC/DC Converter ELECTRICAL CHARACTERISTICS CURVES - S24DE12001, 9-36VIN, ± 12V/1.25A 5.5 89 36Vin 5.0 POWER DISSIPATION(W) 87 EFFICIENCY(%) 85 83 36Vin 81 79 24Vin 9Vin 77 4.5 24Vin 4.0 3.5 3.0 9Vin 2.5 2.0 1.5 75 1.0 73 0.125 0.25 0.375 0.5 0.5 0.625 0.75 0.875 1 1.125 1.25 OUTPUT CURRENT(A) Efficiency vs. load current for various input voltage at 25°C. Turn-on transient at full load current (4ms/div). Top two Traces: Vout; 6V/div; Bottom Trace: ON/OFF input: 5V/div. 0.125 0.25 0.375 0.5 0.625 0.75 0.875 1 1.125 1.25 OUTPUT CURRENT(A) Power dissipation vs. load current at 25°C. Turn-on transient at full load current (4 ms/div). Top two Traces: Vout; 6V/div; Bottom Trace: input voltage: 15V/div. Output voltage ripple at nominal input voltage and max load current Top trace +12V, 10 mV/div, Bottom trace -12V, 20mV/div, 2us/div. Load cap: 10µF, tantalum capacitor and 1µF ceramic capacitor. Bandwidth: 20 MHz. DS_S24SE/S24DE 30W_07152020 E-mail: dcdc@deltaww.com http://www.deltaww.com/dcdc P8 S24SE/S24DE series 30W Single/Dual Output DC/DC Converter ELECTRICAL CHARACTERISTICS CURVES - S24DE15001, 9-36VIN, ± 15V/1.0A 90 5.2 88 4.8 86 4.4 POWER DISSIPATION(W) EFFICIENCY(%) 36Vin 84 82 36Vin 80 24Vin 78 9Vin 76 24Vin 4.0 3.6 3.2 9Vin 2.8 2.4 2.0 74 1.6 72 1.2 70 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 OUTPUT CURRENT(A) Efficiency vs. load current for various input voltage at 25°C. Turn-on transient at full load current (4ms/div). Top two traces: Vout; 8V/div; Bottom Trace: ON/OFF input: 5V/div. 0.8 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 OUTPUT CURRENT(A) Power dissipation vs. load current at 25°C. Turn-on transient at full load current (4ms/div). Top two traces: Vout; 8V/div; Bottom Trace: input voltage: 15V/div. Output voltage ripple at nominal input voltage and max load current Top trace +15V, 10 mV/div, Bottom trace -15V, 20mV/div, 2us/div. Load cap: 10µF, tantalum capacitor and 1µF ceramic capacitor. Bandwidth: 20 MHz. DS_S24SE/S24DE 30W_07152020 E-mail: dcdc@deltaww.com http://www.deltaww.com/dcdc P9 S24SE/S24DE series 30W Single/Dual Output DC/DC Converter DESIGN CONSIDERATIONS Input Source Impedance The impedance of the input source connecting to the DC/DC power modules will interact with the modules and affect the stability. A low ac-impedance input source is recommended. If the source inductance is more than a few μH, we advise a 47μF electrolytic capacitor mounted close to the input of the module to improve the stability. Input Reflected Ripple Current is ic Vin+ + + Input reflected ripple current, is, through a 12µH source inductor at nominal input voltage and rated load current (5 mA/div, 2us/div) VinCs: 220uF 100uF, ESR=0.2 ohm @ 25oC 100KHz Output Ripple Noise Test set-up diagram showing measurement points for Input Terminal Ripple Current and Input Reflected Ripple Current. Measured input reflected-ripple current with a simulated source Inductance (LTEST) of 12 μH. Capacitor Cs offset possible battery impedance. Output voltage ripple test setup. Load capacitance: 1µF ceramic capacitor and 10µF tantalum capacitor. Bandwidth: 20 MHz. Scope measurements should be made using a BNC cable (length shorter than 20 inches). Position the load between 51 mm to 76 mm (2 inches to 3 inches) from the module. Input Terminal Ripple Current, ic, at full rated output current and nominal input voltage with 12µH source impedance and 100µF electrolytic capacitor (100 mA/div, 2us/div). DS_S24SE/S24DE 30W_07152020 E-mail: dcdc@deltaww.com http://www.deltaww.com/dcdc P10 S24SE/S24DE series 30W Single/Dual Output DC/DC Converter DESIGN CONSIDERATIONS Layout and EMI considerations FEATURES DESCRIPTIONS Over-Current Protection Delta’s DC/DC power modules are designed to operate in a wide variety of systems and applications. For design assistance with EMC compliance and related PWB layout issues, please contact Delta’s technical support team. An external input filter module is available for easier EMC compliance design. Below is the reference design for an input filter to pass EN55022 (VDE0878) class A (both q. peak and average). The modules include an internal output over-current protection circuit, which will endure current limiting for an unlimited duration during output overload. If the output current exceeds the OCP set point, the modules will shut down (hiccup mode). The modules will try to restart after shutdown. If the overload condition still exists, the module will shut down again. This restart trial will continue until the overload condition is corrected. Over-Voltage Protection The modules include an internal output over-voltage protection circuit, which monitors the voltage on the output terminals. If this voltage exceeds the over-voltage set point, the modules will shut down, and then restart after a hiccup-time (hiccup mode). L1=1uH C1=47uF/50V, electrolytic capacitor dBμV 80.0 If latch mode is needed, please contact with Delta. Limits 55022MAV 55022MQP 70.0 Over-Temperature Protection 60.0 50.0 40.0 Transducer 8130 Traces PK+ AV 30.0 20.0 The over-temperature protection consists of circuitry that provides protection from thermal damage. If the temperature exceeds the over-temperature threshold the module will shut down.The module will restart after the temperature is within specification. 10.0 Remote On/Off 0.0 150 kHz 1 MHz 10 MHz 30 MHz Test Result: At T = +25C, Typical input voltage and full load. Green is quasi peak mode; Blue is average mode. The remote on/off feature on the module can be either negative or positive logic depend on the part number options on the last page.   Recommended PCB Layout For Negative logic version, turns the module on during a external logic low and off during a logic high. If the remote on/off feature is not used, please short the on/off pin to Vi (-). For Postive logic version, turns the modules on during a external logic high and off during a logic low. If the remote on/off feature is not used, please leave the on/off pin to floating. Remote on/off can be controlled by an external switch between the on/off terminal and the Vi (-) terminal. The switch can be an open collector or open drain. It is suggested to use multiple layers PCB and large size copper on system board which connects to pins of module, that can achieve better thermal performance. DS_S24SE/S24DE 30W_07152020 E-mail: dcdc@deltaww.com http://www.deltaww.com/dcdc P11 S24SE/S24DE series 30W Single/Dual Output DC/DC Converter For 12V signle output (Kohm): Remote on/off implementation For 15V single output (Kohm): Output Voltage Adjustment (TRIM) Only single output modules have output adjust function. To increase the output voltage set point, connect an external resistor between the TRIM pin and the Vout(-). To decrease the output voltage set point, connect an external resistor between the TRIM pin and the Vout(+). The maximum adjust range is ±10%, the TRIM pin should be left open if this feature is not used. For 3.3V single output (Kohm): For example: When need trim up to 3.4V, then the external resistor should be 100Kohm between trim pin and Vout- pin. When need trim down to 3.1V, then the external resistor should be 40Kohm between trim pin and Vout+ pin. THERMAL CONSIDERATIONS For 5V single output (Kohm): DS_S24SE/S24DE 30W_07152020 Thermal de-rating curve is a standard for customer to make thermal evaluation and make sure the module’s components are operated under allowed temperature. The module’s cooling condition is natural convection. In thermal de-rating curve, if we know the module’s input voltage and output power we can find the allowed maximum ambient temperature. The module’s case temperature is a reference to make thermal evaluation. If the case temperature exceed the allowed maximum value, the moldule may probably have thermal issue. E-mail: dcdc@deltaww.com http://www.deltaww.com/dcdc P12 S24SE/S24DE series 30W Single/Dual Output DC/DC Converter Mechanical Drawing Mechanical Dimensions Pin Connections Single Output Pin Function Dual Output Function 1 Vin+ Vin+ 2 Vin- Vin- 3 On/off On/off 4 Vout- Vout- 5 Trim Common 6 Vout+ Vout+ Physical outline Case Size: 25.4*25.4*9.5(1.0”*1.0”*0.38”) Case material: Al alloy, anodize black Baseplate material: Non-conductive FR-4 Pin material: Brass; finish: Matte Tin plating and Nickel under plating Pin length: refer part numbering system Weight: 18.0 grams  All dimensions in mm (inches)  Tolerance: X.X±0.5 (X.XX±0.02) X.XX±0.25 ( X.XXX±0.010)  Pins Diameter : ±0.10(±0.004) Mechanical Drawing with heat sink(optional) Mechanical Dimensions Physical Outline 1 Heat sink Material: Al-6063 Finish: anodize black Weight: 4.0grams 2 Model weight: 22.2 grams  All dimensions in mm (inches)  Tolerance: X.X±0.5 (X.XX±0.02) X.XX±0.25 ( X.XXX±0.010) Note: 1. add heat sink to help heat dissipation and increase reliability of convert operating at high ambient temperature 2. please refer derating curve while upgrate the operating temperature of converter DS_S24SE/S24DE 30W_07152020 E-mail: dcdc@deltaww.com http://www.deltaww.com/dcdc P13 S24SE/S24DE series 30W Single/Dual Output DC/DC Converter Application notice: For modules with through-hole pins, they are intended for wave soldering assembly onto system boards; please do not subject such modules through reflow temperature profile. Recommended layout refer below DS_S24SE/S24DE 30W_07152020 E-mail: dcdc@deltaww.com http://www.deltaww.com/dcdc P14 S24SE/S24DE series 30W Single/Dual Output DC/DC Converter Part Numbering System S 24 S E 050 06 N Form Input Number Product Output Output On/off factor voltage of output series voltage current logic S 24 - 9~36V S - Single E - Series 050 - 5.0V 06 - 6A D - Dual No. N- D F Pin length D - 0.24” Negative P - Positive T - 0.22” R - 0.17” A Option Code F - RoHS 6/6 A - Standard. (Lead Free) (with metal case) H - With heat sink CONTACT: www.deltaww.com/dcdc Email: dcdc@deltaww.com USA: Telephone: East Coast: 978-656-3993 West Coast: 510-668-5100 Fax: (978) 656 3964 Europe: Phone: +31-20-655-0967 Fax: +31-20-655-0999 Asia & the rest of world: Telephone: +886 3 4526107 ext 6220~6226 Fax: +886 3 4513485 WARRANTY Delta offers a two (2) years limited warranty. Complete warranty information is listed on our web site or is available upon request from Delta. Information furnished by Delta is believed to be accurate and reliable. However, no responsibility is assumed by Delta for its use, nor for any infringements of patents or other rights of third parties, which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Delta. Delta reserves the right to revise these specifications at any time, without notice. DS_S24SE/S24DE 30W_07152020 E-mail: dcdc@deltaww.com http://www.deltaww.com/dcdc P15