103-1332-403

INCANDESCENT PANEL MOUNT INDICATORS 031 SERIES FOR 1" MOUNTING HOLE • FRICTION-FIT-CAP BASE PART NO. VOLTAGE FIG 031-3101-01-101 6–250 1 Uses: S-6 CANDELABRA SCREW BASE INCANDESCENT LAMP 1" - 27 NS THD No. 6–36 THD Fig. 1 61.98 [2.44] MAX CAP PART NO. 031-0111-300 031-0112-300 031-0113-300 031-0135-300 031-0137-300 COLOR RED GREEN AMBER WHITE CLEAR FIG 2 2 2 2 2 CAP PART NO. 031-0431-300 031-0432-300 031-0433-300 031-0435-300 031-0437-300 COLOR RED GREEN AMBER WHITE CLEAR FIG 3 3 3 3 3 Fig. 2 Fig. 3 28.58 [1.13] 28.58 [1.13] 7.94 [.31] 7.94 [.31] 19.81 [.78] MAX 19.81 [.78] MAX Material & Finish: Base - Nickel Plated Brass, Cap - Polycarbonate with Chrome Plated Brass Bezel 051 & 080 SERIES FOR 1" MOUNTING HOLE • WATERTIGHT BASE PART NO. VOLTAGE 080-0901-05-303 080-3101-05-303 080-4001-05-303 FIG 6–250 6–250 6–250 4 5 6 GASKET Fig. 4 GASKET Fig. 5 Uses: S-6 CANDELABRA SCREW BASE INCANDESCENT LAMP Fig. 6 GASKET 1" - 27 NS THD No. 6–32 THD No. 6–32 THD 2.38 [.09] (2 HOLES) 50.80 {2.00] MAX Fig. 7 CAP PART NO. 051-0111-303 051-0112-303 051-0113-303 051-0135-303 051-0137-303 051-0431-303 051-0432-303 051-0433-303 051-0435-303 051-0437-303 COLOR RED GREEN AMBER WHITE CLEAR RED GREEN AMBER WHITE CLEAR FIG 7 7 7 7 7 8 8 8 8 8 CAP PART NO. 080-0531-303 080-0532-303 080-0533-303 080-0535-303 080-0537-303 080-1231-303 080-1232-303 080-1233-303 080-1235-303 080-1237-303 COLOR RED GREEN AMBER WHITE CLEAR RED GREEN AMBER WHITE CLEAR FIG 9 9 9 9 9 10 10 10 10 10 Fig. 8 1" - 27 NS THD 28.95 [1.14] 1" - 27 NS THD 28.95 [1.14] 23.68 [.81] MAX 23.68 [.81] MAX Fig. 9 Fig. 10 1" - 27 NS THD 28.95 [1.14] 1" - 27 NS THD 28.95 [1.14] 23.81 [.94] MAX 20.68 [.81] MAX Material & Finish: Base - Chrome Plated Brass, Cap - Polycarbonate with Chrome Plated Brass Bezel 103 SERIES FOR 1" MOUNTING HOLE • OILTIGHT* BASE PART NO. VOLTAGE FIG 103-0901-05-103 103-3101-05-103 103-3502-05-103† 6–250 6-250 24–250 11 12 13 Fig. 11 "O" RINGS COLOR RED GREEN AMBER WHITE CLEAR RED GREEN FIG 14 14 14 14 14 15 15 CAP PART NO. 103-1233-403 103-1235-403 103-1237-403 103-1331-403 103-1332-403 103-1333-403 103-1335-403 103-1337-403 Fig. 13 "O" RINGS "O" RINGS 1" - 27 NS THD No. 6 32 THD 2 SCREWS † Takes S-6 Double Contact Bayonet Base Lamp CAP PART NO. 103-0531-403 103-0532-403 103-0533-403 103-0535-403 103-0537-403 103-1231-403 103-1232-403 Fig. 12 1" - 27 NS THD No. 6 32 THD 2 SCREWS No. 6 32 THD 2 SCREWS 50.80 {2.00] MAX COLOR AMBER WHITE CLEAR RED GREEN AMBER WHITE CLEAR FIG 15 15 15 16 16 16 16 16 Uses: S-6 CANDELABRA SCREW BASE INCANDESCENT LAMP 1" - 27 47.62 [1.86] MAX Fig. 14 30.56 (1.20) Fig. 15 1" - 27 NS THD 30.56 (1.20) 25.00 [.98] MAX NS THD 22.23 [.87] MAX Fig. 16 30.56 FACETED TRANSPARENT [1.20] Material & Finish: Base - Nickel Plated Brass, Cap - Polycarbonate with Chrome Plated Brass Bezel Neon and incandescent lamp information on Pages 35 and 36. * See Page 14 for Oiltight information Dimensions in mm [inches] 21 Dialight Corporation • 1501 State Route 34 • Farmingdale, NJ 07727 • TEL: (732) 919-3119 • FAX: (732) 751-5778 • www.dialight.com 1" - 27 NS THD 25.40 [1.00] MAX Dialight