135-3273-003

INCANDESCENT PANEL MOUNT INDICATORS 021 SERIES FOR 11/16" MOUNTING HOLE • LIGHT SHIELD BASE PART NO. VOLTAGE 021-0410-29-301 FIG 2–120 Fig. 1 1 CAP PART NO. COLOR FIG 021-2900-300 NO LENS 2 Uses: T-3 1/4 MINIATURE BAYONET BASE INCANDESCENT LAMP Fig. 2 11/16 - 27NS THD + CENTER CONTACT 17.86 [.70] 1.98 [.08] x 3.18 [.13] SLOTS 10.72 [.42] 12.7 [.50] 34.04 [1.34] MAX Material & Finish: Chrome Plated Brass 30.48 [1.20] 052, 081, 095, 135 SERIES FOR 11/16" MOUNTING HOLE • WATERTIGHT BASE PART NO. VOLTAGE FIG 081-0410-01-303 081-1059-01-303† 081-1310-01-303 2–120 2–120 2–120 3 4 5 Fig. 3 GASKET Fig. 4 GASKET 11/16 27NS THD COLOR RED GREEN AMBER WHITE CLEAR RED GREEN AMBER CLEAR WHITE CLEAR RED GREEN FIG 6 6 6 6 6 7 7 7 7 7 7 8 8 CAP PART NO. * 081-0433-303 081-0435-303 081-0437-303 095-3137-003 095-3171-003 095-3172-003 095-3173-003 095-3175-003 135-3237-003 135-3271-003 135-3272-003 135-3273-003 135-3275-003 Material & Finish: Base - Chrome Plated Brass, Cap - Polycarbonate with Chrome Plated Bezel on the 081 Series Fig. 7 and Fig. 8. ** Dialight recommends: transparent lens caps for Based LED; Clear lens caps for green Based LEDs Fig. 5 GASKET 1.98 [.08] x 3.30 [.125] SLOTS 45.97 [1.81] MAX No. 4–36 THD 33.34 [1.31] MAX + CENTER CONTACT † Part No. 081-1059-01-303 uses T2 Telephone Slide Base Lamp (PSB Type); CSA certified ** Dialight recommends: transparent lens caps for Based LED; Clear lens caps for green Based LEDs CAP PART NO. * 052-3191-003 052-3192-003 052-3193-003 052-3195-003 052-3197-003 081-0111-303 081-0112-303 081-0113-303 081-0117-303 081-0135-303 081-0137-303 081-0431-303 081-0432-303 + CENTER CONTACT COLOR AMBER WHITE CLEAR CLEAR RED GREEN AMBER WHITE CLEAR RED GREEN AMBER WHITE FIG 8 8 8 9 9 9 9 9 10 10 10 10 10 Uses: T-3 1/4 MINIATURE BAYONET BASE INCANDESCENT LAMP, CLUSTER BASED LED** OR MULTI-CHIP LED** Fig. 6 Fig. 7 4.76 [.18] 4.76 [.18] 15.86 [.63] 9/16 - 27 NS THD GASKET 15.86 [.63] MAX GASKET 17.46 [.68] MAX FLUTED TRANSPARENT Fig. 8 4.76 [.18] 4.76 [.18] 9/16 - 27 NS THD 16.27 [.64] Fig. 10 Fig. 9 4.76 [.18] 15.86 [.63] 9/16 - 27 NS THD 15.86 [.63] GASKET 15.86 [.63] MAX GASKET 17.46 [.68] MAX FACETED TRANSPARENT 9/16 - 27 NS THD 15.86 [.63] MAX GASKET *PART NUMBER ORDERING CODE 095 – 31xx – 003 135 – 32xx – 003 *PART NUMBER ORDERING CODE 081-0xxx-303 Series 9/16 - 27 NS THD 16.27 [.64] Series Lens Finish: 1 = Back Frosted (Not available in white) 3 = Transparent** Lens Finish: 3 = Transparent** 7 = Translucent (Not available in clear) 125 SERIES FOR 11/16" MOUNTING HOLE • OILTIGHT* BASE PART NO. VOLTAGE FIG 125-0410-11-103 125-1310-11-103 2–120 2–120 11 12 Fig. 11 "O" RING Fig. 12 + CENTER CONTACT 11/16 "O" RING 27NS THD + CENTER CONTACT 1.98 [.08] x 3.30 [.125] SLOTS Uses: T-3 1/4 MINIATURE BAYONET BASE INCANDESCENT LAMP, CLUSTER BASED LED**, OR MULTI-CHIP LED** No. 4–36 THD 31.24 [1.23] MAX CAP PART NO. 125-1131-403 125-1132-403 125-1133-403 125-1135-403 125-1137-403 COLOR RED GREEN AMBER WHITE CLEAR FIG 13 13 13 13 13 CAP PART NO. 125-1191-403 125-1192-403 125-1193-403 125-1195-403 125-1197-403 COLOR RED GREEN AMBER WHITE CLEAR Material & Finish: Base - Nickel Plated Brass Cap - Polycarbonate with Chrome Plated Brass Bezel FIG 14 14 14 14 14 Fig. 13 Fig. 14 FLUTED TRANSPARENT 21.03 [.83] 5/8 - 27 NS THD 21.03 [.83] 22.22 [.86] MAX 22.22 [.86] MAX *PART NUMBER ORDERING CODE 125 – 11xx – 403 * See Page 14 for Oiltight information Series Neon and incandescent lamp information on Pages 35 and 36. Based LED lamp information on Pages 37 through 40. ** Dialight recommends: transparent lens caps for Based LED; Clear lens caps for green Based LEDs Dimensions in mm [inches] 5/8 - 27 NS THD 20 Dialight Corporation • 1501 State Route 34 • Farmingdale, NJ 07727 • TEL: (732) 919-3119 • FAX: (732) 751-5778 • www.dialight.com Lens Finish: 1 = Back Frosted (Not available in white) 3 = Transparent** Dialight