249-7866-1431-514

NEON PANEL MOUNT INDICATORS 249 SERIES FOR 3/8" MOUNTING HOLE Fig. 1 Fig. 2 SERIES PART NUMBER* 249-7841-1431-574 249-7841-1433-574 249-7841-1437-574 249-7866-1431-514 249-7866-1433-514 249-7866-1437-514 COLOR VOLTAGE mA OHMS FIG RED AMBER CLEAR RED AMBER CLEAR 105–125 AC-DC 105–125 AC-DC 105–125 AC-DC 110–125 AC-DC 110–125 AC-DC 110–125 AC-DC 0.7 0.7 0.7 1.9 1.9 1.9 100K 100K 100K 22K 22K 22K 7.11 [.28] 7.11 [.28] 1 1 1 1 1 1 4.76 [.19] 37.34 [1.47] MAX 4.76 [.19] 4.06 [.16] 4.76 [.19] 32.54 [1.28] MAX 9.92 [.39] *PART NUMBER ORDERING CODE 249 – 7841 – xx3x – 574 249 – 7866 – xx3x – 514 Series Material & Finish: Housing - Black Anodized Aluminum. Cap - High Impact Plastic Lens Shape: 14 – Fig 1 = Cylindrical 09 – Fig 2 = Stovepipe 507 SERIES CARTRIDGES FOR HOLDERS & CLIPS • 25,000 LIFE HOURS SERIES PART NUMBER* 507-4537-1431-640 507-4537-1433-640 507-4537-1435-640 507-4537-1437-640 507-4538-1431-630 507-4538-1433-630 507-4538-1435-630 507-4538-1437-630 COLOR VOLTAGE mA OHMS RED AMBER WHITE CLEAR RED AMBER WHITE CLEAR 105–125 AC-DC 105–125 AC-DC 105–125 AC-DC 105–125 AC-DC 110–125 AC-DC 110–125 AC-DC 110–125 AC-DC 110–125 AC-DC 0.3 0.3 0.3 0.3 1.2 1.2 1.2 1.2 100K 100K 100K 100K 47K 47K 47K 47K Fig. 3 FIG 3 3 3 3 3 3 3 3 Fig. 4 7.11 [.28] 7.11 [.28] 6.73 [.27] 5.17 [.20] 11.51 [.45] 32.13 [1.27] MAX 5.17 [.20] 36.91 [1.45] MAX *PART NUMBER ORDERING CODE 507 – 4537 – xx3x – 640 507 – 4538 – xx3x – 630 Series Material & Finish: Housing - Clear Anodized Aluminum. Cap - High Impact Plastic Lens Shape: 14 – Fig 3 = Cylindrical 09 – Fig 4 = Stovepipe 250 & 508 SERIES HOLDERS FOR 3/8" MOUNTING HOLE HOLDER WITHOUT COLLAR* HOLDER WITH COLLAR* COLLAR FLANGE NUT 13.1 [.515] FLANGE 3/8 - 32 NF THD 7.90 [.310] 5.00 [.197] 7.10 [.280] 15.90 [.625] RED AMBER WHITE CLEAR Terminal Type: 87 = Turret Terminals 74 = Solder Blade (Not Shown) 75 = Solder Cups (Not Shown) 508-8745-504 250-8745-14-504 250-3531-500 250-3533-500 250-3535-500 250-3537-500 Series 5.00 [.197] 15.90 [.625] 35.72 [1.406] MAX 32.54 [1.28] MAX 250 Series Caps for use with 507 cylindrical cartridges. (Fig. 3) CAP PART NO. COLOR *PART NUMBER ORDERING CODE 250 – xx45 – 14 – 504 508 – xx45 – 504 3/8 - 32 NF THD Fig. 5 FIG 5 5 5 5 250 Series Caps for use with 507 stovepipe cartridges. (Fig. 4) CAP PART NO. COLOR 250-1631-500 250-1633-500 250-1635-500 250-1637-500 13.10 [.52] 12.25 [.50] MAX RED AMBER WHITE CLEAR Fig. 6 FIG 6 6 6 6 13.10 [.52] 18.26 [.72] MAX] Material & Finish: Holders – Black Anodized Aluminum, Cap – Polycarbonate Fig. 5, High Impact Plastic Fig. 6, Cartridge – Clear Anodized Aluminum 515 SERIES CONNECTORS & SPEED CLIPS FOR 9/32" MOUNTING HOLE CARTRIDGE WITH SPEED CLIP & CONNECTOR 1.59 [.06] PANEL 30.02 [1.19] 15.88 [.625] CONNECTOR 515-0012 CONNECTOR 515-0074 13.89 [.547] MAX 15.88 [.625] MAX 4.76 [.188] SPEED CLIP 515-0051 9.14 [.360] 6.86 [.270] 7.49 [.295] Green and Blue Lens Caps Not Available for Neon Indicators Dimensions in mm [inches] 15 Dialight Corporation • 1501 State Route 34 • Farmingdale, NJ 07727 • TEL: (732) 919-3119 • FAX: (732) 751-5778 • www.dialight.com Dialight