3TD-9869

3mm, Flat Top LED CBI® Circuit Board Indicator In-line, 3 Leaded Bi-Color 4.83 [.190] 3.80 [.150] 9.65 [.380] 551-3508 PART NO. 551-3508 COLOR Red/Green 7.11 [.280] 3.81 [.150] 3.09 [.122] 1.78 [.070] 2.54 [.100] .608 [.020] 1.70 [.067] 1.60 [.063] 2.54 1.90 1.90 [.100] [.075] [.075] STABILIZER PIN 2.03 [.080] 2.54 [.100] 1.90 1.90 [.075] [.075] GREEN ANODE COMMON CATHODE RECOMMENDED P.C. BOARD LAYOUT 1.09 [.043] Dimensions in mm [inches] Features • Common Cathode simplifies design, and provides amber as a third color • Locating pin provides stability during soldering • Multiple CBIs form horizontal LED arrays on 4.2mm (0.1650”) center-lines • High Contrast, UL 94 V-0 rated, black housing • • • • • Oxygen index: 31.5% Polymer content: PBT, 1.055 g Housing stand-offs facilitate PCB cleaning Solderability per MIL-STD-202F, method 208F LEDs are safe for direct viewing per IEC 825-1, EN-60825-1 4 Tolerance note: As noted, otherwise: • LED Protrusion: ±0.04 mm [±0.016] • CBI Housing: ±0.02mm[±0.008] Typical Operating Characteristics (TA=25°C) Part Number 551-3508 Color Red/Green Peak Wavelength nm 630/560 IV mcd 4/4 See LED data sheet for additional information See page 4-70 and 4-71 for Reference Only LED Drive Circuit Examples. See page 4-72 for Pin Out VF Volts 2/2.1 Test Current (mA) 20 LED Data sheet 3TF-9484 Page # 4-69 Dialight Corporation • 1501 Route 34 South • Farmingdale, NJ 07727 • TEL: (732) 919-3119 • FAX: (732) 751-5778 •www.dialight.com 4-21 3mm LED Bi-Color Non-Tinted, Diffused 3TD-9664, 3TD-986x, 3TF-9484 TYPE *3TD-9664 *3TD-9868 *3TD-9869 *3TF-9484 COLOR Red/Green Red/Green Yellow/Green Red/Green * NOT A VALID PART NUMBER. THIS SHEET IS FOR REFERENCE ONLY. Red/Green Red/Green Yellow/Green Red/Green ABSOLUTE MAXIMUM RATINGS (TA=25°C) Power Dissipation (mW) Forward Current (mA) Derating (mW/°C) From 25°C *Derating (mA/ °C) From 50°C Peak Current (mA) Pulse width 10µs -9664 75/75 .85/.85 100/100 -30/+85 -30/+100 -9868 100/100 30/30 .4*/.4* 30/30 -55/+100 -55/+100 -9869 60/100 20/30 .25*/.4* 80/120 -55/+100 -55/+100 -9484 75/75 30/30 .33*/.67* 100/100 -30/+85 -30/+100 4 Operating Temperature (°C) Storage Temperature (°C) Soldering Temperature 260°C, 6 seconds, 1.6 mm from case (9484 only) 260°C, 5 seconds, 1.6 mm from case (except 9484) Solder Adherence per MIL-STD-202E, Method 208C Red/Green Red/Green Yellow/Green Red/Green OPERATING CHARACTERISTICS (TA=25°C) Luminous Intensity (mcd) IF=20mA *IF=10mA Peak Wavelength (nm) λ Peak Viewing Angle (2Θ½) Forward Voltage (V) IF=20mA Reverse Voltage (V) IR=100µA Min. Typical Typical Typical Typical Max. -9664 4/6 8/12 630/560 80° 2/2.1 2.5/2.5 -9868 2.5*/3.7* 4.7*/10* 635/565 60°/60° 2/2.1 2.8/2.8 -9869 2.5*/2.5* 4.3*/6.3* 585/565 80°/80° 2.1/2.1 2.8/2.8 -9484 2/2 4/4 630/560 2/2.1 2.5/2.5 Min. 5 5 5 5 Θ  is the off axis angle at which the luminous intensity is half the axial luminous intensity Dialight Corporation • 1501 Route 34 South • Farmingdale, NJ 07727 • TEL: (732) 919-3119 • FAX: (732) 751-5778 •www.dialight.com 4-69