507-3913-1475-600

INCANDESCENT PANEL MOUNT INDICATORS 507 SERIES CARTRIDGES FOR USE WITH HOLDERS & CLIPS PART NO.* COLOR VF 507-3911-1431-600 RED 10 507-3911-1432-600 GREEN 10 507-3911-1433-600 AMBER 10 507-3911-1435-600 WHITE 10 507-3914-1471-600 RED 14 507-3914-1472-600 GREEN 14 507-3914-1473-600 AMBER 14 507-3914-1475-600 WHITE 14 507-3917-1471-600 RED 28 507-3917-1472-600 GREEN 28 507-3917-1473-600 AMBER 28 507-3917-1475-600 WHITE 28 507-3918-1437-600 CLEAR 28 507-3918-1471-600 RED 28 507-3918-1472-600 GREEN 28 507-3918-1473-600 AMBER 28 507-3918-1475-600 WHITE 28 507-5820-0747-600† CLEAR 12 507-5821-0747-600† CLEAR 28 507-5822-0747-600† CLEAR 48 507-5824-0747-600† CLEAR 120 † Use Holder 250-8758-33-504 and 250 Series Cap Fig. 1 mA CP LIFE HOURS FIG 40 40 40 40 80 80 80 80 40 40 40 40 40 40 40 40 40 170 40 53 25 0.08 0.08 0.08 0.08 0.30 0.30 0.30 0.30 0.34 0.34 0.34 0.34 0.30 0.30 0.30 0.30 0.30 2.10 1.20 1.50 1.50 10,000 10,000 10,000 10,000 15,000 15,000 15,000 15,000 4,000 4,000 4,000 4,000 7,000 7,000 7,000 7,000 7,000 5,000 5,000 5,000 5,000 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 3 3 3 3 28.96 [1.140] MAX 8.38 [.330] 6.73 [.265] 5.16 [.203] 7.14 [.280] .51 [.020] Fig. 2 33.73 [1.33] MAX 8.38 [.330] 11.51 [.45] 5.16 [.203] 7.14 [.280] Fig. 3 37.30 [1.47] MAX 8.38 [.330] 2.74 [.11] 5.16 [.203] 7.14 [.280] *PART NUMBER ORDERING CODE 507 – 39xx – xxxx – 600 Series Lens Shape: 14 – Fig 1 = Cylindrical 09 – Fig 2 = Stovepipe 250 & 508 SERIES HOLDERS FOR 3/8" MOUNTING HOLE HOLDER WITHOUT COLLAR* HOLDER WITH COLLAR * FLANGE NUT COLLAR 13.1 [.515] 3/8 - 32 NEF THD 7.90 [.310] HOLDER WITHOUT COLLAR† FLANGE NUT 3/8 - 32 NEF THD FLANGE NUT 3/8 - 32 NEF THD 5.00 [.197] 7.10 [.280] 15.90 [.625] 5.00 [.197] 5.00 [.197] 15.90 [.625] 43.26 [1.703] MAX 30.96 [1.22] MAX 33.34 [1.31] MAX 250-8738-14-504 508-8738-504 250 Series Caps for use with 507 cartridges. CAP PART NO. COLOR FIG 250-3531-500 250-3532-500 250-3533-500 250-3535-500 250-3537-500 RED GREEN AMBER WHITE CLEAR 4 4 4 4 4 250-8758-33-504 for Figure 3 Only *PART NUMBER ORDERING CODE 250 – xx38 – 14 – 504 508 – xx38 – 504 Fig. 4 13.10 [.52] Series 12.25 [.50] MAX Terminal Type: 87 = Turret Terminals 74 = Solder Blade (Not Shown) 75 = Solder Cups (Not Shown) Material & Finish: Holder – Black Anodized Aluminum, Cap – Polycarbonate, Cartridge Clear Anodized Aluminum 515 SERIES CONNECTORS & SPEED CLIPS FOR 9/32" MOUNTING HOLE CARTRIDGE WITH SPEED CLIP & CONNECTOR 1.59 [.06] PANEL 30.02 [1.19] 15.88 [.625] CONNECTOR 515-0012 15.88 [.625] CONNECTOR 515-0074 13.89 [.547] 4.76 [.188] SPEED CLIP 515-0051 9.14 [.360] 6.86 [.270] 7.49 [.295] Dimensions in mm [inches] 18 Dialight Corporation • 1501 State Route 34 • Farmingdale, NJ 07727 • TEL: (732) 919-3119 • FAX: (732) 751-5778 • www.dialight.com Dialight