507-4757-3331-500F.

LED PANEL MOUNT INDICATORS 507 SERIES CARTRIDGES FOR USE WITH HOLDERS & CLIPS PART NO.* COLOR VF 507-4762-3331-500 507-4862-3332-500 507-4962-3333-500 507-5062-3334-500 507-4757-3331-500 507-4857-3332-500 507-4957-3333-500 507-5064-3334-500 507-4759-3331-500 507-4859-3332-500 507-4959-3333-500 507-5066-3334-500 507-4760-3331-500 507-4860-3332-500 507-4960-3333-500 507-5067-3334-500 507-4761-3331-500 507-4861-3332-500 507-4961-3333-500 507-5068-3334-500 Red Green Yellow Blue Red Green Yellow Blue Red Green Yellow Blue Red Green Yellow Blue Red Green Yellow Blue 2 2.1 2.1 3 5 5 5 5 10 10 10 10 14 14 14 14 28 28 28 28 mA mcd† FIG. 20 20 20 10 15 20 20 10 15 20 20 10 20 20 20 10 15 20 20 10 30 40 45 100 10 50 35 100 10 50 35 100 10 50 35 100 10 50 35 100 FIG. 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 28.96 [1.140] 8.38 [.330] 6.73 [.265] 5.16 [.203] 7.14 [.280] FIG. 4 28.96 [1.140] 6.73 [.265] 5.16 [.203] + .51 [.020] Polarity: To facilitate proper installation of the cartridge, the cartridge is marked on the cartridge housing and the terminal base is keyed. *PART NUMBER ORDERING CODE 507 – xxxx – xx3x – 500 Series Lens Shape: 33 – Fig 3 = Cylindrical 37 – Fig 4 = Stovepipe † mcd intensity of LED * Blue mcd rating with cylindrical cap is 100 mcd; stovepipe cap is 275 mcd 250 & 508 SERIES HOLDERS FOR 3/8" MOUNTING HOLE HOLDER WITHOUT COLLAR* 13.1 [.515] HOLDER WITH COLLAR* COLLAR FLANGE NUT FLANGE NUT *PART NUMBER ORDERING CODE 250 – xx38 – 14 – 504 508 – xx38 – 504 7.90 [.310] 5.00 [.197] 15.90 [.625] 29.70 [1.170] 7.10 [.280] 15.90 [.625] 29.70 [1.170] Series 5.00 [.197] Terminal Type: 87 = Turret Terminals 74 = Solder Blade (Not Shown) 75 = Solder Cups (Not Shown) 508-8738-504 Material & Finish: Housing, Cartridge and Holder - Black Anodized Aluminum. Cap -High Impact Plastic Terminals of holders marked A and B. A = Positive 515 SERIES CONNECTORS & SPEED CLIPS FOR 9/32" MOUNTING HOLE CARTRIDGE WITH SPEED CLIP & CONNECTOR 1.59 [.06] PANEL 30.02 [1.19] CONNECTOR 515-0012 15.88 [.625] 15.88 [.625] CONNECTOR 515-0074 13.89 [.547] 4.76 [.188] SPEED CLIP 515-0051 9.14 [.360] 6.86 [.270] 7.49 [.295] † mcd intensity of LED Material & Finish: Housing, Cartridge and Holder - Black Anodized Aluminum. Cap -High Impact Plastic Dimensions in mm [inches] 12 Dialight Corporation • 1501 State Route 34 • Farmingdale, NJ 07727 • TEL: (732) 919-3119 • FAX: (732) 751-5778 • www.dialight.com Dialight