515-1000F

3 x 5.5mm Rectangular ® OptopipeTM Optical Light Pipe, 3 Array 515-1000 26.82 [1.056] 21.34 [.840] 18.26 [.719] 6.81 [.268] 5.49 [.216] DIFFUSED FRONT SURFACES 3.00 [.118] 3.18 [.125] 10.16 [.400] 12.17 [.479] 3.94 [.155] 16.31 [.642] 8.08 [.318] 6.86 [.270] 2.94 [.116] TYP; 2 PLACES 10.67 [.420] 10.67 [.420] NOTE: designed for post-reflow PC board insertion. 5.33 [.210] 1.65 [.065] 1.27 [.050] DIRECTION OF LIGHT Ø [.113 ± .002] 1.14 [.045] 2.41 [.095] RECOMMENDED SOLDER PAD/HOLES LAYOUT Dimensions in mm [inches] Features Recommended MicroLED SMT LEDs for use with 515-1000 PART NO. COLOR PAGE # 597-3001-2xx 597-3111-5xx 597-3121-2xx 597-3211-2xx 597-3211-5xx 597-3301-2xx 597-3301-5xx 597-3401-2xx 597-3401-5xx 597-7701-2xx 597-7701-5xx 597-7721-2xx 597-7721-5xx 597-7731-2xx Red AlGaAs Red AlGaAs Red Orange Orange Green Green Yellow Yellow Red/Green Red/Green Yellow/Green Yellow/Green Red/Yellow 1-21 1-30 1-21 1-21 1-30 1-21 1-30 1-21 1-30 1-23 1-31 1-23 1-31 1-24 • High transmissivity polycarbonate material • UL94V-0 compliance • ESD protection (circuit isolation from front panel) • Wide viewing angle • Arrays reduce insertion costs LED Data • Designed to replace rectangular right angle through-hole device For absolute maximum ratings and other electrical and optical data on the recommended LEDs, refer to LED data sheets. • Compatible with Dialight’s 515-1001 single position Optopipe Light Pipe • Secures to PCB by press fit Operating/Storage Temperature –30°C to +100°C Dialight Optopipe Light Pipe Description This Optopipe™ is reliably held in place by 2 locating pins located between the light pipe elements. This Optopipe™ functions as a through-the-case indicator, and has a textured finish on the light emitting surface that increases its viewing angle. The recommended light sources are Dialight's 597 Series PLCC-2 or PLCC-4 Type SMT LEDs. The SMT LEDs are mounted in a straight line on a 0.420" pitch. The light pipe material is water clear transmissive polycarbonate rated UL94-V0, and has a 35% oxygen index. Dialight can provide custom Optopipe™ solutions for your applications. 2-58 Dialight Corporation • 1501 Route 34 South • Farmingdale, NJ 07727 • TEL: (732) 919-3119 • FAX: (732) 751-5778 •www.dialight.com