515-1010F

5mm Round ® OptopipeTM Optical Light Pipe, 3 Array DIFFUSED 2.41 FRONT [.095] SURFACES 4.83 Ø [.190] 14.6 [.575] 8.76 [.345] 12.7 [.500] 6.3 [.250] 515-1010 12.7 [.500] 4.83 [.190] 6.35 [.250] 3.94 [.155] 2.84 [.112] NOTE: C. L. of LED 2.95 [.116] TYP; (2) PLACES 6.35 [.250] 6.35 [.250] 11.30 [.445] 4.14 [.163] NOTE: designed for post-reflow PC board insertion. 5.16 [.203] 5.16 [.203] 1.65 [.065] 1.14 [.045] DIRECTION OF LIGHT 12.7 [.500] 2.41 [.095] 17.86 [.703] PIN MOUNTING HOLE Ø [.113 ± .002] RECOMMENDED SOLDER PAD/HOLES LAYOUT Dimensions in mm [inches] Features Recommended MicroLED SMT LEDs for use with 515-1010 PART NO. COLOR PAGE # 597-3001-2xx 597-3111-5xx 597-3121-2xx 597-3211-2xx 597-3211-5xx 597-3301-2xx 597-3301-5xx 597-3401-2xx 597-3401-5xx 597-7701-2xx 597-7701-5xx 597-7721-2xx 597-7721-5xx 597-7731-2xx Red AlGaAs Red AlGaAs Red Orange Orange Green Green Yellow Yellow Red/Green Red/Green Yellow/Green Yellow/Green Red/Yellow 1-21 1-30 1-21 1-21 1-30 1-21 1-30 1-21 1-30 1-23 1-31 1-23 1-31 1-24 • High transmissivity polycarbonate material • UL94V-0 compliance • ESD protection (circuit isolation from front panel) • Wide viewing angle LED Data • Arrays reduce insertion costs For absolute maximum ratings and other electrical and optical data on the recommended LEDs, refer to LED data sheets. • Designed to replace 5mm right angle through-hole device • Compatible with Dialight’s 515-1011 single position Optopipe Light Pipe • Secures to PCB by press-fit Operating/Storage Temperature –30°C to +100°C Dialight Optopipe Light Pipe Description This light pipe’s larger light emitting surfaces appear bright and are optically well isolated. It is reliably held in place by 2 press-fit pins located between the light pipe elements. This Optopipe™ functions as a through-the-case indicator with a textured finish on the 3 light emitting surfaces that increases its viewing angle. The recommended light sources are Dialight's 597 Series PLCC-2 or PLCC-4 Type SMT LEDs. The LEDs are mounted in a straight line on a 0.500" pitch. The light pipe material is water clear transmissive polycarbonate rated UL94-V0, and has a 35% oxygen index. Dialight can provide custom Optopipe™ solutions for your applications. 2-46 Dialight Corporation • 1501 Route 34 South • Farmingdale, NJ 07727 • TEL: (732) 919-3119 • FAX: (732) 751-5778 •www.dialight.com