515-1031F

NEW 3.2mm Round ® OptopipeTM Optical Light Pipe, 3 Array, Panel Mounted 2.00 [.08] TYP 31.20 [1.23] REF Ø 2.80 [.110] (2) PLACES Ø 3.20 [.126] (3) PLACES 9.45 [.372] Recommended MicroLED SMT LEDs for use with 515-1031 6.05 [.238] DIRECTION OF LIGHT 13.97 [.550] DIFFUSED FRONT SURFACE 6.99 [.275] 2.50 [.098] FRONT PANEL 5.0 [.20] .51 [.020] MAX 2.90 [.11] TOP SURFACE OF LED C. L. LED 13.97 [.550] 13.97 [.550] 515-1031 2.54 [.100] PART NO. PAGE # 597-3xxx-4xx 597-3xx1-2xx 597-3xx1-4xx 597-3xx1-5xx 597-5x11-4xx 597-5x12-4xx 597-5004-4xx 597-5202-4xx 597-52x3-4xx 597-77x1-2xx 597-77x1-5xx 1-27 & 1-28 1-21 1-28 1-30 1-27 1-26 1-26 1-27 1-26 1-23 & 1-24 1-31 Dimensions in mm [inches] Features • • • • • • High transmissivity polycarbonate material UL94V-0 compliance ESD protection (circuit isolation from front panel) Wide viewing angle Arrays reduce insertion costs Secures to panel by heat staking LED Data For absolute maximum ratings and other electrical and optical data on the recommended LEDs, refer to LED data sheets. Operating/Storage Temperature –30°C to +100°C Dialight Optopipe Light Pipe Description This Optopipe™ functions as a 3mm array. It is held to the panel by 2 heat stakable pins. Although a wide variety of LED light sources can be used, the recommended light sources are Dialight's 597 Series PLCC-2, PLCC-4, 1206, 1210, 0805, or 0603 Type SMT LEDs. The SMT LEDs are mounted in a straight line under the rear of the part on a 0.550" pitch. The light pipe material is water clear transmissive polycarbonate rated UL94-V0, and has a 35% oxygen index. Dialight can provide custom Optopipe™ solutions for your applications. 2-14 Dialight Corporation • 1501 Route 34 South • Farmingdale, NJ 07727 • TEL: (732) 919-3119 • FAX: (732) 751-5778 •www.dialight.com