521-9499

2mm x 5mm Rectangular LED CBI® Circuit Board Indicator 7.62 [.300] 5.46 [.215] 12.58 [.495] 2.41 [.095] 566-xx07 COLOR Green Yellow Red Red/Green FIG. A A A B 7.62 [.300] 5.08 [.200] D 6.73 [.265] PART NO. 566-0207 566-0307 566-0407 BI-COLOR 3.18 [.125] CATHODE 2.54 [.100] 4.32 [.170] 7.11 [.280] 2.54 [.100] 3.18 [.125] 566-3507 ANODE .97 [.038] RECOMMENDED PC BOARD HOLE PATTERN 2.54 [.100] 7.62 [.300] 2.54 [.100] 2.54 [.100] 1.52 [.060] Dimensions in mm [inches] FIGURE A Features 7.62 [.300] 5.46 [.215] 12.58 [.495] 2.41 [.095] 7.62 [.300] 5.08 [.200] • Multiple CBIs form horizontal LED arrays on 10.16mm (0.400”) center-lines. • Available common cathode (3 leaded) multi-color option 6.73 [.265] D 1 2 3 4.32 [.170] .126 [.050] 2.54 [.100] 7.11 [.280] 2.54 2.54 [.100] [.100] 3.18 [.125] 3.18 [.125] simplifies circuit designs • High Contrast, UL 94 V-0 rated, black housing • Oxygen index: 32% • • • • Polymer content: PBT, 0.532 g Housing stand-offs facilitate PCB cleaning Solderability per MIL-STD-202F, method 208F LEDs are safe for direct viewing per IEC 825-1, EN-60825-1 CATHODE 1. GREEN ANODE 2. COMMON CATHODE 3. RED ANODE .97 [.038] RECOMMENDED PC BOARD HOLE PATTERN 2.54 [.100] 2.54 [.100] 1.52 [.060] 1.26 [.050] 2.54 [.100] 7.62 [.300] Tolerance note: As noted, otherwise: FIGURE B • LED Protrusion: ±0.04 mm [±0.016] Dimensions in mm [inches] • CBI Housing: ±0.02mm[±0.008] Typical Operating Characteristics (TA=25°C) Peak Wavelength nm 565 583 635 635/565 IV mcd 4 3.5 7.4 3.5*/4* See LED data sheet for additional information See Page 5-20 and 5-21 for Reference Only LED Drive Circuit Example See Page 5-22 for Pin Out Part Number 566-0207 566-0307 566-0407 566-3507 * IF = 20mA Color Green Yellow Red Red/Green VF Volts 2.2 2.1 2 1.9/2.1 Test Current (mA) 20 20 20 10 Viewing Angle 2 Θ½ 110° 110° 140° 100° LED Data sheet 521-9332 521-9452 521-9499 521-9406 Page # 5-16 5-16 5-16 5-17 5-8 Dialight Corporation • 1501 Route 34 South • Farmingdale, NJ 07727 • TEL: (732) 919-3119 • FAX: (732) 751-5778 •www.dialight.com 2mm x 5mm Discrete LED Rectangular Tinted, Diffused 521-9332, 2.11 [.083] 7.70 [.303] 1.00 [.040] -9452, -9499, -9718 COLOR Green Yellow Red Blue DRAWING A A B B PART NO. 2.54 [.100] 4.82 [.190] CATHODE 25.4 [1.00] .51 [.020] 2.00 [.079] 521-9332 521-9452 521-9499 521-9718 DRAWING A DIM. L 1.00 [.040] 2.54 [.100] CATHODE .51 [.020] DIM. L Red 7.50 [.295] Blue 7.00 [.275] 5.00 [.197] 25.4 [1.00] DRAWING B Dimensions in mm [inches] Green Yellow Red Blue ABSOLUTE MAXIMUM RATINGS (TA=25°C) Power Dissipation (mW) Forward Current (mA) Derating (mA/°C) From 50°C 1. mW/°C From 25°C Peak Current (mA) Pulse width = 1 ms *Pulse width = 10 µs -9332 135 30 .5 500* -20/+100 -55/+100 -9452 85 20 .34 500* -55/+100 -55/+100 -9499 100 30 .4 120 -55/+100 -55/+100 -9718 189 30 .451 180 -25/+75 -25/+100 Operating Temperature (°C) Storage Temperature (°C) Soldering Temperature Solder Adherence per MIL-STD-202E, Method 208C 260°C, 5 seconds, 1.6 mm from case Green Yellow Red Blue OPERATING CHARACTERISTICS (TA=25°C) Luminous Intensity (mcd) IF=20mA Peak Wavelength (nm) λ Peak Viewing Angle (2Θ ½) Forward Voltage (V) IF=20mA Reverse Voltage (V), IR=100µA Min. Typical Typical Typical Typical Max. Min. -9332 2.6 4 565 110° 2.2 3 5 -9452 2.2 3.5 583 110° 2.1 2.6 5 -9499 3 7.4 635 140° 2 2.8 5 -9718 9 18 430 120° 5.3 6 5 Θ  is the off axis angle at which the luminous intensity is half the axial luminous intensity 5-16 Dialight Corporation • 1501 Route 34 South • Farmingdale, NJ 07727 • TEL: (732) 919-3119 • FAX: (732) 751-5778 •www.dialight.com 2mm x 5mm Discrete LED Bi-Color LED, Common Cathode Non-Tinted, Diffused PART NO. .29 [.315] .196 [.215] 2.11 [.083] 521-9406 COLOR Red/Green 521-9406 2.54 [.100] GREEN ANODE .194 [.204] COMMON CATHODE RED ANODE 1.00 [.040] 1.27 [.050] 25.4 [1.00] MIN LEADS .020 SQ. TYPICAL .508 [.020] Dimensions in mm [inches] Red/Green ABSOLUTE MAXIMUM RATINGS (TA=25°C) Power Dissipation (mW) Derating (mW/°C) From 25°C Forward Current (mA) Peak Current (mA) Pulse width = 10 µs Operating Temperature (°C) Storage Temperature (°C) Soldering Temperature Solder Adherence per MIL-STD-202E, Method 208C -9406 135/135 1.8/1.8 25/25 90/90 -20/+85 -55/+100 260°C, 5 seconds, 1.6 mm from case 5 Red/Green OPERATING CHARACTERISTICS (TA=25°C) Luminous Intensity (mcd) IF=20mA Peak Wavelength (nm) λ Peak Viewing Angle (2Θ ½) Forward Voltage (V) IF=10mA Min. Typical Typical Typical Typical Max. -9406 2.1/2.6 3.5/4 635/565 100° 1.9/2.1 2.4/2.7 Θ  is the off axis angle at which the luminous intensity is half the axial luminous intensity Dialight Corporation • 1501 Route 34 South • Farmingdale, NJ 07727 • TEL: (732) 919-3119 • FAX: (732) 751-5778 •www.dialight.com 5-17