550-6307F

4mm Flat Top LED CBI® Circuit Board Indicator Sloped Back Housing 6.22 [.245] PART NO. 550-6207 550-6307 550-6407 9.02 [.355] CATHODE I.D. 5.28 [.208] 4.10 [.162] DIA. 6.22 [.245] 550-6x07 COLOR Green Yellow Red 3.00 [.118] 3.68 [.145] .560 [.022] .508 [.020] SQ. 2.54 [.100] 1.09 [.043] 5.2 [.205] CATHODE RECOMMENDED P.C. BOARD LAYOUT 2.54 [.100] Dimensions in mm [inches] Features • Multiple CBIs form horizontal LED arrays on 6.35mm (0.250”) center-lines. • Flat LED provides flush panel appearance and wide viewing angle • High Contrast, UL 94 V-0 rated, black housing • Oxygen index: 32% • Polymer content: PBT, 0.596 g 5 • Housing stand-offs facilitate PCB cleaning • Solderability per MIL-STD-202F, method 208F • LEDs are safe for direct viewing per IEC 825-1, EN-60825-1 • Compatible with 552-60xx-200 Tolerance note: As noted, otherwise: • LED Protrusion: ±0.04 mm [±0.016] • CBI Housing: ±0.02mm[±0.008] Typical Operating Characteristics (TA=25°C) See LED data sheet for additional information See Page 5-20 and 5-21 for Reference Only LED Drive Circuit Example See Page 5-22 for Pin Out Part Number Color Peak Wavelength nm IV mcd VF Volts Test Current (mA) Viewing Angle 2Θ Θ½ LED Data sheet Page # 550-6207 550-6307 550-6407 Green Yellow Red 565 585 630 12.6 8.7 8.7 2.1 2.1 2 20 20 20 150° 150° 145° 521-9708 521-9707 521-9706 5-19 5-19 5-19 Dialight Corporation • 1501 Route 34 South • Farmingdale, NJ 07727 • TEL: (732) 919-3119 • FAX: (732) 751-5778 •www.dialight.com 5-5 4mm Discrete LED Flat Top Tinted, Diffused 521-970x PART NO. 521-9706 521-9707 521-9708 2.54 [.100] 5.99 [.236] 1.27 [.050] CATHODE COLOR Red Yellow Green 2.54 [.100] 3.99 [.157] 1.00 [.040] .508 [.020] 26.42 [1.04] min Dimensions in mm [inches] Red Yellow Green -9706 -9707 -9708 Power Dssipation (mW) Derating (mA/°C) From 50°C 100 .4 60 .25 100 .4 Forward Current (mA) 30 20 30 Peak Current (mA) 120 80 120 Operating Temperature (°C) -55/+100 -55/+100 -55/+100 Storage Temperature (°C) -55/+100 -55/+100 -55/+100 ABSOLUTE MAXIMUM RATINGS (TA=25°C) Pulse width = 100µs Soldering Temperature 260°C, 5 seconds, 1.6 mm from case Solder Adherence per MIL-STD-202E, Method 208C OPERATING CHARACTERISTICS (TA=25°C) Red Yellow Green -9706 -9707 -9708 Luminous Intensity (mcd) IF=20mA Min. Typical 2.5 8.7 5.6 8.7 8.7 12.6 Peak Wavelength (nm) λ Peak Typical 630 585 565 Viewing Angle (2Θ ½) Typical 145° 150° 150° Forward Voltage (V) IF=20mA Typical Max. 2 2.8 2.1 2.8 2.1 2.8 Reverse Voltage (V), IR=100µA Min. 5 5 5 Θ  is the off axis angle at which the luminous intensity is half the axial luminous intensity Dialight Corporation • 1501 Route 34 South • Farmingdale, NJ 07727 • TEL: (732) 919-3119 • FAX: (732) 751-5778 •www.dialight.com 5-19 5