551-0501F

3mm LED CBI® Circuit Board Indicator (DIN 41494 Compatible) 551-xx01 PART NO. 3.35 [.132]* 5.00 [.197] 10.00 [.394] 10.00 [.394] HIGH EFFICIENCY 551-0201 551-0301 551-0401 551-0801 551-2501 2.92 [.115] 5.00 [.197] D 3.20 1.00 [.126] [.039] 1.00 [.039] 2.54 [.100] RECOMMENDED P.C. BOARD LAYOUT 1.27 [.050] 6.84 [.269] ANODE (RED/YELLOW ANODE FOR BICOLOR) 1.09 [.043] Green Yellow Red Blue³ Orange INTEGRAL RESISTOR, 5 VOLTS .508 [.020] 551-0501 551-0601 551-0701 2.54 [.100] * 3.56 [.140] FOR BICOLOR 2.54 [.100] 1.09 [.043] COLOR Red Green Yellow LOW CURRENT 551-1101 551-1201 551-1301 Dimensions in mm [inches] Standard Polarity shown in drawing: Anode right Red Yellow Green BI-COLOR 551-3001 551-3101 Features • Designed to accommodate DIN 41494 • Mounting pin increases stability • Multiple CBIs form horizontal LED arrays on 5.0mm (0.197”) center-lines • High Contrast, UL 94 V-0 rated, black housing • Oxygen index: 31.5% • • • • Red/Green Yellow/Green To order any of the 551-xx01 part numbers with Reverse Polarity (Anode Left), please add -010 to the part numbers shown above. Polymer content: PBT, 0.519 g Housing stand-offs facilitate PCB cleaning Solderability per MIL-STD-202F, method 208F LEDs are safe for direct viewing per IEC 825-1, EN-60825-1 Tolerance note: As noted, otherwise: • LED Protrusion: ±0.04 mm [±0.016] • CBI Housing: ±0.02mm[±0.008] ³ PART NUMBER ORDERING CODE 5 5 1 – x x 0 1 – 0 1 0 Series LED Type Reverse Polarity Option 1) Anode Left ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC SENSITIVE DEVICES –010 Ordering Code Suffix required ONLY for Reverse Polarity Option 4-10 Dialight Corporation • 1501 Route 34 South • Farmingdale, NJ 07727 • TEL: (732) 919-3119 • FAX: (732) 751-5778 •www.dialight.com NEW 551-xx01 (DIN 41494 Compatible) Typical Operating Characteristics (TA=25°C) See LED data sheet for additional information See page 4-70 and 4-71 for Reference Only LED Drive Circuit Examples. See page 4-72 for Pin Out HIGH EFFICIENCY Part Number 551-0201 551-0301 551-0401 551-0801 551-2501 Peak Wavelength nm IV mcd Green 565 12.6 2.1* Yellow Red Blue Orange 585 635 428 600 10 10 12 7 2.1* 2* 3.5 2.2 Color VF Volts Test Current (mA) Viewing Angle 2Θ Θ½ LED Data sheet 10 60° 521-9210 4-58 10 10 10 10 60° 60° 70° 60° 521-9211 521-9216 521-9831 521-9498 4-58 4-58 4-57 4-58 Page # * IF = 20mA INTEGRAL RESISTOR, 5 VOLTS Part Number Color Peak Wavelength nm IV mcd Test Voltage Forward Current (mA) Viewing Angle 2Θ Θ½ LED Data sheet Page # 551-0501 551-0601 551-0701 Red Green Yellow 635 565 585 29 19 12.6 5 5 5 10 10 10 60° 60° 60° 521-9215 521-9323 521-9322 4-59 4-59 4-59 Color Peak Wavelength nm IV mcd VF Volts Test Current (mA) Viewing Angle 2Θ Θ½ LED Data sheet Page # Red Yellow Green 635 585 565 1.6 1.6 1.6 1.7 1.8 1.9 2 2 2 60° 60° 60° 521-9324 521-9325 521-9326 4-60 4-60 4-60 Color Peak Wavelength nm IV mcd VF Volts Test Current (mA) Viewing Angle 2Θ Θ½ LED Data sheet Page # LOW CURRENT Part Number 551-1101 551-1201 551-1301 BI-COLOR Part Number 551-3001 Red/Green 635/565 5 2 10 50° 521-9459 4-63 551-3101 Yellow/Green 585/565 4.3/6.3 2.1*/2.1* 10 80° 521-9478 4-62 * IF = 20mA Dialight Corporation • 1501 Route 34 South • Farmingdale, NJ 07727 • TEL: (732) 919-3119 • FAX: (732) 751-5778 •www.dialight.com 4-11 4 NEW 3mm Discrete LED Tinted, Diffused 521-9831 PART NO. SURFACE NOT FLAT 4.8 [.189] 4.4 [.173] 0.7 [.028] 0.4 [.016] 4.8 [.189] 4.4 [.173] 521-9831 0.6 [.024] 0.4 [.016] 2.9 [.114] ø 2.7 [.106] COLOR Blue³ 3.4 [.134] 3.1 [.122] 2.54 [.100] CATHODE 3.7 [.145] 3.5 [.138] 6.1 [.240] 5.7 [.224] 1.8 [.071] 1.2 [.047] 0.6 [.024] 0.4 [.016] 29 [1.142] 27 [1.063] MOUNTING CLIP: 515-0006 located on page 4-65 Dimensions in mm [inches] ATTENTION ³ OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC SENSITIVE DEVICES 4 Blue -9831 ABSOLUTE MAXIMUM RATINGS (TA=25°C) Power Dissipation (mW) 100 Forward Current (mA) Derating (mA/°C) From 55°C 20 .44 Operating Temperature (°C) -40/+100 Storage Temperature (°C) -40/+100 Soldering Temperature 260°C, 5 seconds, 1.6 mm from case Solder Adherence per MIL-STD-202E, Method 208C Blue OPERATING CHARACTERISTICS (TA=25°C) Luminous Intensity (mcd) IF=10mA -9831 Min. Typical 6.3 12 Peak Wavelength (nm) λ Peak Typical 428 Viewing Angle (2Θ½) Typical 70° Forward Voltage (V) IF=10mA Typical Max. 3.5 4.2 Reverse Voltage (V) IR=10µA Min. 3 Θ  is the off axis angle at which the luminous intensity is half the axial luminous intensity Dialight Corporation • 1501 Route 34 South • Farmingdale, NJ 07727 • TEL: (732) 919-3119 • FAX: (732) 751-5778 •www.dialight.com 4-57 3mm Discrete LED High Efficiency Diffused 521-9210, 4.45 [.175] 25.4 [1.0] MIN PART NO. COLOR 521-9210 Green 521-9211 Yellow 521-9216 Red 521-9498 Orange 521-9636 Red 3.30 [.13] 1.02 [.040] MIN 1.02 [.040] -9211, -9216, -9498, -9636 NEW 2.54 [.100] 3.00 [.118] 1.50 [.059] MAX 6.00 [.236] MOUNTING CLIP: 515-0006 located on page 4-65 .40 [.016] .45 [.016 ] short lead cathode all colors except 521-9636 Red. For 521-9636 Red, short lead is anode. Dimensions in mm [inches] Green Yellow Red Orange Red -9210 -9211 -9216 -9498 -9636 100 60 100 135 100 30 .4 20 .25 30 .4 25 .5 40 .51 Operating Temperature (°C) -55/+100 -55/+100 -55/+100 -55/+100 -55/+100 Storage Temperature (°C) -55/+100 -55/+100 -55/+100 -55/+100 -55/+100 ABSOLUTE MAXIMUM RATINGS (TA=25°C) Power Dissipation (mW) Forward Current (mA) Derating (mA/°C) From 50°C 1 from 25°C Soldering Temperature 260°C, 5 seconds, 1.6 mm from body Solder Adherence per MIL-STD-202E, Method 208C Green Yellow Red Orange Red OPERATING CHARACTERISTICS (TA=25°C) -9210 -9211 -9216 -9498 -9636 Luminous Intensity (mcd) IF=10mA 1 IF=20mA Min. Typical 4.7 12.6 7.4 10 7.4 10 3.4 7 8.71 481 Peak Wavelength (nm) λ Peak Typical 565 585 635 600 660 Viewing Angle (2Θ ½) Typical 60° 60° 60° 60° 60° Forward Voltage (V) IF=10mA 1 IF=20mA Typical Max. 2.11 2.81 2.11 2.81 21 2.81 2.2 3 1.81 2.41 Reverse Voltage (V), IR=100µA Max. 5 5 5 5 4 Θ  is the off axis angle at which the luminous intensity is half the axial luminous intensity 4-58 Dialight Corporation • 1501 Route 34 South • Farmingdale, NJ 07727 • TEL: (732) 919-3119 • FAX: (732) 751-5778 •www.dialight.com 3mm Discrete LED Integral Resistor, 5V Diffused 4.40 [.175] 1.01 [.040] 1.0 [.040] 521-9215, -9322, -9323 .457 [.018] SQ. 3.20 2.90 [.125] [.115] 2.54 [.100] 5.97 [.235] 2.41 [.950] MAX 1.27 [.050] PART NO. COLOR 521-9215 521-9322 521-9323 Red Yellow Green CATHODE MOUNTING CLIP: 515-0006 located on page 4-65 Dimensions in mm [inches] Red Yellow Green ABSOLUTE MAXIMUM RATINGS (TA=25°C) -9215 -9322 -9323 Forward Voltage (V) Derating (V/°C) From 50°C 7.5 .086 7.5 .086 7.5 .071 Operating Temperature (°C) -40/+85 -40/+85 -20/+85 Storage Temperature (°C) -55/+100 -55/+100 -55/+100 Soldering Temperature 260°C, 5 seconds, 1.6 mm from case Solder Adherence per MIL-STD-202E, Method 208C OPERATING CHARACTERISTICS (TA=25°C) Red Yellow Green -9215 -9322 -9323 Luminous Intensity (mcd) VF=5V Min. Typical 8.7 29 3.7 12.6 5.6 19 Peak Wavelength (nm) λ Peak Typical 635 585 565 Viewing Angle (2Θ½) Typical 60° 60° 60° Forward Current (mA) VF=5V Typical Max. 10 20 10 20 10 20 Reverse Voltage (V), IR=100µA Min. 5 5 5 Θ  is the off axis angle at which the luminous intensity is half the axial luminous intensity Dialight Corporation • 1501 Route 34 South • Farmingdale, NJ 07727 • TEL: (732) 919-3119 • FAX: (732) 751-5778 •www.dialight.com 4-59 4 3mm Discrete LED Low Current Diffused 521-9324, -9325, -9326 4.4 [.175] 1.01 [.040] .40 [.016] 1.0 [.040] 2.54 [.100] 3.3 [.130] 5.97 [.235] 1.00 26.67 [.040] [1.05] MIN. PART NO. COLOR 521-9324 521-9325 521-9326 Red Yellow Green .40 [.016] CATHODE Dimensions in mm [inches] MOUNTING CLIP: 515-0006 located on page 4-65 Red Yellow Green -9324 -9325 -9326 Power Dissipation (mW) 20 20 20 Forward Current (mA) Derating (mA/°C) From 90°C 7 .7 7 .7 7 .7 500 500 500 Operating Temperature (°C) -55/+100 -55/+100 -55/+100 Storage Temperature (°C) -55/+100 -55/+100 -55/+100 ABSOLUTE MAXIMUM RATINGS (TA=25°C) Peak Current (mA) Pulse width = 10 µs Soldering Temperature 260°C, 5 seconds, 1.6 mm from case Solder Adherence per MIL-STD-202E, Method 208C OPERATING CHARACTERISTICS (TA=25°C) Red Yellow Green -9324 -9325 -9326 Luminous Intensity (mcd) IF=2mA Min. Typical 1 1.6 1 1.6 1 1.6 Peak Wavelength (nm) λ Peak Typical 635 585 565 Viewing Angle (2Θ ½) Typical 60° 60° 60° Forward Voltage (V) IF=2mA Typical Max. 1.7 2.2 1.8 2.7 1.9 2.2 Reverse Voltage (V), IR=50µA Min. 5 5 5 Θ is the off axis angle at which the luminous intensity is half the axial luminous intensity  4-60 Dialight Corporation • 1501 Route 34 South • Farmingdale, NJ 07727 • TEL: (732) 919-3119 • FAX: (732) 751-5778 •www.dialight.com 3mm Discrete LED Bi-Color Non-Tinted, Diffused 521-9478, -9628, -9768 25.40 [1.00] MIN 1.02 [.040] 3.20 [.126] MAX RED CATHODE 521-9768 YELLOW CATHODE 521-9478 GREEN CATHODE 521-9628 3.00 [.118] 2.54 [.100] 4.45 [.175] 5.20 ±.5 [.205 ±.02] .50 [.020] TYP PART NO. COLOR 521-9478 Yellow/Green 521-9628 Red/Green 521-9768 Red/Yellow 2.54 [.100] NOM NOTE: MENISCUS MAY EXTEND 1.0MM [.040] DOWN FROM HOUSING Dimensions in mm [inches] MOUNTING CLIP: 515-0006 located on page 4-65 Yellow/Green Red/Green Red/Yellow ABSOLUTE MAXIMUM RATINGS (TA=25°C) -9478 -9628 -9768 Power Dissipation (mW) 60/100 140/100 100/60 Forward Current (mA) Derating (mA/°C) From 25°C 1 From 50°C 20/30 .251/.401 40/30 .5/.4 30/20 .41/.251 Peak Current (mA) 80/120 200/120 120/80 Operating Temperature (°C) -55/+100 -55/+100 -55/+100 Storage Temperature (°C) -55/+100 -55/+100 -55/+100 Pulse width = 10µs Soldering Temperature 260°C, 5 seconds, 1.66 mm from case Solder Adherence per MIL-STD-202E, Method 208C OPERATING CHARACTERISTICS (TA=25°C) Luminous Intensity (mcd) Min. IF=10mA * IF=20mA Typical Yellow/Green Red/Green Red/Yellow -9478 -9628 -9768 2.5/2.5 4.3/6.3 3.7*/1.1* 12.6*/3.7* 1.7*/1.7* 5.6*/5.6* Peak Wavelength (nm) λ Peak Typical 585/565 660/565 630/585 Viewing Angle (2Θ ½) Typical 80° 200° 80° Forward Voltage (V) IF=20mA Typical Max. 2.1/2.1 2.8/2.8 1.8/2.1 2.4/2.8 2/2.1 2.8/2.8 5 5 5 Reverse Voltage (V) IR=100ua Min. Θ  is the off axis angle at which the luminous intensity is half the axial luminous intensity 4-62 Dialight Corporation • 1501 Route 34 South • Farmingdale, NJ 07727 • TEL: (732) 919-3119 • FAX: (732) 751-5778 •www.dialight.com 3mm Discrete LED Bi-Color Non-Tinted, Diffused 4.59 [.181] 4.0 [.158] 1.0 [.040] 521-9459 CATHODE GREEN 3.40 [.134] MAX .50 [.020] SQ. NOM. 3.00 [.118] PART NO. COLOR 521-9459 Red/Green 2.54 [.100] 1.80 [.071] MAX 6.10 [.240] MOUNTING CLIP: 515-0006 located on page 4-65 26.92 [1.06] MIN Dimensions in mm [inches] 4 Red/Green -9459 ABSOLUTE MAXIMUM RATINGS (TA=25°C) Power Dissipation (mW) 140 Forward Current (mA) Derating (mA/°C) From 25°C 45 .6 Peak Current (mA) 1000 Pulse width = 10µs Operating Temperature (°C) -55/+100 Storage Temperature (°C) -55/+100 Soldering Temperature 260°C, 5 seconds, 1.6 mm from case Solder Adherence per MIL-STD-202E, Method 208C Red/Green OPERATING CHARACTERISTICS (TA=25°C) Luminous Intensity (mcd) IF=10mA -9459 Min. Typical 2.5/3.7 4.7/10 Peak Wavelength (nm) λ Peak Typical 635/565 Viewing Angle (2Θ½) Typical 50° Forward Voltage (V) IF=10mA Typical Max. 2/2.1 2.8/2.8 Θ  is the off axis angle at which the luminous intensity is half the axial luminous intensity Dialight Corporation • 1501 Route 34 South • Farmingdale, NJ 07727 • TEL: (732) 919-3119 • FAX: (732) 751-5778 •www.dialight.com 4-63