558-6203-802F

REV OPERATING CHARACTERISTICS AT 25 C $ AMBIENT DOMINANT WAVELENGH (nm) PEAK WAVELENGTH (nm) TYP MIN TYP 518 527 531 MAX MIN TYP MAX MIN TYP MAX 535 100 50 85 110 1.9 2.1 3.0 ABSOLUTE MAXIMUM RATINGS AT 25 FORWARD VOLTAGE (V) @ IF =20mA REVERSE CURRENT ( A) MIN TYP MAX MAX 3.0 3.5 4.0 100 @ VR=5V FORWARD VOLTAGE (V) @ IF =2mA LUMINOUS INTENSITY (mcd) @ IF =2mA VIEWING ANGLE ( $) 2 1/2 C $ AMBIENT VALUES UNITS 120 mW CONTINUOUS FORWARD CURRENT 30 mA PEAK FORWARD CURRENT (1/10 DUTY CYCLE, 0.1 ms PULSE WIDTH) 100 mA DERATING LINEAR FROM 30 C $ 0.5 mA/ $C POWER DISSIPATION REVERSE VOLTAGE 5 V 260 FOR 5 SEC $C OPERATING TEMPERATURE -25 TO +80 $C STORAGE TEMPERATURE -30 TO +100 $C SOLDERING TEMPERATURE (.079" FROM BODY) ECN NO REVISIONS DRN CKD APP DATE A NEW RELEASE AJF KLJ CJC 1-11-10 B LUMINOUS INTENSITY MIN. TYP. MAX. WERE "38,58,85" AJF KLJ CJC 8-2-10 .190 [4,83] 3mm LED .127 #.031 [3,22 #0,79] HOUSING DIALCO 558-XXXX .407 #.036 [10,34 #0,91 ] .032 [0,81] 14.000 #.109 [355,6 #2,77] NOTES: RED WIRE BLACK WIRE 1. DIE: InGaN GREEN. 2. LENS: WHITE DIFFUSED. 3. REQUIRES EXTERNAL RESISTOR. ANODE LEAD .500 #.020 [12,7 #0,5] 2 1 4. PIN NUMBERS FOR REFERENCE ONLY, DESIGNATION NON-EXISTENT ON PART. CATHODE LEAD RoHS COMPLIANT 558-6203-802F Part Numbers with the "F" suffix ending are RoHS Compliant. Packaging is marked with "RoHS Compliant" label or equivalent markings. Parts can be wave soldered, dip soldered or hand soldered using typical lead-free soldering process with max 260°C temp. for 5 sec. 5. RECOMMENDED MOUNTING HOLE: .155-.158" DIA. ON PANELS .031-.062" THICK. 6. DIALIGHT PART NUMBER 558-6203-802F. 7. THIS ASSEMBLY CONTAINS ELECTROSTATIC DISCHARGE SENSITIVE DEVICES (ESDS). MAINTAIN ALL PRECAUTIONARY MEASURES DURING ASSEMBLY, HANDLING, AND STORAGE IN ACCORDANCE WITH IPC-A-610. THIS DRAWING AND THE CONTENTS HEREIN ARE CONFIDENTIAL AND THE SOLE PROPERTY OF DIALIGHT. REPRODUCTION OF THIS DRAWING OR CONSTRUCTION OF ANY PARTS WITHIN THIS DRAWING ARE FORBIDDEN WITHOUT THE WRITTEN CONSENT OF DIALIGHT. SCALE: DRAWING SCALE ATTENTION: OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC SENSITIVE DEVICES C-17812 TOLERANCES: UNLESS OTHERWISE SPECIFIED PIN 1 CATHODE PIN 2 LED SCHEMATIC FRACTIONS: #1/64 DECIMALS (.XX): #.02 DECIMALS (.XXX): #.015 REV DRAWING NUMBER ALL DIM'S IN: INCHES (MM) TITLE B SNAP-IN LED PMI MATERIAL ANGLES: #3 $ FINISH: 1501 ROUTE 34 SOUTH FARMINGDALE, NJ 07727 FSCM 83330 SHEET 1 OF 1 FAMILY TABLE: