566-0406F

2mm x 5mm Rectangular LED CBI® Circuit Board Indicator PART NO. 566-0206 566-0306 566-0406 11.68 [.46] 3.43 [.135] 5.05 [.199] 7.11 [.280] .50 [.020] 3.81 [.150] Cathode 7.62 [.300] 10.16 [.400] .51 [.020] COLOR Green Yellow Red 2.79 [.110] 3.81 [.150] 1.91 [.075] 566-xx06 2X .50 [.020] SQ. 2.11 [.083] Ø 1.24 [.049] Ø 1.02 [.040] 1.27 [.050] 2X Ø 1.01 [.040] • Multiple CBIs form horizontal LED arrays on 3.96mm (0.156”) center-lines • High Contrast, UL 94 V-0 rated, black housing 3.81 [.150] D 6.35 [.250] ANODE RECOMMENDED HOLE PATTERN GUIDE 3.68 [.145] Features Dimensions in mm [inches] • Oxygen index: 32% • Polymer content: PBT, 0.309 g • Housing stand-offs facilitate PCB cleaning • Solderability per MIL-STD-202F, method 208F • LEDs are safe for direct viewing per IEC 825-1, EN-60825-1 5 Tolerance note: As noted, otherwise: • LED Protrusion: ±0.04 mm [±0.016] • CBI Housing: ±0.02mm[±0.008] Typical Operating Characteristics (TA=25°C) See LED data sheet for additional information See Page 5-20 and 5-21 for Reference Only LED Drive Circuit Example See Page 5-22 for Pin Out Part Number Color Peak Wavelength nm IV mcd VF Volts Test Current (mA) Viewing Angle 2Θ Θ½ LED Data sheet Page # 566-0206 566-0306 566-0406 Green Yellow Red 565 583 635 4 3.5 7.4 2.2 2.1 2 20 20 20 110° 110° 140° 521-9332 521-9452 521-9499 5-16 5-16 5-16 Dialight Corporation • 1501 Route 34 South • Farmingdale, NJ 07727 • TEL: (732) 919-3119 • FAX: (732) 751-5778 •www.dialight.com 5-7 2mm x 5mm Discrete LED Rectangular Tinted, Diffused 521-9332, PART NO. COLOR DRAWING 521-9332 521-9452 521-9499 521-9718 Green Yellow Red Blue A A B B 2.11 [.083] 7.70 [.303] 1.00 [.040] 4.82 [.190] 2.54 [.100] CATHODE .51 [.020] 25.4 [1.00] -9452, -9499, -9718 DRAWING A 2.00 [.079] DIM. L 1.00 [.040] 2.54 [.100] 5.00 [.197] CATHODE .51 [.020] 25.4 [1.00] DRAWING B Dimensions in mm [inches] DIM. L Red 7.50 [.295] Blue 7.00 [.275] Green Yellow Red Blue -9332 -9452 -9499 -9718 Power Dissipation (mW) 135 85 100 189 Forward Current (mA) Derating (mA/°C) From 50°C 1. mW/°C From 25°C 30 .5 20 .34 30 .4 30 .451 500* 500* 120 180 Operating Temperature (°C) -20/+100 -55/+100 -55/+100 -25/+75 Storage Temperature (°C) -55/+100 -55/+100 -55/+100 -25/+100 ABSOLUTE MAXIMUM RATINGS (TA=25°C) Peak Current (mA) Pulse width = 1 ms *Pulse width = 10 µs Soldering Temperature 260°C, 5 seconds, 1.6 mm from case Solder Adherence per MIL-STD-202E, Method 208C OPERATING CHARACTERISTICS (TA=25°C) Green Yellow Red Blue -9332 -9452 -9499 -9718 Luminous Intensity (mcd) IF=20mA Min. Typical 2.6 4 2.2 3.5 3 7.4 9 18 Peak Wavelength (nm) λ Peak Typical 565 583 635 430 Viewing Angle (2Θ ½) Typical 110° 110° 140° 120° Forward Voltage (V) IF=20mA Typical Max. 2.2 3 2.1 2.6 2 2.8 5.3 6 Reverse Voltage (V), IR=100µA Min. 5 5 5 5 Θ  is the off axis angle at which the luminous intensity is half the axial luminous intensity 5-16 Dialight Corporation • 1501 Route 34 South • Farmingdale, NJ 07727 • TEL: (732) 919-3119 • FAX: (732) 751-5778 •www.dialight.com