568-0301-111F

REV. ECN NO. LED COLOR PART NUMBER and LEGEND POSITION 1 POSITION 2 POSITION 3 POSITION 4 568-0301-111F RED RED RED RED 568-0301-112F RED RED RED GREEN 568-0301-122F RED RED GREEN GREEN 568-0302-111F GREEN RED RED RED 568-0302-222F GREEN GREEN GREEN GREEN 568-0302-323F GREEN YELLOW GREEN YELLOW 568-0303-132F YELLOW RED YELLOW GREEN 568-0303-232F YELLOW GREEN YELLOW GREEN 568-0303-332F YELLOW YELLOW YELLOW GREEN 568-0303-333F YELLOW YELLOW YELLOW YELLOW REVISIONS A DRN. CKD. APP. RSK WFB NEW RELEASE DATE NO 12-11-14 CATHODE ID .150 ±.015 .170 MAX .415 REF POS.1 .200 POS.2 .800 REF .200 POS.3 .200 POS.4 .100 .145 # .010 TYP. PIN 1.3.5.7 CATHODE LEAD SEE NOTE 5 .100 .110 # .010 # .010 .075 # .010 .150 # .010 .225 # .010 TOP LED (LONG LEADS) 1 3 5 7 NOTES: 2 4 OPERATING CHARACTERISTICS AT 25 $ C AMBIENT CHARACTERISTICS LUMINOUS INTENSITY PIN 1,3,5,7 CATHODE PIN 2,4,6,8 SINGLE COLOR LED SCHEMATIC FORWARD CURRENT REVERSE VOLTAGE # .002 .150 # .002 .075 # .002 ( 8X ) MIN TYP RED 8.7 29 YELLOW 3.7 12.6 GREEN 5.6 19 VIEWING ANGLE 10 15 YELLOW 10 15 GREEN 12 15 5 RED 635 YELLOW 583 GREEN 565 ALL 60 ABSOLUTE MAXIMUM RATING AT 25°C AMBIENT .100 # .002 .110 REF. RECOMMENDED HOLE PATTERN MAX RED ALL PEAK WAVELENGTH .225 L.E.D. COLOR UNITS mcd V F = 5.0 V mA V F = 5.0 V V I = 100 µA nm Degree RED YELLOW GREEN V 5.0 5.0 5.0 V 7.5 7.5 7.5 LEAD SOLDERING TEMPERATURE, 5 SEC., 1/16" FROM BODY °C 260 260 260 OPERATING TEMPERATURE °C -40 TO +85 -40 TO +85 -40 TO +85 STORAGE TEMPERATURE °C -55 TO +100 -55 TO +100 -55 TO +100 I = 100 µA D.C. FORWARD VOLTAGE 8 TEST CONDITIONS UNITS REVERSE VOLTAGE 6 1- LEADS TO FIT INTO HOLES SPACED AS PER HOLE PATTERN 2- WHEN A ZERO APPEARS IN THE LAST 4 DIGITS OF THE PART NUMBER THIS MEANS NO LAMP REQUIRED IN THAT POSITION 3- LED LEAD DIMENSIONS SHOWN ARE MEASURED AT HOUSING EXIT 4- PIN NUMBERS FOR REFERENCE ONLY 5- LED LEAD THICKNESS = .018 X .016 = ALL LEDs 6- DIALIGHT PART NUMBER = 568-030X-XXXF (SEE CHART FOR ALL PART NUMBERS) THIS DRAWING AND THE CONTENTS HEREIN ARE CONFIDENTIAL AND THE SOLE PROPERTY OF DIALIGHT. REPRODUCTION OF THIS DRAWING OR CONSTRUCTION OF ANY PARTS WITHIN THIS DRAWING ARE FORBIDDEN WITHOUT THE WRITTEN CONSENT OF DIALIGHT. SCALE: 4.000 ALL DIM'S IN: INCHES (MM) DRAWING NUMBER C-18135 TOLERANCES: UNLESS OTHERWISE SPECIFIED FRACTIONS: # 1/64 DECIMALS (.XX): # .020 .01 .005 DECIMALS (.XXX): # .015 DECIMALS (.XXXX): # .0005 1 $ ANGLES: # 3 TITLE 83330 A STANDARD 4X1 CBI BLOCK MATERIAL FINISH: FSCM REV 1501 ROUTE 34 SOUTH FARMINGDALE, NJ 07727 SHEET 1 OF 1 FAMILY TABLE: