568-2211-111F

3mm LED CBI® Circuit Board Indicator Quad-Level For Backlighting 0.38 [.015] 4.32 [.170] PART NO. 13.97 [.550] CATHODE ID COLOR* HIGH EFFICIENCY, TINTED, NON DIFFUSED LED 1 5.08 [.200] LED 2 568-2211-111 568-2212-222 568-2212-323 568-2213-232 20.32 [800] 5.08 [.200] LED 3 5.08 [.200] LED 4 568-221x-xxx 2.54 [.100] Red-Red-Red-Red Green-Green-Green-Green Green-Yellow-Green-Yellow Yellow-Green-Yellow-Green 3.68 [.145] .051 [.020] * LED 1, LED 2, LED 3, LED 4. 6.22 [.245] 2.54 [.100] 1.91 [075] CATHODE TOP LED Recommended PB Board layout 2.54 [.100] PART NUMBER ORDERING CODE Dimensions in mm [inches] Series Ø 1.09 [.043] ±0.05 ±.002 2.54 [.100] LED 2 LED 1 4 568-221x-xxx Features LED 4 LED 3 COLORS: 0) Blank 1) Red 2) Green 3) Yellow • Extended housing and narrow viewing angle LEDs reduce light bleed • Multiple CBIs form horizontal LED arrays on 4.45mm (0.175”) center-lines. • High Contrast, UL 94 V-0 rated, black housing • Oxygen index: 32% • • • • Polymer content: PBT, 0.959 g Housing stand-offs facilitate PCB cleaning Solderability per MIL-STD-202F, method 208F LEDs are safe for direct viewing per IEC 825-1, EN-60825-1 • Compatible with: 551-xx02 Single 553-22xx-100 Bi-Level 564-2210-xxx Tri-Level Custom Combinations • Contact factory for information on custom color combinations. Tolerance note: As noted, otherwise: • LED Protrusion: ±0.04 mm [±0.016] • CBI Housing: ±0.02mm[±0.008] Typical Operating Characteristics @ TA=25°C See LED data sheet for additional information See Pages 4-73 and 4-74 for LED Drive Circuit Examples See Page 4-72 for Pin Out Part Number Color Peak Wavelength nm IV mcd V F* Volts Test Current (mA) Viewing Angle 2Θ Θ½ LED Data sheet Page # 568-221x-xxx Red Green Yellow 635 565 585 29 50 20 2 2.1 2.1 10 10 10 45° 45° 45° 521-9432 521-9430 521-9431 4-61 4-61 4-61 * IF = 20mA Dialight Corporation • 1501 Route 34 South • Farmingdale, NJ 07727 • TEL: (732) 919-3119 • FAX: (732) 751-5778 •www.dialight.com 4-49 3mm Discrete LED High Efficiency Tinted, Non-Diffused 521-9430, -9431, -9432 3.2 [.126] 4.44 [.175] 1.0 [.040] .457 [.018] 1.0 [.040] PART NO. COLOR 521-9430 521-9431 521-9432 Green Yellow Red 2.54 [.100] 3.0 [.118] 5.97 MAX [.235] 25.4 [.100] MIN 1.27 [.050] .40 [.016] CATHODE Dimensions in mm [inches] MOUNTING CLIP: 515-0006 located on page 4-65 Green Yellow Red -9430 -9431 -9432 Power Dissipation (mW) 100 60 100 Forward Current (mA) Derating (mA/°C) From 50°C 30 .4 20 .25 30 .4 Peak Current (mA) 120 80 120 Operating Temperature (°C) -55/+100 -55/+100 -55/+100 Storage Temperature (°C) -55/+100 -55/+100 -55/+100 ABSOLUTE MAXIMUM RATINGS (TA=25°C) Pulse width = 100µs Soldering Temperature 260°C, 5 seconds, 1.6 mm from case Solder Adherence per MIL-STD-202E, Method 208C OPERATING CHARACTERISTICS (TA=25°C) Green Yellow Red -9430 -9431 -9432 Luminous Intensity (mcd) IF=10mA Min. Typical 32 50 10 20 8.7 29 Peak Wavelength (nm) λ Peak Typical 565 585 635 Viewing Angle (2Θ½) Typical 45° 45° 45° Forward Voltage (V) IF=20mA Typical Max. 2.1 2.8 2.1 2.8 2 2.8 Θ  is the off axis angle at which the luminous intensity is half the axial luminous intensity Dialight Corporation • 1501 Route 34 South • Farmingdale, NJ 07727 • TEL: (732) 919-3119 • FAX: (732) 751-5778 •www.dialight.com 4-61 4