571-0111F

ASSY. NO. LED COLOR (DIFFUSED) REV TOP POSITION BOTTOM POSITION 571-0101F BLANK RED 571-0102F BLANK GREEN 571-0103F BLANK YELLOW 571-0110F RED BLANK 571-0111F RED RED 571-0112F RED GREEN 571-0113F RED YELLOW 571-0120F GREEN BLANK 571-0121F GREEN RED 571-0122F GREEN GREEN 571-0123F GREEN YELLOW 571-0130F YELLOW BLANK 571-0131F YELLOW RED 571-0132F YELLOW GREEN 571-0133F YELLOW YELLOW RoHS Compliant 571-01XXF Part Numbers with the "F" suffix ending are RoHS Compliant. Example: 571-0112F Packaging is marked with "RoHS Compliant" label or equivalent markings. Parts can be wave soldered, dip soldered or hand soldered using typical lead-free soldering process with max 260°C temp. for 5 sec. +.015 -.008 +0,38 1,72 -0,20 .068 .200 [5,08] .098 [2,48] .200 [5,08] .150 [3,8] [ ECN NO REVISIONS DRN CKD APP A NEW RELEASE B ADDED WAVE SOLDERING PROFILE & NOTES 5,6,7,8,9 CE AE AJF KLJ DATE NO 1-24-08 NO 9-21-11 .539 [13,7] ] .054 [1,37] TOP LED 2 mm DOT POINT LED 571 .339 .150 [8,6] [3,81] RECOMMENDED WAVE SOLDERING PROFILE .015 [0,38] .100 [2,54] .020X.016 [.51X.41] .015 [0,38] .100 [2,54] .071 .008 [1,8 0,2 ] BOT. LED .118 .010 [3 0,25 ] CATHODE .020 [0,51] .10 [2,5] TYP. .19 [4,8] 1 2 3 4 OPERATING CHARACTERISTICS AT 25 C AMBIENT CHARACTERISTICS COLOR LUMINOUS INTENSITY GREEN 5 FORWARD VOLTAGE DOMINANT WAVELENGTH PEAK EMISSION WAVELENGTH VIEWING ANGLE 2 q1/2 CAPACITANCE MIN TYP RED 8 15 YELLOW 5 8 MAX UNITS TEST CONDITIONS mcd I F = 10 mA V I F = 20 mA 10 RED 2.0 2.5 YELLOW 2.1 2.5 GREEN 2.2 2.5 RED 625 YELLOW 588 GREEN 568 RED 627 YELLOW 590 GREEN 565 RED 70 YELLOW 70 GREEN 70 RED 15 YELLOW 20 GREEN 15 ABSOLUTE MAXIMUM RATING AT 25°C AMBIENT .100 .002 [2,54 0,05 ] TYP (3) .040 .002 [1,02 0,05 ] TYP (4) nm nm RECOMMENDED PC BOARD HOLE PATTERN Degree pF V F YELLOW GREEN UNITS POWER DISSIPATION 105 105 105 mW FORWARD CURRENT 30 30 25 mA .33 mA/ C C REVERSE VOLTAGE LEAD SOLDERING TEMPERATURE, 5 SEC., 1/16" FROM BODY 3 CATHODE 4 ANODE = 0 V, f = 1 MHz RED DERATING LINEAR FROM 25 2 ANODE PIN 1 CATHODE .40 5 V 260 °C OPERATING TEMPERATURE -40 TO +85 °C STORAGE TEMPERATURE -40 TO +85 °C NOTES: 1. LED LEAD DIMENSIONS ARE MEASURED AT HOUSING EXIT. 2. PIN NUMBERS FOR REFERENCE ONLY, DESIGNATION NON-EXISTENT ON PARTS 3. DIALIGHT PART NUMBERS: 571-01XXF 4. THIS ASSEMBLY CONTAINS ELECTROSTATIC DISCHARGE SENSITIVE DEVICES (ESDS). MAINTAIN ALL PRECAUTIONARY MEASURES DURING ASSEMBLY, HANDLING AND STORAGE IN ACCORDANCE WITH 1PC-A-610. 5. RECOMMENDED WAVE SOLDERING TEMPERATURE: 245 C~260 C. 6. DO NOT APPLY STRESS TO THE EPOXY RESIN WHEN TEMPERATURE IS ABOVE 85 C. 7. SOLDERING PROFILE APPLIES TO LEAD FREE SOLDERING PROCESS (Sn/Cu/Ag ALLOY). 8. DURING WAVE SOLDERING, THE PCB TOP SURFACE SHOULD BE KEPT BELOW 105 C. 9. DO NOT SOLDER MORE THAN ONCE. THIS DRAWING AND THE CONTENTS HEREIN ARE CONFIDENTIAL AND THE SOLE PROPERTY OF DIALIGHT. REPRODUCTION OF THIS DRAWING OR CONSTRUCTION OF ANY PARTS WITHIN THIS DRAWING ARE FORBIDDEN WITHOUT THE WRITTEN CONSENT OF DIALIGHT. SCALE: DRAWING SCALE C-17454 TOLERANCES: UNLESS OTHERWISE SPECIFIED FRACTIONS: 1/64 DECIMALS (.XX): .01 DECIMALS (.XXX): .005 DECIMALS (.XXXX): .0005 ANGLES: 1 TITLE B 2mm LED BI-LEVEL CBI RoHS COMPLIANT MATERIAL FINISH: FSCM REV DRAWING NUMBER ALL DIM'S IN: INCHES (MM) 1501 ROUTE 34 SOUTH FARMINGDALE, NJ 07727 83330 SHEET 1 OF 1 FAMILY TABLE: