571-0133F

ASSY. NO. 571-0101F 571-0102F 571-0103F 571-0110F LED COLOR (DIFFUSED) TOP POSITION BLANK BLANK RED RED RED RED GREEN 571-0122F GREEN 571-0123F 571-0130F 571-0131F 571-0132F 571-0133F GREEN RED 571-0120F 571-0121F BLANK UPDATED NOTE 5 TO HAVE SOLDERING TIME. ADDED DIMENSION OF DOME LENGTH ON LED AE DATE NO 1-24-08 AJF KLJ NO 9-21-11 VP NO 3-14-16 JTD RED GREEN GREEN YELLOW YELLOW RED BLANK YELLOW +.015 -.008 +0,38 1,72 -0,20 .068 GREEN YELLOW [ YELLOW ] .060 .010 [1,52 0,25 ] .200 [5,08 ] .098 [2,48 ] .200 [5,08 ] .150 [3,8 ] .539 [13,7 ] .054 [1,37 ] TOP LED 2 mm DOT POINT LED 571 .339 .150 [8,6 ] [3,81 ] .015 [0,38 ] .100 [2,54 ] .020X.016 [.51X.41] .015 [0,38 ] .100 [2,54 ] RECOMMENDED WAVE SOLDERING PROFILE .071 .008 [1,8 0,2 ] BOT. LED .118 .010 [3 0,25 ] CATHODE .020 [0,51 ] .10 [2,5 ] TYP. .19 [4,8 ] 1 OPERATING CHARACTERISTICS AT 25 $ C AMBIENT CHARACTERISTICS COLOR LUMINOUS INTENSITY YELLOW FORWARD VOLTAGE DOMINANT WAVELENGTH PEAK EMISSION WAVELENGTH RED GREEN RED MIN TYP 8 15 5 5 10 2.0 YELLOW 2.1 RED 625 GREEN YELLOW GREEN RED 2.2 588 568 627 YELLOW 590 RED 70 GREEN 565 YELLOW 70 CAPACITANCE YELLOW RED 15 GREEN GREEN MAX 8 VIEWING ANGLE 2 q1/2 70 20 15 ABSOLUTE MAXIMUM RATING AT 25°C AMBIENT POWER DISSIPATION FORWARD CURRENT DERATING LINEAR FROM 25 LEAD SOLDERING TEMPERATURE, 3 SEC., 1/16" FROM BODY STORAGE TEMPERATURE CE NEW RELEASE ADDED WAVE SOLDERING PROFILE & NOTES 5,6,7,8,9 B C DRN CKD APP BLANK YELLOW OPERATING TEMPERATURE REVISIONS YELLOW GREEN REVERSE VOLTAGE ECN NO A RoHS Compliant 571-01XXF Part Numbers with the "F" suffix ending are RoHS Compliant. Example: 571-0112F Packaging is marked with "RoHS Compliant" label or equivalent markings. Parts can be wave soldered, dip soldered or hand soldered using typical lead-free soldering process with max 260°C temp. for 5 sec. GREEN YELLOW 571-0112F 571-0113F RED BLANK 571-0111F REV BOTTOM POSITION 2.5 2.5 2.5 UNITS 2 3 4 TEST CONDITIONS mcd I F = 10 mA V I F = 20 mA .100 .002 [2,54 0,05 ] TYP (3) .040 .002 [1,02 0,05 ] TYP (4) nm 2 ANODE PIN 1 CATHODE nm RECOMMENDED PC BOARD HOLE PATTERN Degree pF V F 3 CATHODE 4 ANODE = 0 V, f = 1 MHz ATTENTION: RED YELLOW GREEN UNITS 30 30 25 mA 105 105 .40 5 105 .33 mW mA/ V 260 °C -40 TO +85 °C -40 TO +85 °C OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC SENSITIVE DEVICES NOTES: 1. LED LEAD DIMENSIONS ARE MEASURED AT HOUSING EXIT. 2. PIN NUMBERS FOR REFERENCE ONLY, DESIGNATION NON-EXISTENT ON PARTS 3. DIALIGHT PART NUMBERS: 571-01XXF 4. THIS ASSEMBLY CONTAINS ELECTROSTATIC DISCHARGE SENSITIVE DEVICES (ESDS). MAINTAIN ALL PRECAUTIONARY MEASURES DURING ASSEMBLY, HANDLING AND STORAGE IN ACCORDANCE WITH 1PC-A-610. 5. RECOMMENDED WAVE SOLDERING TEMPERATURE: 245 $ C~260 $ C FOR 3 SEC FOR BOTTOM LED AND 5 SEC FOR TOP LED. 6. DO NOT APPLY STRESS TO THE EPOXY RESIN WHEN TEMPERATURE IS ABOVE 85 $ C. 7. SOLDERING PROFILE APPLIES TO LEAD FREE SOLDERING PROCESS (Sn/Cu/Ag ALLOY). 8. DURING WAVE SOLDERING, THE PCB TOP SURFACE SHOULD BE KEPT BELOW 105 $ C. 9. DO NOT SOLDER MORE THAN ONCE. THIS DRAWING AND THE CONTENTS HEREIN ARE CONFIDENTIAL AND THE SOLE PROPERTY OF DIALIGHT. REPRODUCTION OF THIS DRAWING OR CONSTRUCTION OF ANY PARTS WITHIN THIS DRAWING ARE FORBIDDEN WITHOUT THE WRITTEN CONSENT OF DIALIGHT. SCALE: DRAWING SCALE ALL DIM'S IN: INCHES (MM) DRAWING NUMBER C-17454 TOLERANCES: UNLESS OTHERWISE SPECIFIED FRACTIONS: # 1/64 DECIMALS (.XX): # .01 DECIMALS (.XXX): # .005 DECIMALS (.XXXX): # .0005 ANGLES: # 1 $ TITLE 83330 C 2mm LED BI-LEVEL CBI RoHS COMPLIANT MATERIAL FINISH: FSCM REV 1501 ROUTE 34 SOUTH FARMINGDALE, NJ 07727 SHEET 1 OF 1 FAMILY TABLE: