586-1105-101

FEATURES / BENEFITS 586 Series Single Chip BASED LED  RoHS Compliant T 1 3/4 MIDGET FLANGE  No heat generated  High brightness with low current draw - uses up to 90% less energy than incandescent  Long life - up to 100K hours  Mounts directly into industry-standard socket  Resistant to shock and vibration  AlInGaP and InGaN technology  Super bright single chip design  Colors include red, green, yellow, blue and white Dialight's line of based LED lamps is designed to directly replace many popular subminiature and miniature incandescent lamps. The benefits of LED technology over incandescent are significant: They offer long life, are shock resistant, withstand vibration and provide energy conservation. SPECIFICATIONS .242 [6.15] .284 [7.2] .558 [14.18] Measurements are typical Dimensions are inches [mm] CENTER CONTACT (+) PLUS  Operating Voltages: 6, 14, and 28 VDC  Operating temperature: -40oC to +80oC Storage temperature: -40oC to +100oC  Replaces incandescent lamp numbers: 327, 328, 330, 345,349, 350, 376, 377, 380, 381, 382, 385, 387, and 7341*  * See Dialight’s Incandescent lamp/based LED cross reference for a complete listing. CONSIDERATIONS  Since lens caps act as filters for the light emitted from the based LED, it is important to match the emitting color of the LED. If not matched properly, the overall light output may be substantially reduced. Dialight recommends using transparent lenses, which will optimize the light output.  Although these lamps can be operated at a lower voltage, which will increase the life, the intensity will be reduced.  Operation of the based LED at a higher voltage should not exceed 10% above the recommended voltage.  Dialight does not recommend that based LED lamps be used in neon sockets. Dialight reserves the right to make changes at any time in order to supply the best product possible. Dialight Corporation 1501 Route 34 South • Farmingdale, NJ 07727 USA Tel: (1) 732-919-3119 • Fax: (1) 732-751-5778 • www.dialight.com MDEL586Q001_B 586 Series Single Chip BASED LED T 1 3/4 MIDGET FLANGE T 1 3/4 MIDGET FLANGE - POLARIZED COLOR PEAK WAVELENGTH (nm) VOLTAGE (VDC) CURRENT TYP.-(mA) INTENSITY TYP.-(mcd) RoHS COMPLIANT 586-1101-101F Red 639 6 10 775  586-1102-101F Green 520 6 10 600  586-1103-101F Yellow 592 6 10 775  586-1105-101F Blue 467 6 10 210  586-1106-101F White * 6 10 460  586-1101-103F Red 639 14 10 775  586-1102-103F Green 520 14 10 600  586-1103-103F Yellow 592 14 10 775  586-1105-103F Blue 467 14 10 210  586-1106-103F White * 14 10 460  586-1101-105F Red 639 28 10 775  586-1102-105F Green 520 28 10 600  586-1103-105F Yellow 592 28 10 775  586-1105-105F Blue 467 28 10 210  586-1106-105F White * 28 10 460  PART NUMBER * Color coordinates: x = .320, y = .320 Based LE Ds SELECTION With the technological advancements in Light Emitting Diodes (LEDs) brightness can now rival the incandescent lamp when used in similar packages. These advancements have created a new type of product called the based LED - an LED with the functionality of an incandescent bulb. The following styles are currently available in red, green, yellow, blue and white:  T 1 3/4 Midget Flange  T 1 3/4 Bi-Pin  T 1 3/4 Wedge (T5)  T 2 Telephone Slide  T 3 1/4 Miniature Bayonet (BA9S)  T 3 1/4 Miniature Screw (E10)  T 3 1/4 Wedge (T10)  15mm SC Bayonet (BA15S) Dialight’s line of based LEDs continues to grow. Please visit our website for more information. www.dialight.com Dialight reserves the right to make changes at any time in order to supply the best product possible. Dialight Corporation 1501 Route 34 South • Farmingdale, NJ 07727 USA Tel: (1) 732-919-3119 • Fax: (1) 732-751-5778 • www.dialight.com MDEL586Q001_B