586-220A-203F

FEATURES / BENEFITS RoHS Compliant Unique multi-LED design provide superior illumination and ability to mix colors True non-polarized design Incorporating AlInGaP and InGaN technology Mounts directly into industry standard socket High brightness with low current draw - uses up to 90% less energy than incandescent Long Life - up to 100K hours No heat generated Resistant to shock and vibration Colors include red, green, yellow, blue and white, as well as white/yellow and white/orange combinations Dialight's line of based LED lamps is designed to directly replace many popular subminiature and miniature incandescent lamps. The benefits of LED technology over incandescent are significant: They offer long life, are shock resistant, withstand vibration and provide energy conservation. 586 Series BASED LED T3 1/4 WEDGE (T10) SPECIFICATIONS Operating Voltages: 6,12,14 and 24 VDC Non-polarized Operating temperature: -30oC to +85oC Storage temperature: -40oC to +100oC Replaces incandescent lamp numbers*: 159, 259, 444, 447, 555, 124, 158, 161, 168, 193 194, 658, 184, 3-505, 3-507 Measurements are typical Dimensions are inches [mm] *See Dialight’s Incandescent lamp/based LED cross reference for a complete listing CONSIDERATIONS Since lens caps act as filters for the light emitted from the based LED, it is important to match the emitting color of the LED. If not matched properly, the overall light output may be substantially reduced. Dialight recommends using transparent lenses, which will optimize the light output. Although these lamps can be operated at a lower voltage, which will increase the life, the intensity will be reduced. Operation of the based LED at a higher voltage should not exceed 10% above the recommended voltage. Dialight does not recommend that based LED lamps be used in neon sockets. Dialight reserves the right to make changes at any time in order to supply the best product possible. Dialight Corporation 1501 Route 34 South • Farmingdale, NJ 07727 USA Tel: (1) 732-919-3119 • Fax: (1) 732-751-5778 • www.dialight.com MDEL586K001_C 586 Series BASED LED T3 1/4 WEDGE (T10) T3 1/4 WEDGE NON-POLARIZED PART NUMBER 586-2201-201F 586-2202-201F 586-2203-201F 586-2205-201F 586-2206-201F 586-2201-202F 586-2202-202F 586-2203-202F 586-2205-202F 586-2206-202F 586-220A-202F 586-220B-202F 586-2201-203F 586-2202-203F 586-2203-203F 586-2205-203F 586-2206-203F 586-220A-203F 586-220B-203F 586-2201-204F 586-2202-204F 586-2203-204F 586-2205-204F 586-2206-204F 586-220A-204F 586-220B-204F COLOR Red Green Yellow Blue White Red Green Yellow Blue White White/Yellow White/Orange Red Green Yellow Blue White White/Yellow White/Orange Red Green Yellow Blue White White/Yellow White/Orange PEAK WAVELENGTH (nm) 615 528 591 470 * 615 528 591 470 * * / 591 * / 610 615 528 591 470 * * / 591 * / 610 615 528 591 470 * * / 591 * / 610 VOLTAGE (VDC) 6 6 6 6 6 12 12 12 12 12 12 12 14 14 14 14 14 14 14 24 24 24 24 24 24 24 CURRENT TYP.-(mA) 69 30 69 30 30 37 19 37 19 19 25 25 41 24 41 24 24 25 25 19 12 19 12 12 14 14 INTENSITY TYP.-(mcd) 770 300 550 90 630 820 380 590 115 800 725 775 910 480 650 145 1000 725 775 850 480 610 145 1000 810 870 RoHS COMPLIANT Based LE Ds SELECTION With the technological advancements in Light Emitting Diodes (LEDs) brightness can now rival the incandescent lamp when used in similar packages. These advancements have created a new type of product called the based LED - an LED with the functionality of an incandescent bulb. The following styles are currently available in red, green, yellow, blue and white: T1 3/4 Midget Flange T1 3/4 Bi-Pin T1 3/4 Wedge (T5) T3 1/4 Miniature Bayonet (BA9s) T3 1/4 Miniature Screw (E10) T3 1/4 Wedge (T10) T2 Telephone Slide 15mm SC Bayonet (BA15s) Dialight’s line of based LEDs continues to grow. Please visit our website for more information. www.dialight.com Dialight reserves the right to make changes at any time in order to supply the best product possible. Dialight Corporation 1501 Route 34 South • Farmingdale, NJ 07727 USA Tel: (1) 732-919-3119 • Fax: (1) 732-751-5778 • www.dialight.com MDEL586K001_C