597-3201-4XX

3mm Round ® OptopipeTM Optical Light Pipe, 2 Array 3.56 [.140] 2 PLCS 1.78 [.070] 12.70 [.50] 6.35 [.250] C LED L C LED L 12.95 [.51] 515-1071 Recommended MicroLED SMT LEDs for use with 515-1071 PART NO. COLOR AlGaAs Red Orange Green Yellow 4.19 2.39 [.165] [.094] Ø 3.56 [.140] 2 PLCS Ø 2.01 [.079] TYP 2 PLCS 3.17 [.125] 6.35 [.250] 1.70 [.067] TYP 1.52 [.060] TYP 3.56 [.14] 4.32 [.17] 2 PAGE # 1-28 1-28 1-28 1-28 597-3111-4xx 597-3201-4xx 597-3311-4xx 597-3401-4xx 1.48 [.057] TYP NOTE: designed for post-reflow PC board insertion. 1.35 [.053] Ø .076 ±.002 TYP: 2 PLCS 6.35 ±.08 [.250 ±.003] 8.69 [.342] 2.34 [.092] DIRECTION OF LIGHT Dimensions in mm [inches] Features • Compatible with Dialight’s 515-1020 and 515-1069 Optopipe Light Pipe arrays • High transmissivity polycarbonate material • UL94V-0 compliance • ESD protection (circuit isolation from front panel) • Wide viewing angle • Arrays reduce insertion costs • Secures to PCB by press-fit LED Data For absolute maximum ratings and other electrical and optical data on the recommended LEDs, refer to LED data sheets. Operating/Storage Temperature –30°C to +100°C Dialight Optopipe Light Pipe Description This Optopipe’s™ circular light emitting surfaces appear bright and uniform in intensity. It is reliably held in place by 2 press-fit pins located on the right side of each of the 2 light pipe elements. This Optopipe™ functions as a through-thecase indicator with a textured finish on the 2 light emitting surface that increases its viewing angle. The recommended light sources are Dialight's 597 Series PLCC-2 or PLCC-4 Type SMT LEDs. The LEDs are mounted in a straight line on a 0.250" pitch. The light pipe material is water clear transmissive polycarbonate rated UL94-V0, and has a 35% oxygen index. Dialight can provide custom Optopipe™ solutions for your applications. Dialight Corporation • 1501 Route 34 South • Farmingdale, NJ 07727 • TEL: (732) 919-3119 • FAX: (732) 751-5778 •www.dialight.com 2-35