PWARC1WWSP

FEATURES / BENEFITS p Utilizes 9 premium flux LUXEON® Rebel™ LEDs, PWAR CIRCULAR LIGHT ENGINE MODULE PWAR/PWARD 100+ lumens for cool white, 100+ lumens for neutral white and 50+ lumens for warm white p Allows for custom heatsink or fixture design p ETL recognized to UL standards (pending) p Available in choice of colours & colour temperatures p Quick connect terminal blocks for easy installation p >70% lumen maintenance @ 50,000 hours at max operating temperature. Better at lower operating temps! APPLICATION MATERIALS / FINISH p Spot lighting p Architectural lighting p Casing - ADC10 Aluminium Alloy p Accent lighting p Machine vision p Finish - Anodised Satin Silver p General illumination p Display cases p Connection - Cage Clamp Connectors p Interior use only p Optics - Dialight-Lumidrives Optics All applications require additional heatsink. For factory fitted heatsink see AR111 / AR111-LV datasheet. ORDERING INFORMATION p Lens Cover - Polycarbonate 143R p Rear Cover - Polycarbonate 143R MECHANICAL DIMENSIONS PWARD-C1-AA-BB Typical Colour (AA) Temperature CW = 5000K – 6350K NW = 3800K – 4100K Options Blank = no onboard driver WW = 2850K – 3250K Optic (BB) D = with onboard driver SP = 7 degree spot WD = 13 degree wide All angles are half divergence Dialight Europe Ltd Exning Road • Newmarket • Suffolk, United Kingdom, CB8 0AX Tel :+44 (0)1638 666541 • www.dialight.com Diameter x H 61mm x 41.8mm (2.40” x 1.65”) Maximum Cable Dia - 1.5mm2 / 16 AWG Dialight Corporation 1501 Route 34 South • Farmingdale, NJ 07727 USA Tel: (1) 732-919-3119 • Fax: (1) 732-751-5778 • www.dialight.com MDEXLUMPWAR_A OPERATING CHARACTERISTICS Model / Color Typical Total Lumen Output 350mA / LV 700mA PWAR / CW 900 1620 PWAR / NW 900 1620 PWAR / WW 450 855 PWARD / CW 900 - PWARD / NW 900 - PWARD / WW 450 - Power Consumption Drive Current / Operating Current Input Voltage 350mA / LV 700mA mA 10.8W 21.6W 350 - 700 *30 -36VDC 11.0W - **1.0A - 500mA 12-24VDC 11-16VAC Note: Lumen output based on manufacturers data *Based on max Vf of 4.0V **1.2A for initial switch on OPERATING CONDITIONS p Max case temp = 85ºC @ 350mA p PWAR requires constant current driver PWARD requires constant voltage driver (See compatibility list) p Max drive current 700mA (constant current version) p Modules require additional heatsinking for lumen maintenance figures. p IP20 rating HEATSINK PERFORMANCE NOTE Any custom designed heatsink must maintain a maximum case temperature of 85ºC or less for the required working ambient temperature. COMPATIBLE DRIVERS Dialight Corporation Dialight Europe Ltd 1501 Route 34 South • Farmingdale, NJ 07727 USA Exning Road • Newmarket • Suffolk, United Kingdom, CB8 0AX Tel :+44 (0)1638 666541 • www.dialight.com Tel: (1) 732-919-3119 • Fax: (1) 732-751-5778 • www.dialight.com Datasheet subject to change without notice. Please visit www. dialight.com for updates. MDEXLUMPWAR_A