AH1803-SNG-7

AH1803 MICROPOWER, ULTRA-SENSITIVE HALL EFFECT SWITCH Please click here to visit our online spice models database. Features • • • • Micropower operation Operation with North or South Pole 2.4 to 5.5V battery operation Chopper Stabilized • Superior temperature stability • Extremely Low Switch-Point Drift • Insensitive to Physical Stress Good RF noise immunity -40°C to 85°C operating temperature Low profile 3 pin SC59 (commonly known as SOT23 in Asia) and DFN2020-6 package ESD (HBM) ＞ 4KV for DFN2020-6 SC59 (commonly known as SOT23 in Asia) and DFN2020-6: Available in “Green” Molding Compound (No Br, Sb) Lead Free Finish/ RoHS Compliant (Note 1) General Description AH1803 is with two Hall effect plates and a CMOS output driver, mainly designed for battery–operation, hand-held equipment (such as Cellular and Cordless Phone, PDA). The total operation power is down to 24uW in the 3V supply. Either North or South Pole of sufficient strength will turn the output on. The output will be turned off under no magnetic field. While the magnetic flux density (B) is larger than operate point (Bop), the output will be turned on (low), the output is held until B is lower than release point (Brp), then turned off (High). • • • • • • Applications • • • Cellular phone PDA Cordless phone Typical Circuit 2.4~5.5V C* AH1803 GND Output to strengthen * C is for power stabilization and10nF~100nF. the noise immunity, the recommended capacitance is AH1803 Rev. 9 DS31193 1 of 9 www.diodes.com OCTOBER 2009 © Diodes Incorporated AH1803 MICROPOWER, ULTRA-SENSITIVE HALL EFFECT SWITCH Ordering Information AH1803 - XX G - 7 Package W : SC59 SN : DFN2020-6 Product AH1803-WG-7 AH1803-SNG-7 Notes: Green G : Green Packing 7 : Tape & Reel Package Code W SN Packaging (Note 2) SC59 DFN2020-6 7” Tape and Reel Quantity Part Number Suffix 3000/Tape & Reel -7 3000/Tape & Reel -7 1. EU Directive 2002/95/EC (RoHS). All applicable RoHS exemptions applied. Please visit our website at http://www.diodes.com/products/lead_free.html. 2. Pad layout as shown on Diodes Inc. suggested pad layout document AP02001, which can be found on our website at http://www.diodes.com/datasheets/ap02001.pdf. Pin Assignments (1) SC59 (commonly known as SOT23 in Asia) (2) DFN2020-6 ( Top View ) ( Top View ) 2. Output GND 3. 1. Vdd 6. NC 5. GND 4. NC 1. Vdd Notes: 3. NC is “No Connection”, which is recommended to be tied to ground. 2. NC 3. Output Pin Descriptions Pin Name Vdd GND Output NC P/I/O P/I P/I O Description Power Supply Input Ground Output Pin No Connected AH1803 Rev. 9 DS31193 2 of 9 www.diodes.com OCTOBER 2009 © Diodes Incorporated AH1803 MICROPOWER, ULTRA-SENSITIVE HALL EFFECT SWITCH Block Diagram Vdd Power switch Offset Cancelling Hall Plate Amp Latch Logical Offset Cancelling Hall Plate Output Amp Latch GND Absolute Maximum Ratings Symbol Vdd B Ts PD TJ (at TA= 25°C) Characteristics Supply voltage Magnetic flux density Storage Temperature Range Package Power Dissipation Maximum Junction Temperature SC59 DFN2020-6 Values 7 Unlimited -65 to +150 230 230 150 Unit V °C mW mW °C Recommended Operating Conditions Symbol Vdd TA Parameter Supply Voltage Operating Temperature Range ( TA = 25°C ) Conditions Operating Operating Rating 2.4~5.5 -40 to +85 Unit V °C AH1803 Rev. 9 DS31193 3 of 9 www.diodes.com OCTOBER 2009 © Diodes Incorporated AH1803 MICROPOWER, ULTRA-SENSITIVE HALL EFFECT SWITCH Electrical Characteristics Symbol VOH VOL Idd(en) Characteristic (TA= +25°C, Vdd= 3V; unless otherwise specified) Conditions Min Typ. 3 3 5 5 8 8 75 75 0.1 Max 0.1 6 9 10 18 16 27 150 150 - Unit V V mA mA µA µA µA µA µs ms % Idd(dis) Idd(avg) Tawake Tperiod D.C. Notes: Output On Voltage (High side) IOUT = -1mA Vdd-0.2 Output On Voltage (Low side) IOUT = 1mA Chip enable, TA = 25°C, Vdd = 3V Chip enable, TA = -40~85°C, Vdd = 2.4~5.5V Chip disable, TA = 25°C, Vdd = 3V Supply Current Chip disable, TA = -40~85°C, Vdd = 2.4~5.5V Average supply current, TA = 25°C , Vdd = 3V Average supply current, TA = -40~85°C, Vdd = 2.4~5.5V Awake Time (Note 5) Period (Note 5) Duty Cycle - 5. When power is initially on, the operating Vdd (2.4V to 5.5V) must be applied to be guaranteed for the output sampling. The output state is valid after the second operating phase (typical 150ms). Tperiod Tawake Idd(en) Idd (dis) 0 Sample and output latched AH1803 Rev. 9 DS31193 4 of 9 www.diodes.com OCTOBER 2009 © Diodes Incorporated AH1803 MICROPOWER, ULTRA-SENSITIVE HALL EFFECT SWITCH Magnetic Characteristics Symbol Bops(south pole to brand side) Bopn(north pole to brand side) Brps(south pole to brand side) Brpn(north pole to brand side) Bhy( Bopx − Brpx ) Notes: (TA = 25°C, Vdd = 3V, Note 6, 7) (1mT = 10G) Max Unit 4 -2 -1 - Parameter Operation Point Release Point Hysteresis Min 2 -4 1 0.5 Typ. 3 -3 2 -2 1 mT 6. Typical data is at TA=25 °C, Vdd=3V, and for design information only. 7. Magnetic characteristics are for design information, which will vary with supply voltage, operating temperature and after soldering. Output ( Output Voltage ) ( Output Voltage ) Output Vcc ( off-state ) Turn off Turn on ( off-state ) Vcc Bhy Turn off Bhy Turn on ( on-state ) Vsat Bopn Brpn 0 ( Magnetic flux density B ) Vsat ( on-state ) 0 Brps Bops ( Magnetic flux density B ) Performance Characteristics (1) SC59 (commonly known as SOT23 in Asia) and DFN2020-6 25 50 60 70 80 85 90 100 TA (°C) 230 P D (m W ) 300 110 74 120 55 130 37 140 18 150 0 PD (mW) 184 166 147 129 120 110 92 P o w e r D is s i p a tio n C u rv e 200 100 0 0 -4 0 25 50 75 85 100 12 5 150 o TA ( C) AH1803 Rev. 9 DS31193 5 of 9 www.diodes.com OCTOBER 2009 © Diodes Incorporated AH1803 MICROPOWER, ULTRA-SENSITIVE HALL EFFECT SWITCH Marking Information (1) SC59 (commonly known as SOT23 in Asia) ( Top View ) XX Y W X XX : Identification code Y : Year 0~9 W : Week : A~Z : 1~26 week; a~z : 27~52 week; z represents 52 and 53 week X : A~Z : Green Part Number AH1803 Package SC59 Identification Code KD (2) DFN2020-6 ( Top View ) XX Y WX Pin 1 indicator XX : Identification Code Y : Year : 0~9 W : Week : A~Z : 1~26 week; a~z : 27~52 week; z represents 52 and 53 week X : A~Z : Green Package DFN2020-6 Identification Code KD Part Number AH1803 AH1803 Rev. 9 DS31193 6 of 9 www.diodes.com OCTOBER 2009 © Diodes Incorporated AH1803 MICROPOWER, ULTRA-SENSITIVE HALL EFFECT SWITCH Package Information (All Dimensions in mm) (1) Package Type: SC59 (commonly known as SOT23 in Asia) 0.35/0.50 TOP VIEW 1.50/ 1.70 2.70/ 3.00 1.90 2.90/3.10 1.00/ 1.30 0.10/0.20 0.013/0.10 0.95 0.35/0.55 0 O /8 O (2) Package Type: DFN2020-6 0.57/0.63 Marking 0.15max. 0.05 C 0.08 C 0.43mon. (Active area depth) Seating plane C 2x Pin#1 ID B 0/0.05 0.15 C 1.95/2.075 1.45/1.65 A Sensor location 1.95/2.075 0.97/1.04 C L 2x- 0.15 C 0.30/0.40 0.65nom. 0.97/1.04 C L 0.76/0.96 0.2/0.3 0.05 M C A B Bottom View AH1803 Rev. 9 DS31193 7 of 9 www.diodes.com OCTOBER 2009 © Diodes Incorporated AH1803 MICROPOWER, ULTRA-SENSITIVE HALL EFFECT SWITCH Taping Orientation For DFN2020-6 Notes: 8. The taping orientation of the other package type can be found on our website at http://www.diodes.com/datasheets/ap02007.pdf. AH1803 Rev. 9 DS31193 8 of 9 www.diodes.com OCTOBER 2009 © Diodes Incorporated AH1803 MICROPOWER, ULTRA-SENSITIVE HALL EFFECT SWITCH IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright © 2009, Diodes Incorporated www.diodes.com AH1803 Rev. 9 DS31193 9 of 9 www.diodes.com OCTOBER 2009 © Diodes Incorporated