AP1086
1.5A LOW DROPOUT POSITIVE ADJUSTABLE OR FIXED-MODE REGULATOR Description
AP1086 is a low dropout positive adjustable or fixed-mode regulator with 1.5A output current capability. The product is specifically designed to provide well-regulated supply for low voltage IC applications such as high-speed bus termination and low current 3.3V logic supply. AP1086 is also well suited for other applications such as VGA cards. AP1086 is guaranteed to have lower than 1.4V dropout at full load current making it ideal to provide well-regulated outputs of 1.25V to 5.0V with 4.7 to 12V input supply by different output voltage.
Pin Assignments
(Top View)
3 2 1 Tab is VOUT VIN VOUT Adj (GND)
TO252-3L
(Top View)
3 2 VIN VOUT Adj (GND)
Features
• • • • • • • • 3-Terminal Adjustable or Fixed 1.5V, 1.8V, 2.5V,3.3V, 5.0V 1.4V Maximum Dropout at Full Load Current Fast Transient Response Built-in Thermal Shutdown Output Current Limiting Lead Free Packages: TO252-3L, TO263-3L, TO220-3L TO252-3L, TO263-3L, and TO220-3L: Available in “Green” Molding Compound (No Br, Sb) Lead Free Finish/ RoHS Compliant (Note 1)
1 Tab is VOUT
TO263-3L
(Top View)
3 2 1 Tab is VOUT VIN VOUT Adj (GND)
TO220-3L
Notes: 1. EU Directive 2002/95/EC (RoHS). All applicable RoHS exemptions applied. Please visit our website at http://www.diodes.com/products/lead_free.html.
Typical Application Circuit
5V to 3.3V Fixed Mode Regulator
5V C1 100uF Vin Vout GND Tab is Vout 3.3V/1.5A C2 100uF Vin Vout Adj Tab is Vout R1 121 Ω R2 121 Ω 5V C1 100uF
Adjustable Regulator
VOUT=Vref × (1+R2/R1) 2.5V/1.5A C2 100uF
Note: Vo = V RE ∗
F
( R2 +) 1 R1
June 2010
© Diodes Incorporated
AP1086
Document number: DS31028 Rev. 6 - 2
1 of 10 www.diodes.com
AP1086
1.5A LOW DROPOUT POSITIVE ADJUSTABLE OR FIXED-MODE REGULATOR Pin Descriptions
Pin Name
Adj (GND) VOUT O
I/O
Pin #
1 2
Description
Adjustable (Ground only for fixed mode) The output of the regulator. A minimum of 10uF capacitor must be connected from this pin to ground to insure stability. The input pin of regulator. Typically a large storage capacitor is connected from this pin to ground to insure that the input voltage does not sag below the minimum dropout voltage during the load transient response. This pin must always be 1.4V higher than VOUT in order for the device to regulate properly.
VIN
I
3
Functional Block Diagram
VIN
3
2
VOUT
+ + CURRENT LIMIT + Thermal Shutdown 1 Adj 1.25V +
Absolute Maximum Ratings
Symbol VIN TST TMJ Parameter
DC Supply Voltage Storage Temperature Maximum Junction Temperature
Rating -0.3 to 12 -65 to +150 150
Unit V o C o C
Recommended Operating Conditions
Symbol Top Parameter Operating Junction Temperature Range Min
0
Max
125
Unit
o
C
AP1086
Document number: DS31028 Rev. 6 - 2
2 of 10 www.diodes.com
June 2010
© Diodes Incorporated
AP1086
1.5A LOW DROPOUT POSITIVE ADJUSTABLE OR FIXED-MODE REGULATOR Electrical Characteristics (Under Operating Conditions)
Parameter Reference Voltage AP1086-Adj AP1086-1.5 AP1086-1.8 Output Voltage AP1086-2.5 AP1086-3.3 AP1086-5.0 Line Regulation AP1086-XXX AP1086-Adj AP1086-1.5 AP1086-1.8 Load Regulation AP1086-2.5 AP1086-3.3 AP1086-5.0 Dropout Voltage (VIN-VOUT) Current Limit Minimum Load Current (Note 4) Thermal Regulation Ripple Rejection AP1086-Adj/-2.5/ -3.3/-3.6/-5.0 AP1086-Adj/-2.5/ -3.3/-3.6/-5.0 AP1086-XXX Conditions TA = 25 C, (VIN-VOUT)= 1.5V,IO = 10mA IOUT = 10mA, TA = 25 C, 3V≦VIN≦12V IOUT = 10mA, TA = 25 C, 3.3V≦VIN≦12V IOUT = 10mA, TA = 25οC, 4V≦VIN≦12V IOUT = 10mA, TA = 25οC, 4.8V≦VIN≦12V IOUT = 10mA, TA = 25 C, 6.5V≦VIN≦12V IO = 10mA, VOUT+1.5V
很抱歉,暂时无法提供与“AP1086TXXL-U”相匹配的价格&库存,您可以联系我们找货
免费人工找货