AP1122EL-13

厂商：
DIODES
封装：
描述：
AP1122EL-13 - 1A LOW DROPOUT POSITIVE REGULATOR - Diodes Incorporated

数据手册：

下载AP1122EL-13.pdf

立即购买

详情介绍
数据手册
价格&库存

AP1122EL-13 数据手册

AP1122 1A LOW DROPOUT POSITIVE REGULATOR Description AP1122 is a low dropout positive fixed-mode regulator with 1A output current capability. The product is specifically designed to provide well-regulated supply for low voltage IC applications such as high-speed bus termination and low current 1.2V logic supply. AP1122 is also well suited for other applications such as VGA cards. AP1122 is guaranteed to have lower than 1.3V dropout at full load current making it ideal to provide well-regulated outputs of 1.2 output voltage with 2.5V input voltage supply. Pin Assignments (Top View) 3 2 1 Tab is VOUT SOT223-3L VIN VOUT GND Applications • • PC peripheral Communication (Top View) 3 2 VIN VOUT GND Features 1 • • • • • • • • • 1.3V maximum dropout at full load current Fixed 1.2V± 2% output voltage Fast transient response Output current limiting Built-in thermal shutdown Good noise rejection Packages: SOT223-3L, TO252-3L, SOT89-3L, TO263-3L and TO220-3L SOT89-3L, SOT223-3L and TO252-3L: Available in “Green” Molding Compound (No Br, Sb) Lead Free Finish/ RoHS Compliant (Note 1) Tab is VOUT TO252-3L/ TO263-3L (Top View) 3 2 1 Tab is VOUT SOT89-3L ( Top View) VIN VOUT GND 3 2 1 Tab is VOUT TO220-3L Notes: 1. EU Directive 2002/95/EC (RoHS). All applicable RoHS exemptions applied. Please visit our website at http://www.diodes.com/products/lead_free.html. 1 of 11 www.diodes.com VIN VOUT GND AP1122 Document number: DS31012 Rev. 9 - 2 May 2010 © Diodes Incorporated AP1122 1A LOW DROPOUT POSITIVE REGULATOR Typical Application Circuit 2.5V C1 100uF VIN VOUT GND Tab is VOUT C2 100uF 1.2V/1A Pin Descriptions Pin Name GND VOUT I/O I O Pin # 1 2 Ground Pin The output of the regulator. A minimum of 10uF capacitor (0.15Ω ≤ ESR ≤ 20Ω) must be connected from this pin to ground to insure stability. The input pin of regulator. Typically a large storage capacitor is connected from this pin to ground to insure that the input voltage does not sag below the minimum dropout voltage during the load transient response. Description VIN I 3 Functional Block Diagram V IN 3 2 V OUT + + CURRENT LIMIT 1.2V + + Thermal Shutdown 1 GND AP1122 Document number: DS31012 Rev. 9 - 2 2 of 11 www.diodes.com May 2010 © Diodes Incorporated AP1122 1A LOW DROPOUT POSITIVE REGULATOR Absolute Maximum Ratings Symbol VIN TST TMJ Parameter DC Supply Voltage Storage Temperature Maximum Junction Temperature Rating -0.3 to 12 -65 to +150 150 Unit V o C o C Recommended Operating Conditions Symbol IOUT TOP Parameter Min 0 Max 1.0 125 Unit A o C Output Current Operating Junction Temperature Range Electrical Characteristics (Under Operating Conditions) Parameter Output Voltage Line Regulation Load Regulation Dropout Voltage (VIN-VOUT) Current Limit Minimum Load Current (Note 4) Thermal Regulation Ripple Rejection Temperature Stability Test Conditions 2.5V≦VIN≦12V, IO=10mA, TA=25 C 2.5V≦VIN≦12V, IO=10mA, TA=25oC VIN=2.5V~12V, 10mA

下载 PDF

AP1122EL-13

物料型号： - 型号：AP1122

器件简介： - AP1122是一款低 dropout 正固定模式调节器，具有1A的输出电流能力。该产品专为低电压IC应用提供良好调节的电源，例如高速总线终止和低电流1.2V逻辑电源。AP1122也适用于其他应用，如VGA卡。AP1122保证在满载电流下dropout低于1.3V，使其成为提供1.2V输出电压和2.5V输入电压供应的良好调节输出的理想选择。

引脚分配： - GND（1号引脚）：地线 - VOUT（2号引脚）：调节器的输出。必须在此引脚和地之间连接至少10uF的电容器（0.15Ω ≤ ESR ≤ 20Ω）以确保稳定性。 - VIN（3号引脚）：调节器的输入引脚。通常在此引脚和地之间连接一个大的储能电容器，以确保在负载瞬态响应期间输入电压不低于最小dropout电压。

参数特性： - 最大dropout电压：在满载电流下为1.3V - 固定1.2V±2%的输出电压 - 快速瞬态响应 - 输出电流限制 - 内置热保护 - 良好的噪声抑制

功能详解： - AP1122具有低dropout电压、固定输出电压、快速瞬态响应、输出电流限制、内置热保护和良好的噪声抑制等特点，适用于需要低电压稳定电源的应用。

应用信息： - 应用于PC周边通信领域。

封装信息： - 封装类型包括SOT223-3L、TO252-3L、SOT89-3L、TO263-3L和TO220-3L。 - SOT89-3L、SOT223-3L和TO252-3L提供“绿色”封装化合物（无溴、锑），符合无铅表面处理/RoHS合规（注1）。

AP1122EL-13 价格&库存

-> 查询更多价格&库存

很抱歉，暂时无法提供与“AP1122EL-13”相匹配的价格&库存，您可以联系我们找货

免费人工找货

搜索历史

AP1122EL-13

相关技术文章