AP1534S

AP1534 PWM CONTROL 2A STEP-DOWN CONVERTER Features • • • • • • • • • Input voltage: 4.4V to 18V Output voltage: 0.8V to VCC. Duty ratio: 0% to 99% PWM control Oscillation frequency: 300KHz typ. Current limit, Enable function Thermal Shutdown function Built-in internal SW P-channel MOS SOP-8L: Available in “Green” Molding Compound (no Br, Sb) Lead Free Finish/RoHS Compliant (Note 1) General Description AP1534 consists of step-down switching regulator with PWM control. These devices include a reference voltage source, oscillation circuit, error amplifier, internal PMOS. AP1534 provides low-ripple power, high efficiency, and excellent transient characteristics. The PWM control circuit is able to vary the duty ratio linearly from 0 up to 99%. This converter also contains an error amplifier circuit as well as a soft-start circuit that prevents overshoot at startup. An enable function, an over current protect function and a short circuit protect function are built inside, and when OCP or SCP happens, the operation frequency will be reduced from 300KHz to 50KHz. Also, an internal compensation block is built in to minimize external component count. With the addition of an internal P-channel Power MOS, a coil, capacitors, and a diode connected externally, these ICs can function as step-down switching regulators. They serve as ideal power supply units for portable devices when coupled with the SOP-8L mini-packages, providing such outstanding features as low current consumption. Since this converter can accommodate an input voltage up to 18V, it is also suitable for the operation via an AC adapter. Applications • • • • • • • • PC Motherboard LCD Monitor Graphic Card DVD-Video Player Telecom Equipment ADSL Modem Printer and other Peripheral Equipment Microprocessor Core Supply Ordering Information AP1534 X X X Package S : SOP-8L Note: Lead Free G : Green Packing -13 : Tape & Reel 13” Tape and Reel Part Number Suffix 2500/Tape & Reel -13 Quantity -U : Tube 1. RoHS revision 13.2.2003. Glass and High Temperature Solder Exemptions Applied, see EU Directive Annex Notes 5 and 7. Device AP1534S Note: Package Code S Packaging (Note 2) SOP-8L Quantity 100 Tube Part Number Suffix -U 2. Pad layout as shown on Diodes Inc. suggested pad layout document AP02001, which can be found on our website at http://www.diodes.com/datasheets/ap02001.pdf. AP1534 Rev. 2 1 of 8 www.diodes.com DECEMBER 2007 © Diodes Incorporated AP1534 PWM CONTROL 2A STEP-DOWN CONVERTER Pin Assignments FB 1 EN 2 AP1534 OCSET 3 VCC 4 SOP-8L 8 7 6 5 Vss Vss Output Output Pin Descriptions Pin Name FB Pin No. 1 Description Feedback pin Power-off pin H: Normal operation (Step-down operation) L: Step-down operation stopped (All circuits deactivated) Add an external resistor to set max output current IC power supply pin Switch Pin. Connect external inductor/diode here. Minimize trace area at this pin to reduce EMI GND Pin EN 2 OCSET VCC Output VSS 3 4 5, 6 7, 8 AP1534 Rev. 2 2 of 8 www.diodes.com DECEMBER 2007 © Diodes Incorporated AP1534 PWM CONTROL 2A STEP-DOWN CONVERTER Block Diagram Output Oscillation Circuit Vcc PWM-Switched Control Circuit Thermal Shutdown VEN 100uA Vss + Reference Voltage Source FB - EN OCSET Absolute Maximum Ratings Symbol Parameter Rating 4.5 150 VSS - 0.3 to VSS + 20 VSS - 0.3 to VCC VSS - 0.3 to VIN VSS - 0.3 to VIN Internally limited -20 to +125 -40 to +150 Unit KV V V V V V mW o o ESD HBM Human Body Model ESD Protection ESD MM VCC VFB VEN VOUT PD TJ TST Machine Model ESD Protection VCC Pin Voltage Feedback Pin Voltage EN Pin Voltage Switch Pin Voltage Power Dissipation Operating Junction Temperature Range Storage Temperature Range C C Caution: The absolute maximum ratings are rated values exceeding which the product could suffer physical damage. These values must therefore not be exceeded under any conditions. Recommended Operating Conditions Symbol VIN IOUT TA Parameter Input Voltage Output Current Operating Ambient Temperature Min 4.4 0 -25 Max 18 2 85 Unit V A o C AP1534 Rev. 2 3 of 8 www.diodes.com DECEMBER 2007 © Diodes Incorporated AP1534 PWM CONTROL 2A STEP-DOWN CONVERTER Electrical Characteristics Symbol Parameter VFB Feedback Voltage IFB Feedback Bias Current ISW Switch Current Current Consumption ISHDN During Power Off ∆VOUT Line Regulation / VIN ∆VOUT Load Regulation /VOUT fOSC Oscillation Frequency Frequency of Current Limit fOSC1 or Short Circuit Protect VIH EN Pin Input Voltage VIL EN Pin Input Leakage ISH Current ISL IOCSET OCSET Pin Bias Current RDS(ON) Internal MOSFET RDS(ON) EFFI TSHDN THYS θJA θJC Note: ( VIN = 12V, TA = 25°C, unless otherwise specified ) Conditions IOUT = 0.1A IOUT = 0.1A -VEN = 0V VIN = 5V~18V IOUT = 0.1 to 2A Measure waveform at SW pin Measure waveform at SW pin Evaluate oscillation at SW pin Evaluate oscillation stop at SW pin ---VIN = 5V, VFB = 0V VIN = 12V, VFB = 0V VIN = 12V, VOUT = 5V IOUT = 2A Min 0.784 2.0 240 2.0 75 Typ. 0.8 0.1 10 1 0.2 300 50 20 -10 90 160 100 91 150 55 127 28 Max 0.816 0.5 2 0.5 400 0.8 105 o Unit V µA A µA % % KHz KHz V µA µA µA mΩ % °C °C C/W C/W Efficiency Thermal shutdown threshold Thermal shutdown hysteresis Thermal Resistance SOP-8L (Note 3) Junction-to-Ambient Thermal Resistance SOP-8L (Note 3) Junction-to-Case o 3. Test condition for SOP-8L: Device mounted on FR-4 substrate PC board, 2oz copper, with minimum recommended pad layout. For better thermal performance, larger copper pad for heatsink is needed. Typical Application Circuit V IN R OCSET COCSET 5.6K Option CIN 470uF CVcc 0.1uF REN 100K CEN 0.1uF OCSET EN VSS Vcc 22uH L1 Output RA 6.8K V OUT =5V/2A AP1534 FB CC Optional + RB 1.3K C 0.1uF + D1 B240A (Note 4) - COUT 470uF Note: VOUT = VFB x (1+RA /RB ) RB =0.7K~5K ohm Note: 4. Suggested DIODES Power Schottky P/N: B240/B340 series. AP1534 Rev. 2 4 of 8 www.diodes.com DECEMBER 2007 © Diodes Incorporated AP1534 PWM CONTROL 2A STEP-DOWN CONVERTER Typical Performance Characteristics VIN vs Frequency 326 324 322 320 318 316 314 312 310 308 306 0 2 4 (VOUT=3.3V, IOUT=0.2A) 0.820 0.815 0.810 0.805 0.800 0.795 0.790 0.785 0.780 0 2 4 VIN vs VFB (VOUT=3.3V, IOUT=0.2A) FOSC (kHz) VFB (V) 6 8 10 VIN (V) 12 14 16 18 6 8 10 VIN (V) 12 14 16 18 Line Regulation 3.0% VOUT CHANGE (%) Load Regulation 1.0% 0.8% 0.6% 0.4% 0.2% 0.0% -0.2% -0.4% -0.6% -0.8% -1.0% 0.0 (VIN=5V, VOUT=3.3V) (VOUT=3.3V, IOUT=0.2A) VOUT CHANGE (%) 2.0% 1.0% 0.0% -1.0% -2.0% -3.0% 0 2 4 6 8 10 VIN (V) 12 14 16 18 0.5 1.0 IOUT (A) 1.5 2.0 100 90 80 70 60 50 40 30 20 10 0 0.0 0.5 Efficiency Efficiency (%) VOUT=3.3V VOUT=5V 1.0 IOUT (A) 1.5 2.0 AP1534 Rev. 2 5 of 8 www.diodes.com DECEMBER 2007 © Diodes Incorporated AP1534 PWM CONTROL 2A STEP-DOWN CONVERTER Typical Performance Characteristics Vout Ripple (Vin=5V, Vout=3.3V, Iout=0.1A) (Continued) Vout Ripple (Vin=5V, Vout=3.3V, Iout=2A) Test Circuit Oscillation open VCC OUTPUT FB open A VCC OUTPUT FB OCSET A + EN VSS - OCSET EN VSS Enable function test Feedback function test VCC + - OUTPUT FB OCSET EN VSS + V Operation function test AP1534 Rev. 2 6 of 8 www.diodes.com DECEMBER 2007 © Diodes Incorporated AP1534 PWM CONTROL 2A STEP-DOWN CONVERTER Function Description PWM Control The AP1534 is a DC/DC converter that employs pulse width modulation (PWM) scheme. Its pulse width varies in the range of 0% to 99%, based on the output current loading. The output ripple voltage caused by the PWM high frequency switching can easily be reduced through an output filter. Therefore, this converter provides a low ripple output supply over a broad range of input voltage & output current loading Under Voltage Lockout The under voltage lockout circuit of the AP1534 assures that the high-side MOSFET driver remains in the off state whenever the supply voltage drops below 3.3V. Normal operation resumes once VCC rises above 3.5V. Current Limit Protection The current limit threshold is set by external resistor ROCSET connected from VCC supply to OCSET pin. The internal sink current IOCSET (90uA typical) across this resistor sets the voltage at OCSET pin. When the PWM voltage is less than the voltage at OCSET, an over-current condition is triggered. The current limit threshold is given by the following equation: IPEAK × RDS(ON) = IOCSET × R OCSET ( ΔI) IPEAK > IOUT (MAX) + 2 where, ΔI = VIN − VOUT FSxL x VOUT VIN IPEAK is the output peak current; RDS (ON) is the MOSFET ON resistance; FS is the PWM frequency (300KHz typical). Also, the inductor value will affect the ripple current ΔI. The above equation is recommended for input voltage range of 5V to 18V. For input voltage lower than 5V, higher than 18V or ambient temperature over 100°C, ROCSET≧6.8KΩ is recommended. The recommended minimum ROCSET value is summarized below: VIN (V) VOUT (V) ROCSET (Ω) 4 1 6.8K 5 3.3 5.6K 12 5 3.9K 18 12 4.7K The maximum ROCSET value should not exceed AP1533 maximum current output. Marking Information ( Top View ) 8 5 Logo Part No. AP1534 YY WW X X 1 4 G : Green Internal code Xth week: 01~52 Year : "07" = 2007 "08" = 2008 ~ SOP-8L AP1534 Rev. 2 7 of 8 www.diodes.com DECEMBER 2007 © Diodes Incorporated AP1534 PWM CONTROL 2A STEP-DOWN CONVERTER Package Information (All Dimensions in mm) 5.79/6.20 3.70/4.10 0.08/0.25 0.254 Gauge Plane Seating Plane 0.38/1.27 Detail "A" 7°~9° 1.30/1.50 1.75max. 0.20typ 0.35max.45° 7°~9° Detail "A" 3.70/4.10 1.27typ 4.80/5.30 0.3/0.5 0.78 8x-0.60 5.4 6x-1.27 8x-1.55 Land Pattern Recommendation (Unit: mm) IMPORTANT NOTICE Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to any product herein. Diodes Incorporated does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on our website, harmless against all damages. LIFE SUPPORT Diodes Incorporated products are not authorized for use as critical components in life support devices or systems without the expressed written approval of the President of Diodes Incorporated. AP1534 Rev. 2 8 of 8 www.diodes.com DECEMBER 2007 © Diodes Incorporated