AP78L12SL-13

AP78L12 12V OUTPUT 3-TERMINAL POSITIVE REGULATORS Features • • • • • • • • • • 12.0V output voltage with tolerances of ±5% over the temperature range Output current in excess of 100mA Internal thermal overload protection Output transistor safe area protection Internal short circuit current limiting No external components Available in plastic TO92-3L and plastic SOP-8L low profile packages Lead-free Package: TO92-3L (Note 1) SOP-8L: Available in “Green” Molding Compound (No Br, Sb) (Note 2) Lead Free Finish / RoHS Compliant (Note 3) General Description The AP78L12 of three terminal positive regulators is available with fixed output voltages making them useful in a wide range of applications. These regulators can provide local on card regulation, eliminating the distribution problems associated with single point regulation. The voltages available allow the AP78L12 to be used in logic system, instrumentation, HiFi, and other solid state electronic equipment. The AP78L12 is available in the plastic TO92-3L package, the plastic SOP-8L package using industrial standard package technology. With adequate heat sinking the regulator can deliver 100mA output current. Current limiting is included to limit the peak output current to a safe value. Safe area protection for the output transistors is provided to limit internal power dissipation. If internal power dissipation becomes too high for the heat sinking provided, the thermal shutdown circuit takes over preventing the IC from overheating. Applications Well suited for a wide range of applications, such as: • • • • Lighting Ballast STB Power supply Audio Equipment Ordering Information AP 78 L 12 X X X Package V : TO92-3L S : SOP-8L Lead Free L : Lead Free (Note 1) G : Green (Note 2) Packing -A : Ammo Box -13 : Taping Note: 1. TO92-3L is available in “Lead Free” only. 2. SOP-8L is available in “Green” only. 3. RoHS revision 13.2.2003. Glass and High Temperature Solder Exemptions Applied, see EU Directive Annex Notes 5 and 7. Device AP78L12V AP78L12S Note: Package Packaging Code (Note 4) V S TO92-3L SOP-8L Lead-free Ammo Box / Tube Part Number Quantity Suffix 2000/Box -A NA NA 13” Tape and Reel Part Number Quantity Suffix NA NA 2500/Tape & Reel -13 4. Pad layout as shown on Diodes Inc. suggested pad layout document AP02001, which can be on our website at http://www.diodes.com/datasheets/ap02001.pdf. AP78L12 Rev. 1 1 of 9 www.diodes.com APRIL 2007 © Diodes Incorporated AP78L12 12.0V OUTPUT 3-TERMINAL POSITIVE REGULATORS Pin Assignments (1) TO92-3L (Bottom View) V OUT GND VIN TO92-3L (2) SOP-8L (Top View) VOUT GND GND NC 1 2 3 4 78L12 8 7 6 5 VIN GND GND NC SOP-8L AP78L12 Rev. 1 2 of 9 www.diodes.com APRIL 2007 © Diodes Incorporated AP78L12 12.0V OUTPUT 3-TERMINAL POSITIVE REGULATORS Pin Descriptions Name VIN VOUT GND NC Description Operating Voltage Input Voltage Output Pin Ground No Connection Absolute Maximum Ratings Symbol VCC VOUT TST TOP TMJ Parameter Supply Voltage Output Voltage to Ground Storage Temperature Operating Junction Temperature Maximum Junction Temperature Rating +30 12 -65 to +150 -20 to 125 150 Unit V V o o o C C C AP78L12 Rev. 1 3 of 9 www.diodes.com APRIL 2007 © Diodes Incorporated AP78L12 12.0V OUTPUT 3-TERMINAL POSITIVE REGULATORS Electrical Characteristics (All Output Voltage Versions) Limits in standard typeface are for TA=25℃, Bold typeface applies over -20℃to 125℃ for SOP-8L and TO-92 Packages. Unless otherwise specified: VIN=19V, IO=40mA, CI=0.33µF, CO=0.1µF. Symbol Parameter Conditions Min. 11.5 Typ. 12 Max. 12.5 12.6 Unit VO Output Voltage ∆VO ∆VO IQ ∆IQ Vn Line Regulation Load Regulation Quiescent Current Quiescent Current Change Output Noise Voltage 14.5V≤VIN≤27V 1mA≤IO≤40mA 1mA≤IO≤70mA 14.5V≤VIN≤27V 16V≤VIN≤27V 1mA≤IO≤100mA 1mA≤IO≤40mA 16V≤VIN≤27V 1mA≤IO≤40mA 11.4 11.4 30 20 30 10 3 V 12.6 180 110 100 50 5 1 0.1 mV mV mA µV dB mA mV/ oC 80 f=120Hz 15V≤VIN≤25V 40 54 140 IO=5mA -1.0 ∆VIN/∆VOUT Ripple Rejection IPK ∆VO/∆T Peak Output Current Average Output Voltage Tempco Minimum Value of Input Voltage Required to Maintain Line Regulation Thermal Resistance Junction to Ambient Thermal Resistance Junction to case VIN(Min) 13.7 TO92-3L (Note 5) SOP-8L (Note 6) TO92-3L (Note 5) SOP-8L (Note 6) 176 152 33 7 14.5 V θJA θJC Note: o C/W 5. Test conditions for TO92-3L: No heat sink, no air flow. 6. Test conditions for SOP-8L, TO92-3L: Device mounted on 2 oz. copper, minimum recommended pad layout, FB-4 PCB. AP78L12 Rev. 1 4 of 9 www.diodes.com APRIL 2007 © Diodes Incorporated AP78L12 12.0V OUTPUT 3-TERMINAL POSITIVE REGULATORS Typical Performance Characteristics Peak Output Current 300 △ VOUT=100mV OUTPUT CURRENT(mA) 250 200 TA=25℃ 150 100 50 0 14 18 22 26 30 INPUT-OUTPUT DIFFERENTIAL(V) 3.2 3.1 Quiescent Current INPUT-OUTPUT DIFFERENTIAL(V) Quiescent Current 2.960 TA=-25℃ Quiescent Current(mA) 2.955 2.950 2.945 2.940 2.935 2.930 10 15 20 25 30 INPUT VOLTAGE(V) 2.1 1.9 1.7 1.5 1.3 1.1 0.9 0.7 0.5 -25 Droput Conditions △ V OUT=2% of VOUT I OUT=40m A I OUT=1mA I OUT=70mA DROPOUT VOLTAGE TA=125℃ VOUT=12V I OUT=40mA TA=25℃ Quiescent Current(mA) 3.0 2.9 2.8 2.7 2.6 2.5 -25 VIN =19V VOUT=12V I OUT=40mA 0 25 50 75 100 125 JUNCTION TEMPERATURE(℃ ) 0 25 50 75 100 125 JUNCTION TEM PERATURE( ℃ ) AP78L12 Rev. 1 5 of 9 www.diodes.com APRIL 2007 © Diodes Incorporated AP78L12 12.0V OUTPUT 3-TERMINAL POSITIVE REGULATORS Typical Application Circuit Fixed Output regulator INPUT IN OUT AP78L12 GND C2 0.1uF OUTPUT C1* 0.33uF ★：Required if the regulator is located more than 3" from the power supply filter. Function Description Introduction The AP78L12 fixed-mode 12V output voltage regulator is a three terminal device. The AP78L12 fixed voltage regulator series has built-in thermal overload protection which prevents the device from being damaged due to excessive junction temperature. The regulators also contain internal short-circuit protection which limits the maximum output current, and safe-area protection for the pass transistor which reduces the short-circuit current as the voltage across the pass transistor is increased. AP78L12 Rev. 1 6 of 9 www.diodes.com APRIL 2007 © Diodes Incorporated AP78L12 12.0V OUTPUT 3-TERMINAL POSITIVE REGULATORS Marking Information (1) TO92-3L (Top View) Part Number L:Lead Free Package AP78L12 Y WW X X 1 2 3 Internal code Xth Week: 01~52 Year: "1"=2001 "2"=2002 TO92-3L (2) SOP-8L (Top View) 8 Logo Part Number 5 AP78L12 G : Green Package YY WW X X Internal code Xth week: 01~52 Year: "01" =2001 "02" =2002 ~ 1 SOP-8L 4 Device AP78L12S Package SOP8 Identification Code AP78L12 AP78L12 Rev. 1 7 of 9 www.diodes.com APRIL 2007 © Diodes Incorporated AP78L12 12.0V OUTPUT 3-TERMINAL POSITIVE REGULATORS Package Information (1) Package Type: TO92-3L (unit: mm) TO92-3L for Ammo pack AP78L12 Rev. 1 8 of 9 www.diodes.com APRIL 2007 © Diodes Incorporated AP78L12 12.0V OUTPUT 3-TERMINAL POSITIVE REGULATORS Package Information (2) Package Type: SOP-8L (Continued) 3.70/4.10 5.79/6.20 0.08/0.25 0.254 0.38/1.27 Gauge Plane Seating Plane Detail "A" 7°~9° 1.30/1.50 1.75max. 0.20typ 7°~9° 0.35max. 45° Detail "A" 3.70/4.10 1.27typ 4.80/5.30 0.3/0.5 IMPORTANT NOTICE Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to any product herein. Diodes Incorporated does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on our website, harmless against all damages. LIFE SUPPORT Diodes Incorporated products are not authorized for use as critical components in life support devices or systems without the expressed written approval of the President of Diodes Incorporated. AP78L12 Rev. 1 9 of 9 www.diodes.com APRIL 2007 © Diodes Incorporated