APX393M8G-13

APX393/APX339 LOW VOLTAGE RAIL-TO-RAIL INPUT DUAL/QUAD COMPARATORS Features • • • • • • • • Guaranteed 2.7V and 5V performance Industrial temperature range (-40°C to +85°C) Low supply current: 60 µA per Channel Input Common Mode Voltage (V-+0.2V to V+ -0.2V) Low output saturation voltage @ 200 mV Manufactured in standard CMOS process MSOP-8L, SOP-8L, and TSSOP-14L available in “Green” Molding Compound (No Br, Sb) Lead-free Finish / RoHS Compliant (Note 3) General Description The APX393/339 are low voltage (2.5V to 5.5V) dual and quad comparators. The APX393 is the dual version available in the 8-pin SOP and MSOP packages. The APX339 is the quad version available in 14-pin TSSOP package. The APX393/339 are designed to efficiently minimize cost, space, and power consumption for portable consumer products. They have open drain output to connect to the logic supply through a pull-up resistor and allow interfacing to a variety of logic families. Applications • • • • • Mobile communications Notebooks and PDA’s Battery powered electronics General purpose portable device General purpose low voltage applications Ordering Information APX 3XX XX G - 13 Part Number 93 : Dual (Note 1) 39 : Quad (Note 2) Package M8 : MSOP-8L S : SOP-8L TS : TSSOP-14L Packaging (Note 4) MSOP-8L SOP-8L TSSOP-14L Green G : Green Packing 13 : Tape & Reel Device APX393M8G-13 APX393SG-13 APX339TSG-13 Notes: Package Code M8 S TS 13” Tape and Reel Quantity Part Number Suffix 2500/Tape & Reel -13 2500/Tape & Reel -13 2500/Tape & Reel -13 1. APX393 is only available for MSOP-8L and SOP-8L. 2. APX339 is only available for TSSOP-14L. 3. EU Directive 2002/95/EC (RoHS). All applicable RoHS exemptions applied. Please visit our website at http://www.diodes.com/products/lead_free.html 4. Pad layout as shown on Diodes Inc. suggested pad layout document AP02001, which can be found on our website at http://www.diodes.com/datasheets/ap02001.pdf. APX393/APX339 Rev. 5 1 of 8 www.diodes.com FEBRUARY2008 © Diodes Incorporated APX393/APX339 LOW VOLTAGE RAIL-TO-RAIL INPUT DUAL/QUAD COMPARATORS Pin Assignments ( Top View ) OUTB 1 2 3 4 5 6 7 . ( Top View ) 14 OUTC 13 OUTD D A + C B + + + OUTA INAINA+ V- 1 2 3 4 A + B + - 8 7 6 5 V+ OUTB INBINB+ OUTA V INAINBINB+ + 12 V11 IND+ 10 IND9 8 INC+ INC- INA+ MSOP-8L / SOP-8L Absolute Maximum Ratings Symbol ESD HBM ESD MM (Note 5) TSSOP-14L Description Human Body Model Machine Model APX393 APX339 APX393 APX339 Rating 4000 3500 400 400 ±Supply Voltage 5.5 -65 to 150 150 Unit V V V V °C °C TST TJ Differential Input Voltage Voltage On Any Pin (Referred to V- Pin) Storage Temperature Maximum Junction Temperature Operating Ratings Symbol V -V TA Notes: + - (Note 5) Description Supply Voltage Operating Temperature Range Rating 2.5 to 5.5 -40 to +85 Unit V °C 5. Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for which the device is intended to be functional, but specific performance is not guaranteed. For guaranteed specifications and the test conditions, see the Electrical Characteristics. APX393/APX339 Rev. 5 2 of 8 www.diodes.com FEBRUARY2008 © Diodes Incorporated APX393/APX339 LOW VOLTAGE RAIL-TO-RAIL INPUT DUAL/QUAD COMPARATORS Electrical Characteristics 2.7V DC Electrical Characteristics Unless otherwise specified, all limits guaranteed for TA = 25°C, V+ = 2.7V, V- = 0V. Boldface limits apply at the temperature extremes. Min Typ. Max Symbol Parameter Test Conditions Unit (Note 7) (Note 6) (Note 7) VOS Input Offset Voltage 1.7 7 mV Input Offset Voltage TCVOS 5 µV/°C Average Drift 250 IB Input Bias Current 10 nA 400 50 IOS Input Offset Current 5 nA 150 0.2 V VCM Input Voltage Range 2.5 V VSAT Saturation Voltage ISINK ≤ 1mA 200 mV IO Output Sink Current VO ≤ 1.5V 5 20 mA APX393 150 180 µA Both Comparators IS Supply Current APX339 240 300 µA All four Comparators 1 Output Leakage Current 0.003 µA 2.7V AC Electrical Characteristics TA = 25°C, V+ = 2.7V, R L = 5.1 kΩ, V- = 0V. Symbol TPHL TPLH Parameter Propagation Delay (High to Low) Propagation Delay (Low to High) Test Conditions Input Overdrive = 10mV Input Overdrive = 100mV Input Overdrive = 10mV Input Overdrive = 100mV Min (Note 7) Typ. (Note 6) 700 150 500 200 Max (Note 7) Unit ns ns ns ns APX393/APX339 Rev. 5 3 of 8 www.diodes.com FEBRUARY2008 © Diodes Incorporated APX393/APX339 LOW VOLTAGE RAIL-TO-RAIL INPUT DUAL/QUAD COMPARATORS Electrical Characteristics (Continued) 5V DC Electrical Characteristics Unless otherwise specified, all limits guaranteed for TA = 25°C, V+ = 5V, V- = 0V. Boldface limits apply at the temperature extremes. Min Typ. Max Symbol Parameter Test Conditions Unit (Note 7) (Note 6) (Note 7) 1.7 7 VOS Input Offset Voltage mV 9 Input Offset Voltage TCVOS 5 µV/°C Average Drift 25 250 IB Input Bias Current nA 400 2 50 IOS Input Offset Current nA 150 0.2 V VCM Input Voltage Range 4.8 V AV Voltage Gain RL = 5.1 kΩ 20 50 V/mV 200 400 VSAT Saturation Voltage ISINK ≤ 4mA mV 700 IO (Sink) Output Sink Current VO ≤ 1.5V 10 60 mA APX393 150 180 µA 250 Both Comparators IS Supply Current APX339 240 300 µA 350 All four Comparators 1 Output Leakage Current .003 µA MSOP-8L (Note 8) 203 °C/W Thermal Resistance θJA SOP-8L (Note 8) 150 °C/W Junction-to -Ambient TSSOP-14L (Note 8) 100 °C/W 5V AC Electrical Characteristics + TA = 25°C, V = 5V, RL = 5.1 kΩ, V = 0V. Symbol TPHL TPLH Notes: Parameter Propagation Delay (High to Low) Propagation Delay (Low to High) Test Conditions Input Overdrive = 10mV Input Overdrive = 100mV Input Overdrive = 10mV Input Overdrive = 100mV Min (Note 7) Typ. (Note 6) 600 200 450 300 Max (Note 7) Unit ns ns ns ns 6. Typical values represent the most likely parametric norm as determined at the time of characterization. Actual typical values may vary over time and will also depend on the application and configuration. The typical values are not tested and are not guaranteed on shipped production material. 7. All limits are guaranteed by testing or statistical analysis. 8. All numbers are typical, and apply for packages soldered directly onto a PC board in still air. APX393/APX339 Rev. 5 4 of 8 www.diodes.com FEBRUARY2008 © Diodes Incorporated APX393/APX339 LOW VOLTAGE RAIL-TO-RAIL INPUT DUAL/QUAD COMPARATORS Typical Performance Characteristics Unless otherwise specified, Vs=+5V, single supply, TA=25oC Supply Current vs. Supply Voltage Output High Supply Current vs. Supply Voltage Output Low Output Voltage vs. Output Current (5V) Output Voltage vs. Output Current (2.7V) APX393/APX339 Rev. 5 5 of 8 www.diodes.com FEBRUARY2008 © Diodes Incorporated APX393/APX339 LOW VOLTAGE RAIL-TO-RAIL INPUT DUAL/QUAD COMPARATORS Marking Information (1) MSOP-8L ( Top View ) 8 Logo Part Number 7 6 5 A~Z : Green Y : Year : 0~9 W : Week : A~Z : 1~26 week; a~z : 27~52 week; z represents 52 and 53 week YWX APX393 1 2 3 4 (2) SOP-8L ( Top View ) 8 5 Logo Part Number APX393 YY WW X X 1 4 G : Green YY : Year : 08, 09,10~ WW : Week : 01~52; 52 represents 52 and 53 week X : Internal Code (3) TSSOP-14L ( Top View ) 14 8 Logo Part Number APX339 YY WW X X 1 7 G : Green YY : Year : 08, 09,10~ WW : Week : 01~52; 52 represents 52 and 53 week X : Internal Code APX393/APX339 Rev. 5 6 of 8 www.diodes.com FEBRUARY2008 © Diodes Incorporated APX393/APX339 LOW VOLTAGE RAIL-TO-RAIL INPUT DUAL/QUAD COMPARATORS Package Information (1) Package type: MSOP-8L ( All Dimensions in mm ) 8x-0.45 2.9/3.1 4.7/5.1 4.4 6x-0.65 1 0.75/0.95 0.65Bsc. 0.22/0.38 0.15Typ. 0.05/0.15 8x-1.4 Land Pattern Recommendation (Unit:mm) "A" 0/0.15 0.25 Gauge plane 0°/8 ° 0.254 0.62/0.82 Gauge Plane Seating Plane 0.05 2.9/3.1 0.4/0.8 DETAIL "A" 0.95Ref. (2) Package type: SOP-8L 3.85/3.95 5.90/6.10 0.10/0.20 Detail "A" 7°~9° 1.30/1.50 1.75max. 0.15/0.25 0.35max. 45° 7°~9° Detail "A" 0°/8° 1.27typ 4.85/4.95 0.3/0.5 8x-0.60 5.4 6x-1.27 8x-1.55 Land Pattern Recommendation (Unit: mm) APX393/APX339 Rev. 5 7 of 8 www.diodes.com FEBRUARY2008 © Diodes Incorporated APX393/APX339 LOW VOLTAGE RAIL-TO-RAIL INPUT DUAL/QUAD COMPARATORS Package Information (3) Package type: TSSOP-14L (Continued) IMPORTANT NOTICE Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to any product herein. Diodes Incorporated does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on our website, harmless against all damages. LIFE SUPPORT Diodes Incorporated products are not authorized for use as critical components in life support devices or systems without the expressed written approval of the President of Diodes Incorporated. APX393/APX339 Rev. 5 8 of 8 www.diodes.com FEBRUARY2008 © Diodes Incorporated