APX4558S-13

APX4558 DUAL CHANNEL LOW NOISE GENERAL PURPOSE OPERATIONAL AMPLIFIER Description The APX4558 device is a dual low noise operational amplifier. The wide bandwidth and low noise make it very suited to audio applications. The device is short-circuit protected, and the internal frequency compensation ensures stability without external components. Pin Assignments (Top View) 1OUT 1 1IN- 2 1IN+ 3 VCC- 4 SO-8 8 7 6 5 VCC+ 2OUT 2IN2IN+ N EW PRODUCT Features • • • • • • • • Unity-Gain Bandwidth . . . 3 MHz typical Gain and Phase match between amplifiers Low Noise . . . 8 nV/ Hz typical at 1 kHz Wide Common-Mode and Differential voltage ranges No frequency compensation required Low power consumption No latch-up Green mold compound (No Br, Sb) (Note 1) Applications • • Audio pre amps RCA line out buffers Notes: 1. EU Directive 2002/95/EC (RoHS). All applicable RoHS exemptions applied. Please visit our website at http://www.diodes.com/products/lead_free.html. Schematic Diagram Vcc+ Vcc+ IN- IN+ OUT Vcc- APX4558 Document number: DS35022 Rev. 4 - 2 1 of 10 www.diodes.com January 2011 © Diodes Incorporated APX4558 DUAL CHANNEL LOW NOISE GENERAL PURPOSE OPERATIONAL AMPLIFIER Pin Descriptions Pin # 1 2 3 4 5 6 Name 1OUT 1IN1IN+ VCC2IN+ 2IN2OUT VCC+ Amplifier 1 output Amplifier 1 inverting input Amplifier 1 non-inverting input Negative supply pin for amplifier 1 and amplifier 2 Amplifier 2 non-inverting input Amplifier 2 inverting input Amplifier 2 output Positive supply pin for amplifier 1 and amplifier 2. Description N EW PRODUCT 7 8 Absolute Maximum Ratings (Note 2) Symbol VCC+ VCCVID VI Parameter Supply voltage (Note 3) Differential input voltage (Note 4) Input voltage (any input) (Note 3, 5) Duration of output short circuit to ground, one amplifier at a time (Note 6) TJ TSTG Notes: Rating 18 -18 ±30 ±15 Unlimited 150 -65 to 150 Unit V V V Junction Temperature (Note 7) Storage Temperature °C °C 2. Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating Conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. 3. All voltage values, unless otherwise noted, are with respect to the midpoint between VCC+ and VCC–. 4. Differential voltages are at IN+ with respect to IN–. 5. The magnitude of the input voltage must never exceed the magnitude of the supply voltage or 15 V, whichever is less. 6. Temperature and/or supply voltages must be limited to ensure that the dissipation rating is not exceeded. 7. Maximum power dissipation is a function of TJ (max), θJA, and TA. The maximum allowable power dissipation at any allowable ambient temperature is PD = (TJ (max) – TA)/θJA. Operating at the absolute maximum TJ of 150°C can affect reliability. Recommended Operating Conditions Symbol VCC+ VCCTA Supply voltage (Note 3) Operating Ambient Temperature Range APX4558 APX4558I Parameter Min 5 -5 0 -40 Max 15 -15 70 105 Unit V °C APX4558 Document number: DS35022 Rev. 4 - 2 2 of 10 www.diodes.com January 2011 © Diodes Incorporated APX4558 DUAL CHANNEL LOW NOISE GENERAL PURPOSE OPERATIONAL AMPLIFIER Electrical Characteristics (VCC± = ±15V, TA = 25C, unless otherwise stated) Symbol AC Characteristics VIO IIO Input offset voltage Input offset current Input bias current Common-mode input voltage range RL = 10kΩ VOM Maximum output voltage swing RL = 2kΩ RL ≥ 2kΩ VO = ±10V VIN = VICR(Min) VCC± = ±15V to ±9V VO = 0V, No load VO = 0V VO = 0V VO = 0V 25°C Full temp 25°C Full temp 25°C Full temp 25°C 25°C 25°C Full temp 25°C Full temp 25°C 25°C 25°C 25°C ICC Supply current both amplifiers TA min TA max AC Characteristics B1 SR vn VO1/VO2 tr Unity-gain bandwidth Slew rate at unity gain Equivalent input noise voltage (closed loop) Crosstalk attenuation Rise time overshoot VI = ±10V, RL = 2kΩ, CL = 100pF G=100, RS = 100Ω F = 1kHz, BW = 1Hz Open loop G = 100 RS = 1kΩ f = 10kHz 25°C 25°C 25°C 25°C 25°C 25°C 25°C PD Total power dissipation both amplifiers VO = 0V, No load TA min TA max θJA θJC Notes: Parameter Conditions TA Min Typ. 0.5 5 150 Max 6 7.5 200 300 500 800 Unit mV nA nA V N EW PRODUCT IIB VICR ±12 ±12 ±10 ±10 20 15 0.3 70 76 ±14 ±14 ±13 300 5 90 90 2.5 3 2.3 3 5.6 6.6 5 V AVD RIN CMRR PSRR Large-signal differential voltage amplification Input resistance Common-mode rejection ratio Power supply rejection ratio V/mV MΩ dB dB mA MHz V/µs nV/ Hz dB µs % 170 200 150 °C/W °C/W mW 1.1 1.7 8 85 105 0.13 5 75 90 70 130 15 VI = 20mV, RL = 2kΩ, CL = 100pF Power and Thermal Characteristics Thermal Resistance Junction-toSO-8 (Note 8) Ambient Thermal Resistance Junction-toSO-8 Note 8) Case 8. Test condition for SO-8: Device mounted on FR-4 substrate PC board, with minimum recommended pad layout 9. Full temp is specified as 0 to 70°C for the APX4558 and -40 to 105°C for the APX48558I APX4558 Document number: DS35022 Rev. 4 - 2 3 of 10 www.diodes.com January 2011 © Diodes Incorporated APX4558 DUAL CHANNEL LOW NOISE GENERAL PURPOSE OPERATIONAL AMPLIFIER Typical Performance Characteristics SUPPLY CURRENT vs SUPPLY VOLTAGE (TA=25°C) 6 ICC – Supply Current – mA ICC – Supply Current – mA 6 5 4 3 2 1 0 SUPPLY CURRENT vs TEMPERATURE (VCC =±15V) 5 4 3 2 1 0 0 2 4 6 8 10 12 14 16 18 20 VCC – Supply Voltage – V N EW PRODUCT -50 -25 0 25 50 75 100 125 TA – Temperature – °C GAIN AND PHASE vs FREQUENCY (VCC =±15V, RL =2kΩ, CL =22pF) 40 30 20 0 -20 -40 Phase – deg -60 30 20 Gain – dB 40 GAIN AND PHASE vs FREQUENCY (VCC =±15V, RL =10kΩ, CL =22pF) 0 -20 -40 -60 Gain 10 -80 -100 -120 -140 -160 -180 -200 10000 Gain 10 -80 -100 -120 -140 -160 -180 -200 10000 Phase 0 -10 -20 100 Phase 0 -10 -20 100 1000 f – Frequency – kHz 1000 f – Frequency – kHz APX4558 Document number: DS35022 Rev. 4 - 2 4 of 10 www.diodes.com January 2011 © Diodes Incorporated Phase – deg Gain – dB APX4558 DUAL CHANNEL LOW NOISE GENERAL PURPOSE OPERATIONAL AMPLIFIER Typical Performance Characteristics (Continued) OUTPUT VOLTAGE SWING vs SUPPLY VOLTAGE (RL =2kΩ, TA=25°C) 15 VOM – Output Voltage Swing – V 10 5 0 -5 -10 -15 6 30 V OM – Output Voltage Swing – V 25 20 15 10 5 0 OUTPUT VOLTAGE SWING vs FREQUENCY (VCC =±15V, RL =2kΩ, TA=25°C) N EW PRODUCT 8 10 12 14 16 VCC – Supply Voltage – V 18 1 10 100 1k 10k f – Frequency – Hz 100k 1M VOM – O utput Voltage Swing – V 30 28 26 24 22 20 18 16 14 12 100 1000 RL – Load Resistance – Ω 10000 VOM – O utput Voltage Swing – V 32 OUTPUT VOLTAGE SWING vs LOAD RESISTANCE (VCC =±15V, TA=25°C) 15 14 13 12 11 10 -50 -25 OUTPUT VOLTAGE SWING vs TEMPERATURE (VCC =±15V, RL =10kΩ) 0 25 50 75 TA – Temperature – °C 100 125 APX4558 Document number: DS35022 Rev. 4 - 2 5 of 10 www.diodes.com January 2011 © Diodes Incorporated APX4558 DUAL CHANNEL LOW NOISE GENERAL PURPOSE OPERATIONAL AMPLIFIER Typical Performance Characteristics (Continued) NEGATIVE OUTPUT VOLTAGE SWING vs TEMPERATURE (VCC =±15V, RL =10kΩ) OPEN LOOP GAIN vs FREQUENCY (VCC =±15V, RL =2kΩ, CL =22pF, TA=25°C) 120 110 100 90 80 70 60 50 40 30 20 10 0 100 1k 10k 100k f – Frequency – Hz 1M 10M –VOM – Output Voltage Swing – V -10 -11 -12 -13 -14 -15 -50 N EW PRODUCT -25 0 25 50 75 T A – T emperature – °C 100 125 INPUT BIAS CURRENT vs TEMPERATURE (VCC =±15V) 120 IIB – Input Bias Current – nA 100 80 60 40 20 0 -50 -25 0 25 50 75 100 125 TA – Temperature – °C VIO – I nput Offset Voltage – V GM – Open Loop Gain – dB INPUT OFFSET VOLTAGE vs TEMPERATURE (VCC =±15V) 0.003 0.002 0.001 0 -0.001 -0.002 -0.003 -50 -25 0 25 50 75 TA – Temperature – °C 100 125 APX4558 Document number: DS35022 Rev. 4 - 2 6 of 10 www.diodes.com January 2011 © Diodes Incorporated APX4558 DUAL CHANNEL LOW NOISE GENERAL PURPOSE OPERATIONAL AMPLIFIER Typical Performance Characteristics (Continued) INPUT NOISE VOLTAGE vs FREQUENCY (VCC= ±15V TA= 25ºC) 20.0 VN - Input Noise Voltage (nV/√Hz) 18.0 16.0 14.0 12.0 10.0 8.0 6.0 4.0 2.0 0.0 100 1k 10k 100k N EW PRODUCT f - Frequency (Hz) APX4558 Document number: DS35022 Rev. 4 - 2 7 of 10 www.diodes.com January 2011 © Diodes Incorporated APX4558 DUAL CHANNEL LOW NOISE GENERAL PURPOSE OPERATIONAL AMPLIFIER Ordering Information APX4558x S - 13 Operating temperature range None: 0 to 70°C I: -40 to 105°C Device APX4558S-13 APX4558IS-13 Notes: Package S: SO-8 Packing 13: Tape and Reel N EW PRODUCT Package Code S S Packaging (Note 10) SO-8 SO-8 13” Tape and Reel Quantity 2500/Tape & Reel 2500/Tape & Reel Part Number Suffix -13 -13 10. Pad layout as shown on Diodes Inc. suggested pad layout document AP02001, which can be found on our website at http://www.diodes.com/datasheets/ap02001.pdf. Marking Information SO-8 (Top (Top View) 8 5 Logo Part Number APX4558x YY WW X X 1 4 X : A~Z : Internal code YY : Year : 08, 09,10~ WW : Week : 01~52; 52 represents 52 and 53 week X : Internal Code APX4558 Document number: DS35022 Rev. 4 - 2 8 of 10 www.diodes.com January 2011 © Diodes Incorporated APX4558 DUAL CHANNEL LOW NOISE GENERAL PURPOSE OPERATIONAL AMPLIFIER Package Outline Dimensions (All Dimensions in mm) SO-8 3.85/3.95 5.90/6.10 0.10/0.20 0.254 0.62/0.82 Gauge Plane Seating Plane Detail "A" N EW PRODUCT 7°~9° 1.30/1.50 1.75max. 0.15/0.25 0.35max. 45° 7°~9° Detail "A" 0°/8° 1.27typ 4.85/4.95 0.3/0.5 8x-0.60 5.4 6x-1.27 8x-1.55 Land Pattern Recommendation (Unit: mm) APX4558 Document number: DS35022 Rev. 4 - 2 9 of 10 www.diodes.com January 2011 © Diodes Incorporated APX4558 DUAL CHANNEL LOW NOISE GENERAL PURPOSE OPERATIONAL AMPLIFIER IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. N EW PRODUCT Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright © 2011, Diodes Incorporated www.diodes.com APX4558 Document number: DS35022 Rev. 4 - 2 10 of 10 www.diodes.com January 2011 © Diodes Incorporated