BAT54LPS

BAT54LPS BAT54LPS 0.2A SURFACE MOUNT SCHOTTKY BARRIER DIODE Features • • • • • • • Low Forward Voltage Drop Fast Switching Ultra-Small Leadless Surface Mount Package PN Junction Guard Ring for Transient and ESD Protection Lead Free By Design/RoHS Compliant (Note 1) "Green" Device (Note 2) Qualified to AEC-Q101 Standards for High Reliability NEW P RODUCT PRO DUCT DFN1006H4-2 G H Dim A B A Min Max Typ 0.95 1.075 1.00 0.55 0.675 0.60 0.45 0.55 0.50 0.20 0.30 0.25 0.34 0 ⎯ 0.4 ⎯ 0.37 0.40 0.05 0.03 Mechanical Data • • • • • • • Case: DFN1006-2 Case Material: Molded Plastic, "Green" Molding Compound. UL Flammability Classification Rating 94V-0 Moisture sensitivity: Level 1 per J-STD-020C Terminal Connections: Cathode Dot Terminals: Finish NiPdAu over Copper leadframe. Solderable per MILSTD-202, Method 208 Marking Information: See Page 3 Ordering Information: See Page 3 Weight: 0.001 grams C D G C B R H N R 0.05 0.15 0.10 D N All Dimensions in mm Maximum Ratings @TA = 25°C unless otherwise specified Symbol VRRM VRWM VR IF IFRM IFSM Value 30 200 300 600 Unit V mA mA mA Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage Forward Continuous Current Repetitive Peak Forward Current Forward Surge Current @ t < 1.0s Thermal Characteristics Characteristic Power Dissipation (Note 4) Thermal Resistance, Junction to Ambient Air (Note 4) Operating and Storage Temperature Range Symbol Pd RθJA Tj, TSTG Value 250 400 -65 to +125 Unit mW °C/W °C Electrical Characteristics Characteristic Reverse Breakdown Voltage (Note 3) Forward Voltage Reverse Leakage Current (Note 3) Total Capacitance Reverse Recovery Time Notes: @TA = 25°C unless otherwise specified Symbol V(BR)R Min 30 ⎯ ⎯ ⎯ ⎯ Typ ⎯ ⎯ ⎯ 428 580 ⎯ ⎯ ⎯ Max ⎯ 320 400 500 650 2.0 10 5.0 Unit V mV μA pF ns Test Condition IR = 100μA IF = 1mA IF = 10mA IF = 30mA IF = 100mA VR = 25V VR = 1.0V, f = 1.0MHz IF = 10mA through IR = 10mA to IR = 1.0mA, RL = 100Ω VF IR CT trr 1. No purposefully added lead. 2. Diodes Inc.'s "Green" policy can be found on our website at http://www.diodes.com/products/lead_free/index.php. 3. Short duration pulse test used to minimize self-heating effect. 4. Part mounted on FR-4 PC board with recommended pad layout, which can be found on our website at http://www.diodes.com/datasheets/ap02001.pdf. DS30810 Rev. 2 - 2 1 of 3 www.diodes.com BAT54LPS © Diodes Incorporated IF, INSTANTANEOUS FORWARD CURRENT (mA) IR, INSTANTANEOUS REVERSE CURRENT (uA) 1,000 100,000 TA = 125°C 100 TA = 125°C TA = 75°C TA = 75°C N EW PRODUCT 1,000 10 TA = 25°C T A = 25°C 10 TA = -55°C 1 TA = -55°C 0.1 0 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig.1 Typical Forward Characteristics 0.1 0 5 10 15 20 25 VR, REVERSE VOLTAGE (V) 30 Fig. 2 Typical Reverse Characteristics 16 14 CT, TOTAL CAPACITANCE (pF) 12 10 8 6 4 2 0 f = 1MHz 0.3 IF(AV), AVERAGE FORWARD CURRENT (A) 0.25 0.2 0.15 Note 4 0.1 0.05 0.00 0 10 20 VR, REVERSE VOLTAGE (V) Fig. 3 Typical Total Capacitance 30 0 25 50 75 100 125 150 175 0.5 0.45 PF(av), AVERAGE FORWARD POWER DISSIPATION (W) 0.4 0.35 0.3 0.25 0.2 0.15 0.1 0.05 0 0 0.1 0.2 0.3 0.4 0.5 0.6 IF(av), AVERAGE FORWARD CURRENT (A) Fig. 5 Forward Power Dissipation TA, DERATED AMBIENT TEMPERATURE (C) 125 Note 4 100 75 50 25 0 0 10 15 20 25 VR, DC REVERSE VOLTAGE (V) Fig. 6 Operating Temperature Derating 5 30 DS30810 Rev. 2 - 2 2 of 3 www.diodes.com BAT54LPS © Diodes Incorporated Ordering Information Device BAT54LPS-7 Notes: 5. (Note 5) Packaging DFN1006H4-2 Shipping 3000/Tape & Reel For packaging details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf. N EW PRODUCT Marking Information L2 L2 = Product Type Marking Code, Dot Denotes Cathode Side IMPORTANT NOTICE Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to any product herein. Diodes Incorporated does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on our website, harmless against all damages. LIFE SUPPORT Diodes Incorporated products are not authorized for use as critical components in life support devices or systems without the expressed written approval of the President of Diodes Incorporated. DS30810 Rev. 2 - 2 3 of 3 www.diodes.com BAT54LPS © Diodes Incorporated