SPICE MODELS: GBJ15005 GBJ1501 GBJ1502 GBJ1504 GBJ1506 GBJ1508 GBJ1510
GBJ15005 - GBJ1510
15A GLASS PASSIVATED BRIDGE RECTIFIER Features
· · · · · · ·
Glass Passivated Die Construction High Case Dielectric Strength of 1500VRMS Low Reverse Leakage Current Surge Overload Rating to 240A Peak Ideal for Printed Circuit Board Applications UL Listed Under Recognized Component Index, File Number E94661 Lead Free Finish/RoHS Compliant (Note 4) Dim GBJ Min 29.70 19.70 17.00 3.80 7.30 9.80 2.00 0.90 2.30 4.40 3.40 3.10 2.50 0.60 10.80 Max 30.30 20.30 18.00 4.20 7.70 10.20 2.40 1.10 2.70 4.80 3.80 3.40 2.90 0.80 11.20 A B C D E G H I J K L
L K A M
B
_
J D H I C
S P R
N
Mechanical Data
· · · · · · · · · ·
Case: GBJ Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020C Terminals: Plated Leads, Solderable per MIL-STD-202, Method 208 e3 Lead Free Plating (Tin Finish). Polarity: Molded on Body Mounting: Through Hole for #6 Screw Mounting Torque: 5.0 in-lbs Maximum Marking: Type Number Weight: 6.6 grams (approximate)
3.0 X 45°
G
E
E
M N P R S
All Dimensions in mm
Maximum Ratings and Electrical Characteristics
Single phase, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Forward Rectified Output Current @ TC = 100°C Non-Repetitive Peak Forward Surge Current, 8.3 ms single half-sine-wave superimposed on rated load Forward Voltage (per element) Peak Reverse Current at Rated DC Blocking Voltage I2 t Rating for Fusing (t < 8.3ms) (Note 1) @ IF = 7.5A DC @ TC = 25°C @ TC = 125°C Symbol VRRM VRWM VR VR(RMS) IO IFSM VFM IR I2 t CT RqJC Tj, TSTG GBJ 15005 50 35
@ TA = 25°C unless otherwise specified
GBJ 1501 100 70
GBJ 1502 200 140
GBJ 1504 400 280 15 240 1.05 10 500 240 60 0.8 -65 to +150
GBJ 1506 600 420
GBJ 1508 800 560
GBJ 1510 1000 700
Unit V V A A V µA A2 s pF °C/W °C
Typical Total Capacitance per Element (Note 2) Typical Thermal Resistance, Junction to Case (Note 3) Operating and Storage Temperature Range
Notes: 1. 2. 3. 4.
Non-repetitive, for t > 1ms and < 8.3 ms. Measured at 1.0 MHz and applied reverse voltage of 4.0V DC. Thermal resistance from junction to case per element. Unit mounted on 300 x 300 x 1.6mm copper plate heat sink. RoHS revision 13.2.2003. Glass and High Temperature Solder Exemptions Applied, see EU Directive Annex Notes 5 and 7.
DS21219 Rev. 7 - 2
1 of 3 www.diodes.com
GBJ15005 - GBJ1510
ã Diodes Incorporated
IF, INSTANTANEOUS FORWARD CURRENT (A)
15
With heatsink
Resistive or inductive load
100
Tj = 25°C
IO, AVERAGE RECTIFIED CURRENT (A)
10
10
1.0
5.0
0.1
Without heatsink 0 0 120 80 TC, CASE TEMPERATURE (°C) Fig. 1 Forward Current Derating Curve 40 160
0.01 0 0.4 1.2 1.6 2.0 0.8 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics
IFSM, PEAK FORWARD SURGE CURRENT (A)
250
Single Half-Sine Wave
100
200
CT, TOTAL CAPACITANCE (pF)
10
100
Tj = 25°C
Tj = 25°C
0 1 10 100
1.0
f = 1 MHz
1.0
NUMBER OF CYCLES AT 60 Hz Fig. 3 Maximum Non-Repetitive Surge Current
1000
10 100 VR, REVERSE VOLTAGE (V) Fig. 4 Typical Total Capacitance, Per Element
Tj = 125°C
100
Tj = 100°C
10
1.0
Tj = 50°C
Tj = 25°C
0.1 0 20 40 60 80 100 120 PERCENT OF PEAK REVERSE VOLTAGE (%) Fig. 5 Typical Reverse Characteristics
DS21219 Rev. 7 - 2
2 of 3 www.diodes.com
GBJ15005 - GBJ1510
Ordering Information
Device GBJ15005-F GBJ1501-F GBJ1502-F GBJ1504-F GBJ1506-F GBJ1508-F GBJ1510-F
Notes:
(Note 5) Packaging GBJ GBJ GBJ GBJ GBJ GBJ GBJ Shipping 15/Tube 15/Tube 15/Tube 15/Tube 15/Tube 15/Tube 15/Tube
5. For packaging details, visit our website at http://www.diodes.com/datasheets/ap02008.pdf.
IMPORTANT NOTICE Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to any product herein. Diodes Incorporated does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on our website, harmless against all damages. LIFE SUPPORT Diodes Incorporated products are not authorized for use as critical components in life support devices or systems without the expressed written approval of the President of Diodes Incorporated.
DS21219 Rev. 7 - 2
3 of 3 www.diodes.com
GBJ15005 - GBJ1510
