MMSTA14

SPICE MODEL: MMSTA13 MMSTA14 Lead-free Green MMSTA13/MMSTA14 NPN SURFACE MOUNT DARLINGTON TRANSISTOR Features • • • • • • • Epitaxial Planar Die Construction Complementary PNP Type Available (MMSTA63/MMSTA64) Ideal for Low Power Amplification and Switching High Current Gain Ultra-Small Surface Mount Package Lead Free/RoHS Compliant (Note 2) "Green" Device (Note 3 and 4) B G H E A C BC SOT-323 Dim A B C D E G K M Min 0.25 1.15 2.00 0.30 1.20 1.80 0.0 0.90 0.25 0.10 0° Max 0.40 1.35 2.20 0.40 1.40 2.20 0.10 1.00 0.40 0.18 8° 0.65 Nominal Mechanical Data • • • • • • • • • • Case: SOT-323 Case Material: Molded Plastic, "Green" Molding Compound, Note 4. UL Flammability Classification Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020C Terminal Connections: See Diagram Terminals: Solderable per MIL-STD-202, Method 208 Lead Free Plating (Matte Tin Finish annealed over Alloy 42 leadframe). MMSTA13 Marking K2D, K3D (See Page 3) MMSTA14 Marking K3D (See Page 3) Ordering & Date Code Information: See Page 3 Weight: 0.006 grams (approximate) H J K L M J D E L C α All Dimensions in mm B E Maximum Ratings Collector-Base Voltage Collector-Emitter Voltage Emitter-Base Voltage @ TA = 25°C unless otherwise specified Symbol VCBO VCEO VEBO IC Pd RθJA Tj, TSTG Value 30 30 10 300 200 625 -55 to +150 Unit V V V mA mW °C/W °C Characteristic Collector Current - Continuous (Note 1) Power Dissipation (Note 1) Thermal Resistance, Junction to Ambient (Note 1) Operating and Storage and Temperature Range Note: 1. Device mounted on FR-4 PCB, 1 inch x 0.85 inch x 0.062 inch; pad layout as shown on Diodes Inc. suggested pad layout document AP02001, which can be found on our website at http://www.diodes.com/datasheets/ap02001.pdf. 2. No purposefully added lead. 3. Diodes Inc.'s "Green" policy can be found on our website at http://www.diodes.com/products/lead_free/index.php. 4. Product manufactured with Date Code 0609 (week 9, 2006) and newer are built with Green Molding Compound. Product manufactured prior to Date Code 0609 are built with Non-Green Molding Compound and may contain Halogens or Sb2O3 Fire Retardants. DS30165 Rev. 8 - 2 1 of 3 www.diodes.com MMSTA13/MMSTA14 © Diodes Incorporated Electrical Characteristics Characteristic OFF CHARACTERISTICS (Note 5) Collector-Emitter Breakdown Voltage Collector Cutoff Current Emitter Cutoff Current ON CHARACTERISTICS (Note 5) DC Current Gain @ TA = 25°C unless otherwise specified Symbol V(BR)CEO ICBO IEBO MMSTA13 MMSTA14 MMSTA13 MMSTA14 Min 30   5,000 10,000 10,000 20,000   Max  100 100 Unit V nA nA Test Condition IC = 100µA VBE = 0V VCB = 30V, IE = 0 VEB = 10V, IC = 0 IC = 10mA, VCE = 5.0V IC = 10mA, VCE = 5.0V IC = 100mA, VCE = 5.0V IC = 100mA, VCE = 5.0V IC = 100mA, IB = 100µA IC = 100mA, VCE = 5.0V VCB = 10V, f = 1.0MHz, IE = 0 VEB = 0.5V, f = 1.0MHz, IC = 0 VCE = 5.0V, IC = 10mA, f = 100MHz hFE VCE(SAT) VBE(SAT) Cobo Cibo fT  1.5 2.0  V V pF pF MHz Collector-Emitter Saturation Voltage Base-Emitter Saturation Voltage SMALL SIGNAL CHARACTERISTICS Output Capacitance Input Capacitance Current Gain-Bandwidth Product 200 8.0 Typical 15 Typical 125  VCE(SAT), COLLECTOR TO EMITTER SATURATION VOLTAGE (V) Note 1 PD, POWER DISSIPATION (mW) 150 100 50 0 0 25 50 75 100 125 150 175 200 TA, AMBIENT TEMPERATURE (°C) Fig. 1, Max Power Dissipation vs Ambient Temperature 1.10 1.05 1.00 0.95 0.90 0.85 0.80 0.75 0.70 0.65 0.60 0.55 0.50 0.45 0.40 1 IC IB = 1000 TA = -50°C TA = 25°C TA = 150°C 10 100 1000 IC, COLLECTOR CURRENT (mA) Fig. 2, Collector Emitter Saturation Voltage vs. Collector Current 1,000,000 VCE = 5V TA = 150°C hFE, DC CURRENT GAIN 100,000 10,000 TA = -50°C TA = 25°C 1,000 100 1 10 100 1000 IC, COLLECTOR CURRENT (mA) Fig. 3, DC Current Gain vs Collector Current 1.6 1.5 1.4 1.3 1.2 1.1 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 VBE(ON), BASE EMITTER VOLTAGE (V) VCE = 5V TA = -50°C TA = 25°C TA = 150°C 1 10 100 IC, COLLECTOR CURRENT (mA) Fig. 4, Base Emitter Voltage vs. Collector Current DS30165 Rev. 8 - 2 2 of 3 www.diodes.com MMSTA13/MMSTA14 1000 VCE = 5V fT, GAIN BANDWIDTH PRODUCT (MHz) 100 10 1 1 10 IC, COLLECTOR CURRENT (mA) Fig. 5, Gain Bandwidth Product vs Collector Current 100 Ordering Information Device MMSTA13-7-F MMSTA14-7-F (Note 4 & 6) Packaging SOT-323 Shipping 3000/Tape & Reel Notes: 4. Product manufactured with Date Code 0609 (week 9, 2006) and newer are built with Green Molding Compound. Product manufactured prior to Date Code 0609 are built with Non-Green Molding Compound and may contain Halogens or Sb2O3 Fire Retardants. 5. Short duration pulse test used to minimize self-heating effect. 6. For Packaging Details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf. Marking Information YM KxD KxD = Product Type Marking Code, e.g., K2D = MMSTA13 YM = Date Code Marking Y = Year ex: N = 2002 M = Month ex: 9 = September Date Code Key Year Code Month Code 2000 L Jan 1 2001 M Feb 2 2002 N March 3 2003 P Apr 4 2004 R May 5 2005 S Jun 6 2006 T Jul 7 2007 U Aug 8 2008 V Sep 9 2009 W 2010 X Oct O 2011 Y Nov N 2012 Z Dec D IMPORTANT NOTICE Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to any product herein. Diodes Incorporated does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on our website, harmless against all damages. LIFE SUPPORT Diodes Incorporated products are not authorized for use as critical components in life support devices or systems without the expressed written approval of the President of Diodes Incorporated. DS30165 Rev. 8 - 2 3 of 3 www.diodes.com MMSTA13/MMSTA14