MUR120

MUR120 1.0A SUPER-FAST RECTIFIER Features ADVANCE INFORMATION · · · · · · Glass Passivated Die Construction Super-Fast Recovery Time For High Efficiency Low Forward Voltage Drop and High Current Capability Surge Overload Rating to 35A Peak Ideally Suited for Automated Assembly Plastic Material: UL Flammability Classification Rating 94V-0 Case: Molded Plastic Terminals: Solder Plated Terminal Solderable per MIL-STD-202, Method 208 Marking: R120 Polarity: Cathode Band Weight: 0.35 grams (approx.) Mounting Position: Any A B A D C Mechanical Data · · · · · · DO-41 Plastic Dim A B C D Min 25.40 4.06 0.71 2.00 Max ¾ 5.21 0.864 2.72 All Dimensions in mm @ TA = 25°C unless otherwise specified Maximum Ratings and Electrical Characteristics Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current @ TT = 130°C Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave Superimposed on Rated Load (JEDEC Method) Forward Voltage Peak Reverse Current at Rated DC Blocking Voltage Reverse Recovery Time (Note 2) Forward Recovery Time (Note 3) Typical Junction Capacitance (Note 1) Typical Thermal Resistance, Junction to Ambient Operating and Storage Temperature Range @ IF = 1.0A, TJ = 25°C @ IF = 1.0A, TJ = 150°C @ TA = 25°C @ TA = 150°C Symbol VRRM VRWM VR VR(RMS) IO IFSM VFM IRM trr tfr Cj RqJA Tj, TSTG MUR120 200 141 1.0 35 0.875 0.710 2.0 50 25 25 45 72 -65 to +175 Unit V V A A V mA ns ns pF K/W °C Notes: 1. Measured at 1.0MHz and applied reverse voltage of 0V DC. 2. Measured with IF = 0.5A, IR = 1.0A, Irr = 0.25A. See Figure 5. 3. Measured with IF = 1.0A, di/dt = 100A/ms, Duty Cycle £ 2.0%. DS30178 Rev. A-0 1 of 2 MUR120 3 10.0 ADVANCE INFORMATION IO, AVERAGE FORWARD CURRENT (A) IF, INSTANTANEOUS FORWARD CURRENT (A) 7.0 5.0 3.0 2.0 1.0 0.5 TJ = 175 C 0 1000C 25 C 0 2 1 0.1 0.05 0 0 25 50 75 100 125 150 175 TT, TERMINAL TEMPERATURE (°C) Fig. 1 Forward Current Derating Curve 0.01 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 VF, INSTANTANEOUS VOLTAGE (V) Fig. 2 Typical Forward Characteristics IFSM, PEAK FORWARD SURGE CURRENT (A) 60 100 IR, REVERSE CURRENT (µA) Single Half-Sine-Wave (JEDEC Method) TJ = 175 C 10 0 50 40 30 20 10 0 1 10 NUMBER OF CYCLES AT 60Hz Fig. 3 Surge Current Derating Curve 100 1.0 TJ = 100 C 0 0.1 0.01 TJ = 25 C 0 0.001 0 20 40 60 80 100 120 140 160 180 200 VR, REVERSE VOLTAGE (V) Fig. 4 Typical Reverse Characteristics trr +0.5A 50Ω NI (Non-inductive) Device Under Test 50V DC Approx 10Ω NI (-) Pulse Generator (Note 2) (+) (-) 0A -0.25A 1.0Ω NI Oscilloscope (Note 1) (+) Notes: 1. Rise Time = 7.0ns max. Input Impedance = 1.0MΩ, 22pF. 2. Rise Time = 10ns max. Input Impedance = 50Ω. -1.0A Set time base for 50/100 ns/cm Fig. 5 Reverse Recovery Time Characteristic and Test Circuit DS30178 Rev. A-0 2 of 2 MUR120