PBPC1002

PBPC1001 - PBPC1007 10A BRIDGE RECTIFIER Features · · · · · High Current Capability Surge Overload Rating to 150A Peak High Case Dielectric Strength of 1500V Ideal for Printed Circuit Board Application UL Listed Under Recognized Component Index, File Number E94661 H G + AC PBPC-8 Dim Min 18.54 6.35 22.20 Max 19.56 7.60 — Mechanical Data · · · · · · · · · · Case: PBPC-8 Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020C Terminals: Plated Leads Solderable per MIL-STD-202, Method 208 Polarity: Marked on Body Mounting: Through Hole for #6 Screw Mounting Torque: 5.0 Inch-pounds Maximum Ordering Information: See Last Page Marking: Type Number Weight: 3.8 grams (approximate) A E AC A B C D C B A 1.27 Æ Typical 5.33 3.60 Æ 7.37 4.00 Æ D E G H J 12.70 Typical 2.38 X 45° Typical All Dimensions in mm Maximum Ratings and Electrical Characteristics Single phase, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current (Note 1) @ TC = 50°C (Note 2) @ TC = 50°C Symbol VRRM VRWM VR VR(RMS) IO IFSM VFM IR I2 t CT RqJC Tj, TSTG PBPC 1001 50 35 @ TA = 25°C unless otherwise specified PBPC 1002 100 70 PBPC 1003 200 140 PBPC 1004 400 280 10 8.0 150 1.1 10 1.0 64 110 7.5 -65 to +125 PBPC 1005 600 420 PBPC 1006 800 560 PBPC 1007 1000 700 Unit V V A A V µA mA A2 s pF °C/W °C Non-Repetitive Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load Forward Voltage (per element) @ IF = 5.0A Peak Reverse Current @ TC = 25°C at Rated DC Blocking Voltage (per element) @ TC = 100°C I2t Rating for Fusing (t 1.0ms and < 8.3ms. Per element, measured at 1.0 MHz and applied reverse voltage of 4.0V DC. DS21312 Rev. 7 - 2 1 of 3 www.diodes.com PBPC1001-PBPC1007 ã Diodes Incorporated IAV, AVERAGE FORWARD OUTPUT CURRENT (A) 10 Resistive or Inductive load 10 8 Mounted on PC Board IF, FORWARD CURRENT (A) Mounted on Metal chassis 1.0 6 4 0.1 2 Tj = 25°C 0 25 50 75 100 TC, CASE TEMPERATURE (°C) Fig. 1 Forward Current Derating Curve 125 0.01 0 0.4 0.8 1.6 1.2 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics, per element 150 IF, PEAK FORWARD SURGE CURRENT (A) TC = 50°C Single half sine-wave 10 125 Tj = 100°C 100 1.0 75 50 0.1 25 Tj = 25°C 0 1.0 10 NUMBER OF CYCLES AT 60Hz Fig. 3 Typical Reverse Characteristics 100 0.01 0 40 80 120 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) Fig. 4 Typical Reverse Characteristics, per element Ordering Information Device PBPC1001 PBPC1002 PBPC1003 PBPC1004 PBPC1005 PBPC1006 PBPC1007 Notes: (Note 5) Packaging PBPC-8 PBPC-8 PBPC-8 PBPC-8 PBPC-8 PBPC-8 PBPC-8 Shipping 150/Box 150/Box 150/Box 150/Box 150/Box 150/Box 150/Box 5. For packaging details, visit our website at http://www.diodes.com/datasheets/ap02008.pdf. DS21312 Rev. 7 - 2 2 of 3 www.diodes.com PBPC1001-PBPC1007 IMPORTANT NOTICE Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to any product herein. Diodes Incorporated does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on our website, harmless against all damages. LIFE SUPPORT Diodes Incorporated products are not authorized for use as critical components in life support devices or systems without the expressed written approval of the President of Diodes Incorporated. DS21312 Rev. 7 - 2 3 of 3 www.diodes.com PBPC1001-PBPC1007