SB360

SB320 - SB360 3.0A SCHOTTKY BARRIER RECTIFIER Features • • • • • • • • Guard Ring Die Construction for Transient Protection Low Power Loss, High Efficiency High Surge Capability High Current Capability and Low Forward Voltage Drop Surge Overload Rating to 80A Peak For Use in Low Voltage, High Frequency Inverters, Free Wheeling, and Polarity Protection Applications Lead Free Finish, RoHS Compliant (Note 1) IEC 61000-4-2 (ESD - 150pF/330Ω) Contact - ±15kV Mechanical Data • • • • • • • Case: DO-201AD Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020 Terminals: Finish - Tin. Solderable per MIL-STD-202, Method 208 Polarity: Cathode Band Marking: Type Number Weight: 1.1 grams (approximate) ADVANCE INFORMATION Ordering Information (Note 2) Device SB320-B SB320-T SB330-B SB330-T SB340-B SB340-T SB350-B SB350-T SB360-B SB360-T Packaging DO-201AD DO-201AD DO-201AD DO-201AD DO-201AD DO-201AD DO-201AD DO-201AD DO-201AD DO-201AD Shipping 500/Bulk 1200/13” Tape & Reel 500/Bulk 1200/13” Tape & Reel 500/Bulk 1200/13” Tape & Reel 500/Bulk 1200/13” Tape & Reel 500/Bulk 1200/13” Tape & Reel Maximum Ratings @TA = 25°C unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load. For capacitance load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage (Note 4) RMS Reverse Voltage Average Rectified Output Current (Note 3) (See Figure 1) Non-Repetitive Peak Forward Surge Current 8.3ms Single Half Sine-Wave Superimposed on Rated Load Symbol VRRM VRWM VR VR(RMS) IO IFSM SB320 20 14 SB330 30 21 SB340 40 28 3.0 80 SB350 50 35 SB360 60 42 Unit V V A A Thermal Characteristics Characteristic Typical Thermal Resistance (Note 5) Operating Temperature Range Storage Temperature Range Symbol RθJA RθJL TJ TSTG SB320 SB330 SB340 30 10 -65 to +150 SB350 SB360 Unit °C/W °C °C -65 to +125 -65 to +150 Electrical Characteristics @TA = 25°C unless otherwise specified Characteristic Forward Voltage Peak Reverse Current at Rated DC Blocking Voltage (Note 4) Notes: @ IF = 3.0A @ TA = 25°C @ TA = 100°C Symbol VFM IRM SB320 SB330 0.50 SB340 0.5 SB350 0.74 SB360 Unit V mA 1. EU Directive 2002/95/EC (RoHS). All applicable RoHS exemptions applied, see EU Directive 2002/95/EC Annex Notes 2. For packaging details, go to our website at http://www.diodes.com. 3. Measured at ambient temperature at a distance of 9.5mm from the case. 4. Short duration pulse test used to minimize self-heating effect. 5. Thermal resistance from junction to lead vertical P.C.B. mounted, 0.500" (12.7mm) lead length with 2.5 x 2.5" (63.5 x 63.5mm) copper pad. SB320 - SB360 Document number: DS23023 Rev. 9 - 2 1 of 3 www.diodes.com November 2010 © Diodes Incorporated SB320 - SB360 3.0 10 IF, INSTANTANEOUS FORWARD CURRENT (A) IO, AVERAGE FORWARD CURRENT (A) 2.5 2.0 ADVANCE INFORMATION 1.5 1.0 1.0 0.5 0 25 50 75 100 125 150 TL, LEAD TEMPERATURE (°C) Fig. 1 Forward Current Derating Curve 0.1 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics IFSM, PEAK FORWARD SURGE CURRENT (A) 80 8.3ms Single Half-Sine-Wave Tj = Tj(max) 1000 T j = 25 °C f = 1.0MHz Vsig = 50m Vp-p 48 CT, TOTAL CAPACITANCE (pF) 64 100 32 16 SB320 - SB340 SB350 & SB360 0 1 10 100 10 0.1 1 10 100 IR, INSTANTANEOUS REVERSE CURRENT (mA) NUMBER OF CYCLES AT 60 Hz Fig. 3 Max Non-Repetitive Peak Fwd Surge Current 10 VR, REVERSE VOLTAGE (V) Fig. 4 Typical Total Capacitance 1 0.1 0.01 0.001 0.0001 0 20 40 60 80 100 PERCENT OF RATED PEAK REVERSE (%) Fig. 5 Typical Reverse Characteristics SB320 - SB360 Document number: DS23023 Rev. 9 - 2 2 of 3 www.diodes.com November 2010 © Diodes Incorporated SB320 - SB360 Package Outline Dimensions ADVANCE INFORMATION Dim A B C D DO-201AD Min 25.40 7.20 1.20 4.80 All Dimensions in mm Max ⎯ 9.50 1.30 5.30 IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright © 2010, Diodes Incorporated www.diodes.com SB320 - SB360 Document number: DS23023 Rev. 9 - 2 3 of 3 www.diodes.com November 2010 © Diodes Incorporated