SBL3040CT

SBL3030CT - SBL3040CT 30A SCHOTTKY BARRIER RECTIFIER Features • • • • • • Guard Ring Die Construction for Transient Protection Low Power Loss, High Efficiency High Surge Capability High Current Capability and Low Forward Voltage Drop For Use in Low Voltage, High Frequency Inverters, Free Wheeling, and Polarity Protection Applications Lead Free Finish, RoHS Compliant (Note 3) TO-220AB Dim A B C D E G H J K L M N P Min 14.48 10.00 2.54 5.90 2.80 12.70 2.40 0.69 3.54 4.07 1.15 0.30 2.04 Max 15.75 10.40 3.43 6.40 3.93 14.27 2.70 0.93 3.78 4.82 1.39 0.50 2.79 Mechanical Data • • • • • • • Case: TO-220AB Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020C Terminals: Finish – Tin. Solderable per MIL-STD-202, Method 208 Polarity: As Marked on Body Marking: Type Number Ordering Information: See Page 3 Weight: 2.24 grams (approximate) • All Dimensions in mm Maximum Ratings and Electrical Characteristics Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current (Note 1) Non-Repetitive Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load Forward Voltage Drop Peak Reverse Current at Rated DC Blocking Voltage Typical Total Capacitance (Note 2) Typical Thermal Resistance Junction to Case (Note 1) Operating Temperature Range Storage Temperature Range Critical Rate of Rise Reverse Voltage Notes: 1. 2. 3. @TA = 25°C unless otherwise specified Symbol VRRM VRWM VR VR(RMS) @ TC = 100°C IO IFSM VFM IRM CT RθJC Tj TSTG dv/dt SBL 3030CT 30 21 30 250 0.55 1.0 75 450 1.5 -55 to +125 -55 to +150 10,000 SBL 3040CT 40 28 Unit V V A A V mA pF °C/W °C °C V/μs @ IF = 15A, TC = 25°C @TC = 25°C @ TC = 100°C Thermal resistance junction to case mounted on heatsink. Measured at 1.0MHz and applied reverse voltage of 4.0V DC. RoHS revision 13.2.2003. Glass and high temperature solder exemptions applied, see EU Directive Annex Notes 5 and 7. DS30022 Rev. 5 - 2 1 of 3 www.diodes.com SBL3030CT - SBL3040CT © Diodes Incorporated DS30022 Rev. 5 - 2 2 of 3 www.diodes.com SBL3030CT - SBL3040CT © Diodes Incorporated Ordering Information Device SBL3030CT SBL3040CT Notes: 4. (Note 4) Packaging TO-220AB TO-220AB Shipping 50/Tube 50/Tube For Packaging Details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf. IMPORTANT NOTICE Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to any product herein. Diodes Incorporated does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on our website, harmless against all damages. LIFE SUPPORT Diodes Incorporated products are not authorized for use as critical components in life support devices or systems without the expressed written approval of the President of Diodes Incorporated. DS30022 Rev. 5 - 2 3 of 3 www.diodes.com SBL3030CT - SBL3040CT © Diodes Incorporated