SBM340-13-F

NOT RECOMMENDED FOR NEW DESIGN USE PDS340 SBM340 3A SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER POWERMITE®3 Features • • • • • Guard Ring Die Construction for Transient Protection Low Power Loss, High Efficiency Low Forward Voltage Drop For Use in Low Voltage, High Frequency Inverters, Free Wheeling, and Polarity Protection Applications Lead Free Finish/RoHS Compliant (Note 2) A P 3 E G POWERMITE®3 Dim A B C D E G Min 4.03 6.40 Max 4.09 6.61 B J H .889 NOM 1.83 NOM 1.10 5.01 4.37 .71 .36 1.73 1.14 5.17 4.43 .77 .46 1.83 .178 NOM Mechanical Data • • • • • • • • • Case: POWERMITE 3 Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020 Terminals: Solderable per MIL-STD-202, Method 208 Lead Free Plating (Matte Tin Finish). Polarity: See Diagram Marking Information: See Page 3 Ordering Information: See Page 3 Weight: 0.072 grams (approximate) ® 1 2 M D C PIN 1 PIN 2 PIN 3, BOTTOMSIDE HEAT SINK H K C L J K L M P .178 NOM All Dimensions in mm Note: Pins 1 & 2 must be electrically connected at the printed circuit board. Maximum Ratings @TA = 25°C unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current (See also Figure 5) Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave Superimposed on Rated Load @ TC = 100°C Typical Thermal Resistance Junction to Soldering Point Operating Temperature Range Storage Temperature Range Symbol VRRM VRWM VR VR(RMS) IO IFSM RθJS TJ TSTG Value 40 28 3 50 3.4 -55 to +125 -55 to +150 Unit V V A A °C/W °C °C Electrical Characteristics Characteristic Reverse Breakdown Voltage (Note 1) Forward Voltage @TA = 25°C unless otherwise specified Symbol V(BR)R VFM Min 40 ⎯ Typ ⎯ 0.46 0.40 0.57 0.54 15 ⎯ 180 Max ⎯ 0.50 0.44 0.61 0.58 500 20 ⎯ Unit V V μA mA pF Test Condition IR = 0.5mA IF = 3A, TJ = 25°C IF = 3A, TJ = 125°C IF = 6A, TJ = 25°C IF = 6A, TJ = 125°C TJ = 25°C, VR = 40V TJ = 100°C, VR = 40V f = 1.0MHz, VR = 4.0V DC Reverse Current (Note 1) Total Capacitance Notes: IRM CT ⎯ ⎯ 1. Short duration pulse test used to minimize self-heating effect. 2. EU Directive 2002/95/EC (RoHS). All applicable RoHS exemptions applied, see EU Directive 2002/95/EC Annex Notes. DS30362 Rev. 6 - 2 1 of 4 www.diodes.com SBM340 © Diodes Incorporated NOT RECOMMENDED FOR NEW DESIGN USE PDS340 10,000 10 IF, INSTANTANEOUS FORWARD CURRENT (A) 1000 100 10 1.0 1 0.1 0.1 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 1 Typical Forward Characteristics 0.01 0 10 20 30 40 VR, INSTANTANEOUS REVERSE VOLTAGE (V) Fig. 2 Typical Reverse Characteristics 1000 f = 1 MHz TJ = 25°C IFSM, PEAK FORWARD SURGE CURRENT (A) 50 40 CT, TOTAL CAPACITANCE (pF) 30 100 20 10 0 1 10 100 10 0.1 1 10 100 VR, DC REVERSE VOLTAGE (V) Fig. 4 Typical Capacitance vs. Reverse Voltage NUMBER OF CYCLES AT 60 Hz Fig. 3 Max Non-Repetitive Peak Forward Surge Current DS30362 Rev. 6 - 2 2 of 4 www.diodes.com SBM340 © Diodes Incorporated NOT RECOMMENDED FOR NEW DESIGN USE PDS340 PF(AV), AVERAGE FORWARD POWER DISSIPATION (W) 4 3.5 3 2.5 2 1.5 1 0.5 0 4 IF, DC FORWARD CURRENT (A) 3 2 1 0 0 1 2 3 25 50 75 100 125 150 4 5 6 7 TA, AMBIENT TEMPERATURE (°C) Fig. 5 DC Forward Current Derating IF(AV), AVERAGE FORWARD CURRENT (A) Fig. 6 Forward Power Dissipation Ordering Information (Note 6) Device SBM340-13-F Notes: Packaging POWERMITE®3 Shipping 5000/Tape & Reel 3. TA = TSOLDERING POINT, RθJS = 3.4°C/W, RθSA = 0°C/W. 4. Device mounted on GETEK substrate, 2”x2”, 2 oz. copper, double-sided, cathode pad dimensions 0.75” x 1.0”, anode pad dimensions 0.25” x 1.0”. RθJA in range of 20-40°C/W. 5. Device mounted on FR-4 substrate, 2”x2”, 2 oz. copper, single-sided, pad layout as per Diodes Inc. suggested pad layout document AP02001 which can be found on our website at http://www.diodes.com/datasheets/ap02001.pdf. RθJA in range of 95-115°C/W. 6. For packaging details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf. Marking Information SBM340 YYWW(K) SBM340 = Product type marking code = Manufacturers’ code marking YYWW = Date code marking YY = Last digit of year (ex: 02 for 2002) WW = Week code (01 to 53) (K) = Factory Designator DS30362 Rev. 6 - 2 3 of 4 www.diodes.com SBM340 © Diodes Incorporated NOT RECOMMENDED FOR NEW DESIGN USE PDS340 IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright © 2010, Diodes Incorporated www.diodes.com POWERMITE is a registered trademark of Microsemi Corporation. DS30362 Rev. 6 - 2 4 of 4 www.diodes.com SBM340 © Diodes Incorporated