SBR0220LP

SPICE MODEL: SBR0220LP SBR0220LP 0.2A SBR® Super Barrier Rectifier Features N EW PRODUCT • • • • • • • Low Leakage Current Patented Super Barrier Rectifier Technology Excellent High Temperature Stability Soft, Fast Switching Capability 150ºC Operating Junction Temperature Lead Free Finish, RoHS Compliant (Note 1) “Green” Molding Compound (No Br, Sb) Mechanical Data • • • • • • • • Case: DFN1006-2 Case Material: Molded Plastic, “Green” Molding compound. UL Flammability Classification Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020C Polarity Indicator: Cathode Dot Terminals: Finish - NiPdAu annealed over Copper leadframe. Solderable per MIL-STD-202, Method 208 Marking Information: See Page 3 Ordering Information: See Page 3 Weight: 0.001 grams (Approx.) Maximum Ratings @ TA = 25ºC unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current (See Figure 1) Non-Repetitive Peak Forward Surge Current 8.3ms Single Half Sine-Wave Superimposed on Rated Load Maximum Thermal Resistance Thermal Resistance Junction to Soldering (Note 2) Thermal Resistance Junction to Ambient (Note 3) Operating and Storage Temperature Range Symbol VRRM VRWM VRM VR(RMS) IO IFSM RӨJS RӨJA TJ, TSTG Value 20 14 0.2 5.0 17 304 -65 to +150 Unit V V A A ºC/W ºC Electrical Characteristics @ TA = 25ºC unless otherwise specified Characteristic Reverse Breakdown Voltage (Note 4) Symbol V(BR)R Min 20 Typ 0.38 0.30 0.44 0.38 2 0.43 Max 0.42 0.33 0.48 0.41 50 1.3 Unit V Test Condition IR = 400 µA IF = 0.1A, TJ = 25ºC IF = 0.1A, TJ = 150ºC IF = 0.2A, TJ = 25ºC IF = 0.2A, TJ = 150ºC VR = 20V, TJ = 25ºC VR = 20V, TJ = 150ºC Forward Voltage Drop VF - V Leakage Current (Note 4) Notes: IR - µA mA 1. RoHS revision 13.2.2003. High temperature solder exemption applied, see EU Directive Annex Note 7. 2. Theoretical RӨJS calculated from the top center of the die straight down to the PCB cathode tab solder junction. 3. FR-4 PCB, 2oz. Copper, minimum recommended pad layout per http://www.diodes.com/datasheets/ap02001.pdf. 4. Short duration pulse test used to minimize self-heating effect. __________ SBR is a registered trademark of Diodes Incorporated. SBR0220LP Rev. 3 - 2 1 of 4 www.diodes.com May 2007 © Diodes Incorporated SBR0220LP N EW PRODUCT 0.25 IF(AV), AVERAGE FORWARD CURRENT(A) Note 3 0.2 0.15 0.1 0.05 0 0 25 50 75 100 125 150 175 TA, AMBIENT TEMPERATURE (°C) Fig. 4 Forward Current Derating Curve 200 Fig. 3 Typical Total Capacitance 0.4 PF(AV), AVERAGE FORWARD POWER DISSIPATION (W) 0.3 TJ =150°C 0.2 0.1 0 0 0.1 0.2 0.3 0.4 0.5 0.6 IF(AV), AVERAGE FORWARD CURRENT (A) Fig. 5 Forward Power Dissipation SBR0220LP Rev. 3 - 2 2 of 4 www.diodes.com May 2007 © Diodes Incorporated SBR0220LP Package Outline Drawing TOP VIEW N EW PRODUCT Cathode Indicator DFN1006-2 G Dim H Min Max Typ 0.95 1.075 1.00 0.55 0.675 0.60 0.45 0.55 0.50 0.20 0.30 0.25 0.47 0.53 0.50 0 ⎯ 0.05 0.03 ⎯ 0.40 A B A C D G R B C H N R 0.05 0.15 0.10 D N All Dimensions in mm Marking, Polarity, Weight & Ordering Information Case Style SBR0220LP (DFN1006-2) Marking Weight 22 Top View Back View 0.001g (approx.) Ordering Information SBR0220LP-7 3000/Tape & Reel Date Code 22 = Product Type Marking Code Dot Denotes Cathode Side SBR0220LP Rev. 3 - 2 3 of 4 www.diodes.com May 2007 © Diodes Incorporated SBR0220LP Suggested Pad Layout N EW PRODUCT IMPORTANT NOTICE Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to any product herein. Diodes Incorporated does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on our website, harmless against all damages. LIFE SUPPORT Diodes Incorporated products are not authorized for use as critical components in life support devices or systems without the expressed written approval of the President of Diodes Incorporated. SBR0220LP Rev. 3 - 2 4 of 4 www.diodes.com May 2007 © Diodes Incorporated