SBR10U200P5

SBR10U200P5 10.0A SBR® SUPER BARRIER RECTIFIER PowerDI®5 Please click here to visit our online spice models database. Features • • • • • • • Ultra Low Forward Voltage Drop Excellent High Temperature Stability Patented Super Barrier Rectifier Technology Soft, Fast Switching Capability 175ºC Operating Junction Temperature Lead Free Finish, RoHS Compliant (Note 1) “Green” Molding Compound (No Br, Sb) Mechanical Data • • • • • • • • Case: PowerDI 5 Case Material: Molded Plastic, “Green” Molding Compound. UL Flammability Classification Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020D Terminals: Matte Tin Finish annealed over Copper leadframe. Solderable per MIL-STD-202, Method 208 Polarity: See Diagram Marking Information: See Page 3 Ordering Information: See Page 3 Weight: 0.093 grams (approximate) BOTTOMSIDE HEAT SINK ® N EW PRODUCT LEFT PIN RIGHT PIN Top View Bottom View Note: Pins Left & Right must be electrically connected at the printed circuit board. Maximum Ratings @TA = 25°C unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load. For capacitance load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage Average Rectified Output Current (See Figure 1) Non-Repetitive Peak Forward Surge Current 8.3ms Single Half Sine-Wave Superimposed on Rated Load Symbol VRRM VRWM VRM IO IFSM Value 200 10 180 Unit V A A Thermal Characteristics Characteristic Maximum Thermal Resistance Junction to Ambient (Note 2) Operating and Storage Temperature Range Symbol RθJA TJ, TSTG Value 77 -65 to +175 Unit ºC/W ºC Electrical Characteristics Characteristic Forward Voltage Drop Leakage Current (Note 5) Notes: @TA = 25°C unless otherwise specified Symbol VF IR Min Typ 0.75 0.62 0.83 0.18 Max 0.82 0.67 0.88 0.1 10 Unit V mA Test Condition IF = 5A, TJ = 25ºC IF = 5A, TJ = 125ºC IF = 10A, TJ = 25ºC VR = 200V, TJ = 25ºC VR = 200V, TJ = 125ºC 1. EU Directive 2002/95/EC (RoHS). All applicable RoHS exemptions applied. Please visit our website at http://www.diodes.com/products/lead_free.html. 2. Polymide PCB, 2 oz. Copper, minimum recommended pad layout per http://www.diodes.com/datasheets/ap02001.pdf. 3. Short duration pulse test used to minimize self-heating effect. SBR and PowerDI are registered trademarks of Diodes Incorporated. 1 of 3 SBR10U200P5 Document number: DS31234 Rev. 4 - 2 March 2009 © Diodes Incorporated www.diodes.com SBR10U200P5 IF, INSTANTANEOUS FORWARD CURRENT (A) 2.5 100 PD, POWER DISSIPATION (W) 2 10 1 1.5 T A = 150°C TA = 125°C 0.1 TA = 85°C TA = 25°C 1 N EW PRODUCT 0.01 TA = -55°C 0.5 0.001 0.0001 0 0.2 0.4 0.6 0.8 1 1.2 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics 0 0 1 2 3 4 5 IF(AV), AVERAGE FORWARD CURRENT (A) Fig. 1 Forward Power Dissipation IR, INSTANTANEOUS REVERSE CURRENT (µA) 1,000 TA = 150°C 10,000 100 TA = 125°C CT, TOTAL CAPACITANCE (pF) f = 1MHz 1,000 10 T A = 85°C 100 1 T A = 25°C 10 0.1 0 20 40 60 80 100 120 140 160 180 200 VR, INSTANTANEOUS REVERSE VOLTAGE (V) Fig. 3 Typical Reverse Characteristics 175 Based on Lead Temperature TL 1 0.1 1 10 100 VR, DC REVERSE VOLTAGE (V) Fig. 4 Total Capacitance vs. Reverse Voltage 12 IF(AV), AVERAGE FORWARD CURRENT (A) 10 RθJA = RθJC 8.0 6.0 TA, DERATED AMBIENT TEMPERATURE (°C) 150 125 100 75 50 25 0 0 20 40 60 80 100 120 140 160 180 200 VR, DC REVERSE VOLTAGE (V) Fig. 6 Operating Temperature Derating 4.0 Note 2 2.0 0 0 25 150 50 75 100 125 TL, LEAD TEMPERATURE (°C) Fig. 5 Forward Current Derating Curve 175 SBR and PowerDI are registered trademarks of Diodes Incorporated. 2 of 3 SBR10U200P5 Document number: DS31234 Rev. 4 - 2 March 2009 © Diodes Incorporated www.diodes.com SBR10U200P5 Ordering Information Part Number SBR10U200P5-13 Notes: (Note 4) Case ® PowerDI 5 Packaging 5000/Tape & Reel 4. For packaging details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf. Marking Information S10U200 N EW PRODUCT YYWWK S10U200 = Product Type Marking Code = Manufacturers’ Code Marking YYWW = Date Code Marking YY = Last Two Digits of Year (ex: 08 for 2008) WW = Week Code 01 to 52 K = Factory Designator Package Outline Dimensions A D b2 A2 D2 ® L E E1 E2 W L1 e b1 b1 A2 PowerDI 5 Dim Min Max A 1.05 1.15 A2 0.33 0.43 b1 0.80 0.99 b2 1.70 1.88 D 3.90 4.05 D2 3.054 Typ E 6.40 6.60 e 1.84 Typ E1 5.30 5.45 E2 3.549 Typ L 0.75 0.95 L1 0.50 0.65 W 1.10 1.41 All Dimensions in mm Suggested Pad Layout Z C X2 E1 X1 Y1 Dimensions Z X1 X2 Y1 Y2 C E1 Value (in mm) 6.6 1.4 3.6 0.8 4.7 3.87 0.9 Y2 IMPORTANT NOTICE Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to any product herein. Diodes Incorporated does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on our website, harmless against all damages. LIFE SUPPORT Diodes Incorporated products are not authorized for use as critical components in life support devices or systems without the expressed written approval of the President of Diodes Incorporated. SBR and PowerDI are registered trademarks of Diodes Incorporated. 3 of 3 SBR10U200P5 Document number: DS31234 Rev. 4 - 2 March 2009 © Diodes Incorporated www.diodes.com