SBR12U120P5

SBR12U120P5 12.0A SBR® SUPER BARRIER RECTIFIER PowerDI®5 Features • • • • • • • Ultra Low Forward Voltage Drop Excellent High Temperature Stability Patented Super Barrier Rectifier Technology Soft, Fast Switching Capability 150ºC Operating Junction Temperature Lead Free Finish, RoHS Compliant (Note 1) “Green” Molding Compound (No Br, Sb) Mechanical Data • • • • • • Case: PowerDI 5 Case Material: Molded Plastic, “Green” Molding Compound. UL Flammability Classification Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020 Terminals: Matte Tin Finish annealed over Copper leadframe. Solderable per MIL-STD-202, Method 208 Polarity: See Diagram Weight: 0.093 grams (approximate) ® N EW PRODUCT LEFT PIN RIGHT PIN BOTTOMSIDE HEAT SINK Top View Bottom View Note: Pins Left & Right must be electrically connected at the printed circuit board. Ordering Information (Note 2) Part Number SBR12U120P5-13 Notes: Case ® PowerDI 5 Packaging 5000/Tape & Reel 1. EU Directive 2002/95/EC (RoHS). All applicable RoHS exemptions applied, see EU Directive 2002/95/EC Annex Notes. 2. For packaging details, go to our website at http://www.diodes.com. Marking Information S12U120 YYWWK S12U120 = Product Type Marking Code = Manufacturers’ Code Marking YYWW = Date Code Marking YY = Last Two Digits of Year (ex: 10 for 2010) WW = Week Code (01 - 53) K = Factory Designator SBR and PowerDI are registered trademarks of Diodes Incorporated. 1 of 4 SBR12U120P5 Document number: DS32064 Rev. 2 - 2 December 2010 © Diodes Incorporated www.diodes.com SBR12U120P5 Maximum Ratings @TA = 25°C unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load. For capacitance load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage Average Rectified Output Current (See Figure 1) Non-Repetitive Peak Forward Surge Current 8.3ms Single Half Sine-Wave Superimposed on Rated Load Symbol VRRM VRWM VRM IO IFSM Value 120 12 250 Unit V A A N EW PRODUCT Thermal Characteristics Characteristic Maximum Thermal Resistance Junction to Ambient (Note 3) Operating and Storage Temperature Range Symbol RθJA TJ, TSTG Value 27 -65 to +150 Unit ºC/W ºC Electrical Characteristics @TA = 25°C unless otherwise specified Characteristic Forward Voltage Drop Leakage Current (Note 4) Notes: Symbol VF IR Min - Typ 0.63 2 Max 0.80 0.68 0.25 35 Unit V mA Test Condition IF = 12A, TJ = 25ºC IF = 12A, TJ = 125ºC VR = 120V, TJ = 25ºC VR = 120V, TJ = 125ºC 3. Device mounted on Polymide PCB with 16x recommended pad layout. 4. Short duration pulse test used to minimize self-heating effect. 4.5 PD , POWER DISSIPATION (W) 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0 0 2 4 6 8 10 IF(AV) AVERAGE FORWARD CURRENT (A) Fig. 1 Forward Power Dissipation IF, INSTANTANEOUS FORWARD CURRENT (A) 5.0 100 10 TA = 150°C 1 TA = 125°C TA = 85°C 0.1 TA = 25°C 0.01 0.001 0.0001 0 0.2 0.4 0.6 0.8 1.0 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics SBR and PowerDI are registered trademarks of Diodes Incorporated. 2 of 4 SBR12U120P5 Document number: DS32064 Rev. 2 - 2 December 2010 © Diodes Incorporated www.diodes.com SBR12U120P5 IR, INSTANTANEOUS REVERSE CURRENT (µA) 100,000 100,000 TA = 150°C 1,000 CT, TOTAL CAPACITANCE (pF) 10,000 TA = 125°C 10,000 100 TA = 85°C N EW PRODUCT 10 TA = 25°C 1,000 1 0.1 0 20 40 60 80 100 120 VR, INSTANTANEOUS REVERSE VOLTAGE (V) Fig. 3 Typical Reverse Characteristics TA, DERATED AMBIENT TEMPERATURE (°C) 100 0.1 1 10 100 VR, DC REVERSE VOLTAGE (V) Fig. 4 Total Capacitance vs. Reverse Voltage 12 IF(AV), AVERAGE FORWARD CURRENT (A) Based on Lead Temperature (TL) RθJA = RθJC 150 125 10 8 Note 3 100 6 75 4 50 2 0 0 25 50 75 100 125 150 TL, LEAD TEMPERATURE (°C) Fig. 5 Forward Current Derating Curve 175 25 0 0 20 40 60 80 100 VR, DC REVERSE VOLTAGE (V) Fig. 6 Operating Temperature Derating 120 Package Outline Dimensions A D b2 A2 D2 L E E1 E2 W L1 e b1 b1 A2 PowerDI 5 Dim Min Max A 1.05 1.15 A2 0.33 0.43 b1 0.80 0.99 b2 1.70 1.88 D 3.90 4.05 D2 3.054 Typ E 6.40 6.60 e 1.84 Typ E1 5.30 5.45 E2 3.549 Typ L 0.75 0.95 L1 0.50 0.65 W 1.10 1.41 All Dimensions in mm ® SBR and PowerDI are registered trademarks of Diodes Incorporated. 3 of 4 SBR12U120P5 Document number: DS32064 Rev. 2 - 2 December 2010 © Diodes Incorporated www.diodes.com SBR12U120P5 Suggested Pad Layout X Y N EW PRODUCT X1 (2x) Y1 (2x) C G Dimensions C G X X1 Y Y1 Value (in mm) 1.840 0.852 3.360 1.390 4.860 1.400 IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright © 2010, Diodes Incorporated www.diodes.com SBR and PowerDI are registered trademarks of Diodes Incorporated. 4 of 4 SBR12U120P5 Document number: DS32064 Rev. 2 - 2 December 2010 © Diodes Incorporated www.diodes.com