SBR20A200CT_08

SBR20A200CT SBR20A200CTFP 20A SBR® SUPER BARRIER RECTIFIER Features • • • • • Low Forward Voltage Drop Excellent High Temperature Stability Patented Super Barrier Rectifier Technology Soft, Fast Switching Capability Lead Free Finish, RoHS Compliant (Note 2) Mechanical Data • • • • • • • Case: TO-220AB, ITO-220AB Case Material: Molded Plastic, UL Flammability Classification Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020D Terminals: Matte Tin Finish annealed over Copper leadframe. Solderable per MIL-STD-202, Method 208 Marking Information: See Page 2 Ordering Information: See Page 2 Weight: TO-220AB – 2.1 grams (approximate) ITO-220AB – 1.9 grams (approximate) N EW PRODUCT TO-220AB ITO-220AB Package Pin Out Configuration Maximum Ratings @TA = 25°C unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load. For capacitance load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage Maximum Voltage Rate of Change (Rated VR) RMS Reverse Voltage Average Rectified Output Current @ TC = 150ºC Non-Repetitive Peak Forward Surge Current 8.3ms Single Half Sine-Wave Superimposed on Rated Load Peak Repetitive Reverse Surge Current (2μS-1KHz) Symbol VRRM VRWM VRM dv/dt VR(RMS) IO IFSM IRRM Value 200 10,000 141 20 180 3 Unit V V/μs V A A A Thermal Characteristics Characteristic Maximum Thermal Resistance (per leg) Package = TO-220AB Package = ITO-220AB Operating and Storage Temperature Range Symbol RθJC TJ, TSTG Value 2 4 -65 to +175 Unit ºC/W ºC Electrical Characteristics Characteristic Reverse Breakdown Voltage (Note 1) Forward Voltage Drop (Per Leg) Leakage Current (Note 1) Notes: @TA = 25°C unless otherwise specified Symbol V(BR)R VF IR Min 200 Typ 0.66 Max 0.86 0.72 0.96 0.1 10 Unit V V mA Test Condition IR = 0.1mA IF = 10A, TJ = 25ºC IF = 10A, TJ = 125ºC IF = 20A, TJ = 25ºC VR = 200V, TJ = 25ºC VR = 200V, TJ = 125ºC 1. Short duration pulse test used to minimize self-heating effect. 2. RoHS revision 13.2.2003. High temperature solder exemption applied, see EU Directive Annex Note 7. SBR is a registered trademark of Diodes Incorporated. SBR20A200 Document number: DS30992 Rev. 4 - 2 1 of 3 www.diodes.com March 2008 © Diodes Incorporated SBR20A200CT SBR20A200CTFP IF(AVE), AVERAGE FORWARD CURRENT (A) 10 IF, INSTANTANEOUS FORWARD CURRENT (A) 100 10 Tj=175°C 5 N EW PRODUCT 1 Tj=125°C Tj=75°C Tj=25°C 0 0 25 50 75 100 125 150 175 TC CASE TEMPERATURE (°C) 0.1 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Figure 1: Current Derating Curve, Per Element 10 IR, INSTANTANEOUS REVERSE CURRENT (mA) Figure 2: Typical Forward Characteristics, Per Element Tj=175°C 1 Tj=125°C 0.1 0.01 Tj=75°C 0.001 Tj=25°C 0.0001 0 50 100 150 200 VR, INSTANTANEOUS REVERSE VOLTAGE (V) Figure 3: Typical Reverse Characteristics, Per Element Ordering Information Part Number SBR20A200CT SBR20A200CTFP Notes: (Note 3) Case TO-220AB ITO-220AB Packaging 50 pieces/tube 50 pieces/tube 3. For packaging details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf. Marking Information SBR 20A200CT YYWW AB SBR20A200CT = Product Type Marking Code AB = Foundry and Assembly Code YYWW = Date Code Marking YY = Last two digits of year, ex: 06 = 2006 WW = Week (01-52) SBR 20A00CTFP YYWW AB SBR20A200CTFP = Product Type Marking Code AB = Foundry and Assembly Code YYWW = Date Code Marking YY = Last two digits of year, ex: 06 = 2006 WW = Week (01-52) SBR is a registered trademark of Diodes Incorporated. SBR20A200 Document number: DS30992 Rev. 4 - 2 2 of 3 www.diodes.com March 2008 © Diodes Incorporated SBR20A200CT SBR20A200CTFP Package Outline Dimensions E Q A P H1 A1 SEATING PLANE D D1 1 2 3 L1 b2 L e e1 b c A2 TO-220AB Dim Min Typ Max A 3.56 4.82 A1 0.51 1.39 A2 2.04 2.92 b 0.39 0.81 1.01 c 0.356 0.61 D 14.22 16.51 D1 8.39 9.01 e 2.54 e1 5.08 E 9.66 10.66 H1 5.85 6.85 L 12.70 14.73 L1 6.35 P 3.54 4.08 Q 2.54 3.42 All Dimensions in mm ITO-220AB ALTERNATE (Note 4) DIM. MIN. MAX. A 4.30 4.70 A1 1.3 b 0.50 0.75 b1 1.10 1.35 b2 1.50 1.75 c 0.50 0.75 D 14.80 15.20 E 9.96 10.36 e 2.54 typ F 2.80 3.20 J1 2.50 2.90 L 12.80 13.60 L1 1.70 1.90 L2 1.90 2.10 ØP 3.50 typ Q 2.70 typ All Dimensions in mm E Q ØP A A1 10° 5° D D1 L1 1 3 x b1 2 3 5° 5° A2 5° 3xb 2xe L c ITO-220AB (Note 4) Dim Min Typ Max A 4.50 4.70 4.90 A1 3.04 3.24 3.44 A2 2.56 2.76 2.96 b 0.50 0.60 0.75 b1 1.10 1.20 1.35 c 0.50 0.60 0.70 D 15.67 15.87 16.07 D1 8.99 9.19 9.39 e 2.54 E 9.91 10.11 10.31 L 9.45 9.75 10.05 L1 15.80 16.00 16.20 P 2.98 3.18 3.38 Q 3.10 3.30 3.50 All Dimensions in mm N EW PRODUCT E ØP Q + A F D Not Through Holes 1 L1 2 3 L2 b2 A1 J1 b1 L b e c Notes: 4. For product manufactured with Date Code 0733 (week 33, 2007) and newer, please refer to ITO-220AB dimensions. For product manufactured prior to Date Code 0733, please refer to ITO-220AB ALTERNATE dimensions. IMPORTANT NOTICE Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to any product herein. Diodes Incorporated does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on our website, harmless against all damages. LIFE SUPPORT Diodes Incorporated products are not authorized for use as critical components in life support devices or systems without the expressed written approval of the President of Diodes Incorporated. SBR is a registered trademark of Diodes Incorporated. SBR20A200 Document number: DS30992 Rev. 4 - 2 3 of 3 www.diodes.com March 2008 © Diodes Incorporated