SBR3045CTBQ-13

SBR3045CTB 30A SBR® SUPER BARRIER RECTIFIER Features • • • • • • • Low Forward Voltage Drop Excellent High Temperature Stability Patented Super Barrier Rectifier Technology Soft, Fast Switching Capability 150ºC Operating Junction Temperature Lead Free Finish, RoHS Compliant (Note 1) Qualified to AEC-Q101 Standards for High Reliability Mechanical Data • • • • • Case: TO263 (D Pak) Case Material: Molded Plastic, UL Flammability Classification Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020 Terminals: Matte Tin Finish annealed over Copper leadframe. Solderable per MIL-STD-202, Method 208 Weight: 1.6 grams (approximate) 2 N EW PRODUCT Top View Package Pin-Out Configuration Ordering Information (Note 2) Part Number SBR3045CTB SBR3045CTB-13 SBR3045CTBQ-13 Notes: Qualification Commercial Commercial Automotive Case TO263 TO263 TO263 Packaging 50 pieces/tube 800/Tape & Reel 800/Tape & Reel 1. EU Directive 2002/95/EC (RoHS). All applicable RoHS exemptions applied, see EU Directive 2002/95/EC Annex Notes 2. For packaging details, go to our website at http://www.diodes.com. Marking Information SBR3045CTB = Product Type Marking Code AB = Foundry and Assembly Code YYWW = Date Code Marking YY = Last two digits of year (ex: 08 = 2008) WW = Week (01 - 53) SBR is a registered trademark of Diodes Incorporated. SBR3045CTB Document number: DS31665 Rev. 2 - 2 1 of 4 www.diodes.com July 2011 © Diodes Incorporated SBR3045CTB Maximum Ratings @TA = 25°C unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load. For capacitance load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage Per Leg Average Rectified Output Current @ TC = 150ºC Total Non-Repetitive Peak Forward Surge Current 8.3ms Single Half Sine-Wave Superimposed on Rated Load Repetitive Peak Avalanche Power (1μs, 25ºC) Symbol VRRM VRWM VRM IO IFSM PARM Value 45 15 30 180 7000 Unit V A A W N EW PRODUCT Thermal Characteristics Characteristic Typical Thermal Resistance Junction to Case (per leg) Operating and Storage Temperature Range Symbol RθJC TJ, TSTG Value 2 -65 to +150 Unit °C/W ºC Electrical Characteristics @TA = 25°C unless otherwise specified Characteristic Forward Voltage Drop (per leg) Leakage Current (Note 3) Notes: 3. Short duration pulse test used to minimize self-heating effect. Symbol VF IR Min - Typ - Max 0.70 0.66 0.5 80 Unit V mA Test Condition IF = 15A, TJ = 25ºC IF = 15A, TJ = 125ºC VR = 45V, TJ = 25ºC VR = 45V, TJ = 125ºC 10 TA = 125ºC IR, INSTANTANEOUS REVERSE CURRENT (µA) IF, INSTANTANEOUS FORWARD CURRENT (A) 100 100,000 TA = 125ºC 10,000 1 TA = 85ºC 1,000 0.1 T A = 85ºC T A = 25ºC 100 TA = 25ºC 0.01 10 0.001 0.0001 0 0.2 0.4 0.6 0.8 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 1 Typical Forward Characteristics, Per Element 1 0 5 10 15 20 25 30 35 40 45 VR, INSTANTANEOUS REVERSE VOLTAGE (V) Fig. 2 Typical Reverse Characteristics, Per Element SBR is a registered trademark of Diodes Incorporated. SBR3045CTB Document number: DS31665 Rev. 2 - 2 2 of 4 www.diodes.com July 2011 © Diodes Incorporated SBR3045CTB 30 100,000 PARM, MAXIMUM AVALANCHE POWER (W) RθJA = RθJC Total Device IF(AV), AVERAGE FORWARD CURRENT (A) 25 10,000 20 1,000 15 RθJA = RθJC Per Element N EW PRODUCT 100 10 10 5 0 0 150 50 75 100 125 TC, CASE TEMPERATURE (° C) Fig. 3 Forward Current Derating Curve 25 175 1 0.01 0.1 1 10 100 TP, PULSE DURATION (µS) Fig. 4 Maximum Avalanche Power Curve 1,000 Package Outline Dimensions E L1 D1 E1 D H 1 K 2 L2 e b b1 c A a L c1 TO263 Dim Min Max A 4.07 4.82 b 0.51 0.99 b1 1.15 1.77 c 0.356 0.58 c1 1.143 1.65 D 8.39 9.65 D1 6.55 ⎯ E 9.66 10.66 E1 6.23 ⎯ e 2.54 Typ H 14.61 15.87 L 1.78 2.79 L1 1.67 ⎯ L2 1.77 ⎯ a 0° 8° All Dimensions in mm Suggested Pad Layout X2 Y2 Z Y1 Dimensions Z X1 X2 Y1 Y2 E1 Value (in mm) 16.9 1.1 10.8 3.5 7.01 2.5 X1 E1 SBR is a registered trademark of Diodes Incorporated. SBR3045CTB Document number: DS31665 Rev. 2 - 2 3 of 4 www.diodes.com July 2011 © Diodes Incorporated SBR3045CTB IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright © 2011, Diodes Incorporated www.diodes.com N EW PRODUCT SBR is a registered trademark of Diodes Incorporated. SBR3045CTB Document number: DS31665 Rev. 2 - 2 4 of 4 www.diodes.com July 2011 © Diodes Incorporated