UG1001-B

UG1001 - UG1005 1.0A ULTRA-FAST GLASS PASSIVATED RECTIFIER Features · · · · · · · · · · · · · · · · Glass Passivated Die Construction Diffused Junction Ultra-Fast Switching for High Efficiency High Current Capability and Low Forward Voltage Drop Surge Overload Rating to 30A Peak Low Reverse Leakage Current Lead Free Finish, RoHS Compliant (Note 4) A B A Mechanical Data Case: DO-41 Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020C Terminals: Finish - Bright Tin. Plated Leads Solderable per MIL-STD-202, Method 208 Polarity: Cathode Band Marking: Type Number Ordering Information: See Last Page Mounting Position: Any Weight: 0.35 grams (approximate) Dim A B C D DO-41 Min 25.40 4.06 0.71 2.00 C D Max ¾ 5.21 0.864 2.72 All Dimensions in mm Maximum Ratings and Electrical Characteristics Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current (Note 1) @ TA = 55°C Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave superimposed on Rated Load (JEDEC Method) Forward Voltage Peak Reverse Current at Rated DC Blocking Voltage Reverse Recovery Time (Note 3) Typical Junction Capacitance (Note 2) Typical Thermal Resistance Junction to Ambient Operating and Storage Temperature Range Notes: 1. 2. 3. 4. @ TA = 25°C unless otherwise specified Symbol VRRM VRWM VR VR(RMS) IO IFSM VFM IRM trr Cj RqJA Tj, TSTG UG1001 50 35 UG1002 100 70 UG1003 200 140 1.0 30 UG1004 400 280 UG1005 600 420 Unit V V A A @ IF = 1.0A @ TA = 25°C @ TA = 100°C 1.0 5.0 100 50 20 95 -65 to +150 1.3 1.7 V mA 75 10 ns pF K/W °C Valid provided that leads are maintained at ambient temperature at a distance of 9.5mm from the case. Measured at 1.0MHz and applied reverse voltage of 4.0V DC. Measured with IF = 0.5A, IR = 1.0A, Irr = 0.25A. See figure 5. RoHS revision 13.2.2003. Glass and High Temperature Solder Exemptions Applied, see EU Directive Annex Notes 5 and 7. DS27008 Rev. 3 - 2 1 of 3 www.diodes.com UG1001 - UG1005 ã Diodes Incorporated I(AV), AVERAGE FWD RECTIFIED CURRENT (A) 1.0 IF, INSTANTANEOUS FWD CURRENT (A) 10 0.8 UG1001 - UG1003 1.0 UG1004 0.6 0.4 0.1 UG1005 0.2 Single phase half-wave 60 Hz resistive or inductive load 0 25 0.01 50 75 100 125 150 175 200 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 TA, AMBIENT TEMPERATURE (° C) Fig. 1 Forward Current Derating Curve VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics 30 100 IFSM, PEAK FORWARD SURGE CURRENT (A) 20 Cj, CAPACITANCE (pF) UG1001 UG1004 10 10 UG1005 Pulse width = 8.3ms single half sine-wave (JEDEC Method) Tj = 25° C f = 1.0MHz 0 1 10 NUMBER OF CYCLES AT 60Hz Fig. 3 Peak Forward Surge Current 100 1 1 10 VR, REVERSE VOLTAGE (V) Fig. 4 Typical Junction Capacitance trr +0.5A 100 Device Under Test (-) Pulse Generator (Note 2) 0A (+) 50V DC Approx -0.25A (-) Oscilloscope (Note 1) (+) -1.0A Set time base for 50/100 ns/cm Fig. 5 Reverse Recovery Time Characteristic and Test Circuit DS27008 Rev. 3 - 2 2 of 3 www.diodes.com UG1001 - UG1005 Ordering Information Device UG1001-A UG1001-B UG1001-T UG1002-A UG1002-B UG1002-T UG1003-A UG1003-B UG1003-T UG1004-A UG1004-B UG1004-T UG1005-A UG1005-B UG1005-T Notes: 5. (Note 5) Packaging DO-41 DO-41 DO-41 DO-41 DO-41 DO-41 DO-41 DO-41 DO-41 DO-41 DO-41 DO-41 DO-41 DO-41 DO-41 Shipping 5K/Ammo Pack 1K/Bulk 5K/Tape & Reel, 13-inch 5K/Ammo Pack 1K/Bulk 5K/Tape & Reel, 13-inch 5K/Ammo Pack 1K/Bulk 5K/Tape & Reel, 13-inch 5K/Ammo Pack 1K/Bulk 5K/Tape & Reel, 13-inch 5K/Ammo Pack 1K/Bulk 5K/Tape & Reel, 13-inch For packaging details, visit our website at http://www.diodes.com/datasheets/ap02008.pdf DS27008 Rev. 3 - 2 3 of 3 www.diodes.com UG1001 - UG1005