1.5KE8.2

1.5KE6.8 ... 1.5KE440CA 1.5KE6.8 ... 1.5KE440CA Unidirectional and bidirectional Transient Voltage Suppressor Diodes Unidirectionale und bidirectionale Spannungs-Begrenzer-Dioden Version 2006-05-10 Peak pulse power dissipation Maximale Verlustleistung Ø 5.4 ±0.1 1500 W 6.8...440 V Ø 5.4 x 7.5 [mm] 1.0 g Standard breakdown voltage range Standard Abbruch-Spannungsbereich Plastic case Kunststoffgehäuse Weight approx. Gewicht ca. Plastic material has UL classification 94V-0 Gehäusematerial UL94V-0 klassifiziert Standard packaging taped in ammo pack Standard Lieferform gegurtet in Ammo-Pack 62.5 ±0.5 Ø 1.2 Dimensions - Maße [mm] For bidirectional types (suffix “C” or “CA”), electrical characteristics apply in both directions. Für bidirektionale Dioden (Suffix “C” oder “CA”) gelten die elektrischen Werte in beiden Richtungen. Maximum ratings and Characteristics Peak pulse power dissipation (10/1000 µs waveform) Impuls-Verlustleistung (Strom-Impuls 10/1000 µs) Steady state power dissipation Verlustleistung im Dauerbetrieb Peak forward surge current, 60 Hz half sine-wave Stoßstrom für eine 60 Hz Sinus-Halbwelle Max. instantaneous forward voltage Augenblickswert der Durchlass-Spannung Junction temperature – Sperrschichttemperatur Storage temperature – Lagerungstemperatur Thermal resistance junction to ambient air Wärmewiderstand Sperrschicht – umgebende Luft Thermal resistance junction to terminal Wärmewiderstand Sperrschicht – Anschluss IF = 100 A TA = 25°C TA = 75°C TA = 25°C VBR ≤ 200 V VBR > 200 V 7.5 ±0.1 ±0.05 Type Grenz- und Kennwerte PPPM PM(AV) IFSM VF VF Tj TS RthA RthT 1500 W 1) 6.5 W 2) 200 A 3) < 3.5 V 3) < 5 V 3) -50...+175°C -50...+175°C < 19 K/W 2) < 8 K/W 1 2 3 Non-repetitive pulse see curve IPP = f (tr) / PPP = f (tr) Höchstzulässiger Spitzenwert eines einmaligen Impulses, siehe Kurve IPP = f (tr) / PPP = f (tr) Valid, if leads are kept at ambient temperature at a distance of 10 mm from case Gültig, wenn die Anschlussdrähte in 10 mm Abstand von Gehäuse auf Umgebungstemperatur gehalten werden Unidirectional diodes only – Nur für unidirektionale Dioden http://www.diotec.com/ © Diotec Semiconductor AG 1 1.5KE6.8 ... 1.5KE440CA Maximum ratings Type Typ Breakdown voltage at IT = 1 mA Abbruch-Spannung bei IT = 1 mA *) at / bei IT = 10 mA Stand-off voltage Sperrspannung Max. rev. current Max. Sperrstrom at / bei VWM Grenzwerte Max. clamping voltage Max. Begrenzer-Spannung at / bei IPPM (10/1000 µs) VBR [V] 1.5KE6.8 1.5KE6.8A 1.5KE7.5 1.5KE7.5A 1.5KE8.2 1.5KE8.2A 1.5KE9.1 1.5KE9.1A 1.5KE10 1.5KE10A 1.5KE11 1.5KE11A 1.5KE12 1.5KE12A 1.5KE13 1.5KE13A 1.5KE15 1.5KE15A 1.5KE16 1.5KE16A 1.5KE18 1.5KE18A 1.5KE20 1.5KE20A 1.5KE22 1.5KE22A 1.5KE24 1.5KE24A 1.5KE27 1.5KE27A 1.5KE30 1.5KE30A 1.5KE33 1.5KE33A 1.5KE36 1.5KE36A 1.5KE39 1.5KE39A 1.5KE43 1.5KE43A 1.5KE47 1.5KE47A 1.5KE51 1.5KE51A 6.8 ± 10% 6.8 ± 5% 7.5 ± 10% 7.5 ± 5% 8.2 ± 10% 8.2 ± 5% 9.1 ± 10% 9.1 ± 5% 10 ± 10% 10 ± 5% 11 ± 10% 11 ± 5% 12 ± 10% 12 ± 5% 13 ± 10% 13 ± 5% 15 ± 10% 15 ± 5% 16 ± 10% 16 ± 5% 18 ± 10% 18 ± 5% 20 ± 10% 20 ± 5% 22 ± 10% 22 ± 5% 24 ± 10% 24 ± 5% 27 ± 10% 27 ± 5% 30 ± 10% 30 ± 5% 33 ± 10% 33 ± 5% 36 ± 10% 36 ± 5% 39 ± 10% 39 ± 5% 43 ± 10% 43 ± 5% 47 ± 10% 47 ± 5% 51 ± 10% 51 ± 5% 6.12...7.48 *) 6.45...7.14 *) 6.75...8.25 *) 7.13...7.88 *) 7.38...9.02 *) 7.79...8.61 *) 8.19...10.0 8.65...9.55 9.0...11.0 9.5...10.5 9.9...12.1 10.5...11.6 10.8...13.2 11.4...12.6 11.7...14.3 12.4...13.7 13.5...16.5 14.3...15.8 14.4...17.6 15.2...16.8 16.2...19.8 17.1...18.9 18.0...22.0 19.0...21.0 19.8...24.2 20.9...23.1 21.6...26.4 22.8...25.2 24.3...29.7 25.7...28.4 27.0...30.0 28.5...31.5 29.7...36.3 31.4...34.7 32.4...39.6 34.2...37.8 35.1...42.9 37.1...41.0 38.7...47.3 40.9...45.2 42.3...51.7 44.7...49.4 45.9...56.1 48.5...53.6 VWM [V] 5.5 5.8 6.0 6.4 6.6 7.0 7.3 7.7 8.1 8.5 8.9 9.4 9.7 10.2 10.5 11.1 12.1 12.8 12.9 13.6 14.5 15.3 16.2 17.1 17.8 18.8 19.4 20.5 21.8 23.1 24.3 25.6 26.8 28.2 29.1 30.8 31.6 33.3 34.8 36.8 38.1 40.2 41.3 43.6 ID [µA] 1000 1000 500 500 200 200 50 50 10 10 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 VC [V] 10.8 10.5 11.7 11.3 12.5 12.1 13.8 13.4 15.0 14.5 16.2 15.6 17.3 16.7 19.0 18.2 22.0 21.2 23.5 22.5 26.5 25.2 29.1 27.7 31.9 30.6 34.7 33.2 39.1 37.5 43.5 41.4 47.7 45.7 52.0 49.9 56.4 53.9 61.9 59.3 67.8 64.8 73.5 70.1 IPPM [A] 145 150 134 139 126 130 114 117 105 108 97 100 91 94 82 86 71 74 67 70 59 60 54 56 49 51 45 47 40 42 36 38 33 34 30 31 27 29 25 26 23 24 21 22 2 http://www.diotec.com/ © Diotec Semiconductor AG 1.5KE6.8 ... 1.5KE440CA Maximum ratings Type Typ Breakdown voltage at IT = 1 mA Abbruch-Spannung bei IT = 1 mA *) at / bei IT = 10 mA Stand-off voltage Sperrspannung Max. rev. current Max. Sperrstrom at / bei VWM Grenzwerte Max. clamping voltage Max. Begrenzer-Spannung at / bei IPPM (10/1000 µs) VBR [V] 1.5KE56 1.5KE56A 1.5KE62 1.5KE62A 1.5KE68 1.5KE68A 1.5KE75 1.5KE75A 1.5KE82 1.5KE82A 1.5KE91 1.5KE91A 1.5KE100 1.5KE100A 1.5KE110 1.5KE110A 1.5KE120 1.5KE120A 1.5KE130 1.5KE130A 1.5KE150 1.5KE150A 1.5KE160 1.5KE160A 1.5KE170 1.5KE170A 1.5KE180 1.5KE180A 1.5KE200 1.5KE200A 1.5KE220 1.5KE220A 1.5KE250 1.5KE250A 1.5KE300 1.5KE300A 1.5KE350 1.5KE350A 1.5KE400 1.5KE400A 1.5KE440 1.5KE440A 56 ± 10% 56 ± 5% 62 ± 10% 62 ± 5% 68 ± 10% 68 ± 5% 75 ± 10% 75 ± 5% 82 ± 10% 82 ± 5% 91 ± 10% 91 ± 5% 100 ± 10% 100 ± 5% 110 ± 10% 110 ± 5% 120 ± 10% 120 ± 5% 130 ± 10% 130 ± 5% 150 ± 10% 150 ± 5% 160 ± 10% 160 ± 5% 170 ± 10% 170 ± 5% 180 ± 10% 180 ± 5% 200 ± 10% 200 ± 5% 220 ± 10% 220 ± 5% 250 ± 10% 250 ± 5% 300 ± 10% 300 ± 5% 335 ± 10%0 350 ± 5% 400 ± 10% 400 ± 5% 440 ± 10% 440 ± 5% 50.4...61.6 53.2...58.8 55.8...68.8 58.9...65.1 61.2...74.8 64.6...71.4 67.5...82.5 71.3...78.8 73.8...90.2 77.9...86.1 81.9...100 86.5...95.5 90.0...110 95.0...105 99.0...121 105...116 108...132 114...126 117...143 124...137 135...165 143...158 144...176 152...168 153...187 162...179 162...198 171...189 180...220 190...210 198...242 209...231 225...275 237...263 270...330 285...315 315...385 332...368 360...440 380...420 396...484 418...462 VWM [V] 45.4 47.8 50.2 53.0 55.1 58.1 60.7 64.1 66.4 70.1 73.7 77.8 81.0 85.5 89.2 94.0 97.2 102 105 111 121 128 130 136 138 145 146 154 162 171 175 185 202 214 243 256 284 300 324 342 356 376 ID [µA] 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 VC [V] 81 77 89 85 98 92 108 103 118 113 131 125 144 137 158 152 173 165 187 179 215 207 230 219 244 234 258 246 287 274 344 328 360 344 430 414 504 482 574 548 631 602 IPPM [A] 19 20 17 18 16.0 17.0 14.0 15.0 13.0 13.9 12.0 12.6 10.9 11.4 9.9 10.3 9.1 9.5 8.4 8.7 7.3 7.6 6.8 7.1 6.4 6.7 6.1 6.4 5.4 5.7 4.5 4.8 4.3 4.5 3.6 3.8 3.1 3.2 2.7 2.8 2.4 2.6 © Diotec Semiconductor AG http://www.diotec.com/ 3 1.5KE6.8 ... 1.5KE440CA 120 [%] 100 100 [%] 80 80 tr = 10 µs 60 60 PPPM/2 IPPM/2 40 IPP 20 PPP 0 1 40 IPP 20 PPP 0 TA 50 100 150 [°C] 1 0 tP 0 1 2 3 [ms] 4 10/1000µs - pulse waveform 10/1000µs - Impulsform Peak pulse power/current vs. ambient temperature ) Impuls-Spitzenleistung/Strom vs. Umgebungstemp.1) 10 2 [kW] 10 1 PPP 0.1 0.1µs tP 1µs 10µs 100µs 1ms 10ms Non repetitive peak pulse power versus pulse width (10/1000 wave form) Einzel-Impuls-Spitzenleistung in Abh. von der Pulsdauer (10/1000-Impuls) The range of type numbers is graded to the international E 24 standard. The standard tolerance of the breakdown voltage for each type is ± 10%. Suffix “A” denotes a tolerance of ± 5% for the breakdown voltage. e.g.: 1.5KE51C = bidirectional diode, VBR = 51 V (± 10%), VWM ≥ 41.3 V at ID = 5 μA 1.5KE9.1A = unidirectional diode, VBR = 9.1 V (± 5%), VWM ≥ 7.7 V at ID = 50 μA Die Abstufung der Typen innerhalb der Reihe entspricht dem internationalen E 24-Standard. Die Toleranz der Abbruchspannung jedes einzelnen Typs beträgt in der Standardausführung ± 10%. Suffix “A” kennzeichnet eine Toleranz der Abbruchspannung von ± 5%. 1 Valid, if leads are kept at ambient temperature at a distance of 10 mm from case Gültig, wenn die Anschlussdrähte in 10 mm Abstand von Gehäuse auf Umgebungstemperatur gehalten werden http://www.diotec.com/ © Diotec Semiconductor AG 4