P4KE62

P4KE6.8 ... P4KE440CA P4KE6.8 ... P4KE440CA Unidirectional and bidirectional Transient Voltage Suppressor Diodes Unidirektionale und bidirektionale Spannungs-Begrenzer-Dioden Version 2006-05-10 Peak pulse power dissipation Maximale Verlustleistung Ø 3±0.05 400 W 6.8...440 V DO-15 (DO-204AC) 0.4 g Nominal breakdown voltage Nominale Abbruch-Spannung Plastic case Kunststoffgehäuse Weight approx. Gewicht ca. 62.5±0.5 Type 6.3±0.1 Ø 0.8 ±0.05 Plastic material has UL classification 94V-0 Gehäusematerial UL94V-0 klassifiziert Standard packaging taped in ammo pack Standard Lieferform gegurtet in ammo-Pack Dimensions - Maße [mm] For bidirectional types (add suffix “C” or “CA”), electrical characteristics apply in both directions. Für bidirektionale Dioden (ergänze Suffix “C” oder “CA”) gelten die elektrischen Werte in beiden Richtungen. Maximum ratings and Characteristics Peak pulse power dissipation (10/1000 µs waveform) Impuls-Verlustleistung (Strom-Impuls 10/1000 µs) Steady state power dissipation Verlustleistung im Dauerbetrieb Peak forward surge current, 60 Hz half sine-wave Stoßstrom für eine 60 Hz Sinus-Halbwelle Max. instantaneous forward voltage Augenblickswert der Durchlass-Spannung Junction temperature – Sperrschichttemperatur Storage temperature – Lagerungstemperatur Thermal resistance junction to ambient air Wärmewiderstand Sperrschicht – umgebende Luft Thermal resistance junction to leadsl Wärmewiderstand Sperrschicht – Anschlussdraht IF = 25 A TA = 25°C TA = 75°C TA = 25°C VBR ≤ 200 V VBR > 200 V Grenz- und Kennwerte PPPM PM(AV) IFSM VF VF Tj TS RthA RthL 400 W 1) 1 W 2) 40 A 3) < 3.0 V 3) < 6.5 V 3) -50...+175°C -50...+175°C < 45 K/W 2) < 15 K/W 1 2 3 Non-repetitive pulse see curve IPP = f (t) / PPP = f (r) Höchstzulässiger Spitzenwert eines einmaligen Impulses, siehe Kurve IPP = f (t) / PPP = f (t) Valid, if leads are kept at ambient temperature at a distance of 10 mm from case Gültig, wenn die Anschlussdrähte in 10 mm Abstand von Gehäuse auf Umgebungstemperatur gehalten werden Unidirectional diodes only – Nur für unidirektionale Dioden http://www.diotec.com/ © Diotec Semiconductor AG 1 P4KE6.8 ... P4KE440CA Maximum ratings Type Typ Breakdown voltage at IT = 1 mA Abbruch-Spannung bei IT = 1 mA *) at / bei IT = 10 mA Stand-off voltage Sperrspannung Max. rev. current Max. Sperrstrom at / bei VWM Grenzwerte Max. clamping voltage Max. Begrenzer-Spannung at / bei IPPM (10/1000 µs) VBR [V] P4KE6.8 P4KE6.8A P4KE7.5 P4KE7.5A P4KE8.2 P4KE8.2A P4KE9.1 P4KE9.1A P4KE10 P4KE10A P4KE11 P4KE11A P4KE12 P4KE12A P4KE13 P4KE13A P4KE15 P4KE15A P4KE16 P4KE16A P4KE18 P4KE18A P4KE20 P4KE20A P4KE22 P4KE22A P4KE24 P4KE24A P4KE27 P4KE27A P4KE30 P4KE30A P4KE33 P4KE33A P4KE36 P4KE36A P4KE39 P4KE39A P4KE43 P4KE43A P4KE47 P4KE47A P4KE51 P4KE51A 6.8 ± 10% 6.8 ± 5% 7.5 ± 10% 7.5 ± 5% 8.2 ± 10% 8.2 ± 5% 9.1 ± 10% 9.1 ± 5% 10 ± 10% 10 ± 5% 11 ± 10% 11 ± 5% 12 ± 10% 12 ± 5% 13 ± 10% 13 ± 5% 15 ± 10% 15 ± 5% 16 ± 10% 16 ± 5% 18 ± 10% 18 ± 5% 20 ± 10% 20 ± 5% 22 ± 10% 22 ± 5% 24 ± 10% 24 ± 5% 27 ± 10% 27 ± 5% 30 ± 10% 30 ± 5% 33 ± 10% 33 ± 5% 36 ± 10% 36 ± 5% 39 ± 10% 39 ± 5% 43 ± 10% 43 ± 5% 47 ± 10% 47 ± 5% 51 ± 10% 51 ± 5% 6.12...7.48 *) 6.45...7.14 *) 6.75...8.25 *) 7.13...7.88 *) 7.38...9.02 *) 7.79...8.61 *) 8.19...10.0 8.65...9.55 9.0...11.0 9.5...10.5 9.9...12.1 10.5...11.6 10.8...13.2 11.4...12.6 11.7...14.3 12.4...13.7 13.5...16.5 14.3...15.8 14.4...17.6 15.2...16.8 16.2...19.8 17.1...18.9 18.0...22.0 19.0...21.0 19.8...24.2 20.9...23.1 21.6...26.4 22.8...25.2 24.3...29.7 25.7...28.4 27.0...30.0 28.5...31.5 29.7...36.3 31.4...34.7 32.4...39.6 34.2...37.8 35.1...42.9 37.1...41.0 38.7...47.3 40.9...45.2 42.3...51.7 44.7...49.4 45.9...56.1 48.5...53.6 VWM [V] 5.5 5.8 6.0 6.4 6.6 7.0 7.3 7.7 8.1 8.5 8.9 9.4 9.7 10.2 10.5 11.1 12.1 12.8 12.9 13.6 14.5 15.3 16.2 17.1 17.8 18.8 19.4 20.5 21.8 23.1 24.3 25.6 26.8 28.2 29.1 30.8 31.6 33.3 34.8 36.8 38.1 40.2 41.3 43.6 ID [µA] 1000 1000 500 500 200 200 50 50 10 10 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 VC [V] 10.8 10.5 11.7 11.3 12.5 12.1 13.8 13.4 15.0 14.5 16.2 15.6 17.3 16.7 19.0 18.2 22.0 21.2 23.5 22.5 26.5 25.2 29.1 27.7 31.9 30.6 34.7 33.2 39.1 37.5 43.5 41.4 47.7 45.7 52.0 49.9 56.4 53.9 61.9 59.3 67.8 64.8 73.5 70.1 IPPM [A] 38.0 40.0 35.0 37.0 33.0 34.0 30.0 31.0 28.0 29.0 26.0 27.0 24.0 25.0 22.0 23.0 19.0 21.0 17.8 18.6 16.0 16.5 14.0 15.0 13.0 13.7 12.0 12.6 10.7 11.0 9.6 10.0 8.8 9.0 8.0 8.4 7.4 7.7 6.7 7.0 6.2 6.4 5.7 6.0 2 http://www.diotec.com/ © Diotec Semiconductor AG P4KE6.8 ... P4KE440CA Maximum ratings Type Typ Breakdown voltage at IT = 1 mA Abbruch-Spannung bei IT = 1 mA *) at / bei IT = 10 mA Stand-off voltage Sperrspannung Max. rev. current Max. Sperrstrom at / bei VWM Grenzwerte Max. clamping voltage Max. Begrenzer-Spannung at / bei IPPM (10/1000 µs) VBR [V] P4KE56 P4KE56A P4KE62 P4KE62A P4KE68 P4KE68A P4KE75 P4KE75A P4KE82 P4KE82A P4KE91 P4KE91A P4KE100 P4KE100A P4KE110 P4KE110A P4KE120 P4KE120A P4KE130 P4KE130A P4KE150 P4KE150A P4KE160 P4KE160A P4KE170 P4KE170A P4KE180 P4KE180A P4KE200 P4KE200A P4KE220 P4KE220A P4KE250 P4KE250A P4KE300 P4KE300A P4KE350 P4KE350A P4KE400 P4KE400A P4KE440 P4KE440A 56 ± 10% 56 ± 5% 62 ± 10% 62 ± 5% 68 ± 10% 68 ± 5% 75 ± 10% 75 ± 5% 82 ± 10% 82 ± 5% 91 ± 10% 91 ± 5% 100 ± 10% 100 ± 5% 110 ± 10% 110 ± 5% 120 ± 10% 120 ± 5% 130 ± 10% 130 ± 5% 150 ± 10% 150 ± 5% 160 ± 10% 160 ± 5% 170 ± 10% 170 ± 5% 180 ± 10% 180 ± 5% 200 ± 10% 200 ± 5% 220 ± 10% 220 ± 5% 250 ± 10% 250 ± 5% 300 ± 10% 300 ± 5% 350 ± 10%0 350 ± 5% 400 ± 10% 400 ± 5% 440 ± 10% 440 ± 5% 50.4...61.6 53.2...58.8 55.8...68.8 58.9...65.1 61.2...74.8 64.6...71.4 67.5...82.5 71.3...78.8 73.8...90.2 77.9...86.1 81.9...100 86.5...95.5 90.0...110 95.0...105 99.0...121 105...116 108...132 114...126 117...143 124...137 135...165 143...158 144...176 152...168 153...187 162...179 162...198 171...189 180...220 190...210 198...242 209...231 225...275 237...263 270...330 285...315 315...385 332...368 360...440 380...420 396...484 418...462 VWM [V] 45.4 47.8 50.2 53.0 55.1 58.1 60.7 64.1 66.4 70.1 73.7 77.8 81.0 85.5 89.2 94.0 97.2 102 105 111 121 128 130 136 138 145 146 154 162 171 175 185 202 214 243 256 284 300 324 342 356 376 ID [µA] 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 VC [V] 81 77 89 85 98 92 108 103 118 113 131 125 144 137 158 152 173 165 187 179 215 207 230 219 244 234 258 246 287 274 344 328 360 344 430 414 504 482 574 548 631 602 IPPM [A] 5.2 5.4 4.7 5.0 4.2 4.5 3.8 4.0 3.5 3.7 3.2 3.3 2.9 3.0 2.6 2.7 2.4 2.5 2.2 2.3 1.9 2.0 1.8 1.9 1.7 1.8 1.6 1.7 1.4 1.5 1.2 1.3 1.1 1.2 0.97 1.0 0.83 0.87 0.73 0.76 0.66 0.69 © Diotec Semiconductor AG http://www.diotec.com/ 3 P4KE6.8 ... P4KE440CA 120 [%] 100 100 [%] 80 80 tr = 10 µs 60 60 PPPM/2 IPPM/2 40 IPP 20 PPP 0 0 TA 50 100 150 [°C] 1 40 IPP 20 PPP 0 0 tP 1 2 3 [ms] 4 10/1000µs - pulse waveform 10/1000µs - Impulsform Peak pulse power/current vs. ambient temperature ) Impuls-Spitzenleistung/Strom vs. Umgebungstemp.1) 1 10 2 [kW] 10 1 PPP 0.1 0.1µs tP 1µs 10µs 100µs 1ms 10ms Non repetitive peak pulse power versus pulse width (10/1000 wave form) Einzel-Impuls-Spitzenleistung in Abh. von der Pulsdauer (10/1000-Impuls) The range of type numbers is graded to the international E 24 standard. The standard tolerance of the breakdown voltage for each type is ± 10%. Suffix “A” denotes a tolerance of ± 5% for the breakdown voltage. e.g.: P4KE51C = bidirectional diode, VBR = 51 V (± 10%), VWM ≥ 41.3 V at ID = 5 μA P4KE9.1A = unidirectional diode, VBR = 9.1 V (± 5%), VWM ≥ 7.7 V at ID = 50 μA Die Abstufung der Typen innerhalb der Reihe entspricht dem internationalen E 24-Standard. Die Toleranz der Abbruchspannung jedes einzelnen Typs beträgt in der Standardausführung ± 10%. Suffix “A” kennzeichnet eine Toleranz der Abbruchspannung von ± 5%. 1 Valid, if leads are kept at ambient temperature at a distance of 10 mm from case Gültig, wenn die Anschlussdrähte in 10 mm Abstand von Gehäuse auf Umgebungstemperatur gehalten werden http://www.diotec.com/ © Diotec Semiconductor AG 4