P6KE440

P6 KE 6.8 ... P6 KE 440CA, P6 KE 520C Unidirectional and bidirectional Transient Voltage Suppressor Diodes Unidirektionale und bidirektionale Spannungs-Begrenzer-Dioden Peak pulse power dissipation Impuls-Verlustleistung Nominal breakdown voltage Nominale Abbruch-Spannung Plastic case – Kunststoffgehäuse Weight approx. – Gewicht ca. Plastic material has UL classification 94V-0 Gehäusematerial UL94V-0 klassifiziert Dimensions / Maße in mm 600 W 6.8...520 V DO-15 (DO-204AC) 0.4 g Standard packaging taped in ammo pack Standard Lieferform gegurtet in Ammo-Pack see page 16 siehe Seite 16 For bidirectional types (suffix “C” or “CA”), electrical characteristics apply in both directions. Für bidirektionale Dioden (Suffix “C” oder “CA”) gelten die el. Werte in beiden Richtungen. Maximum ratings and Characteristics Peak pulse power dissipation (10/1000 :s waveform) Impuls-Verlustleistung (Strom-Impuls 10/1000 :s) Steady state power dissipation Verlustleistung im Dauerbetrieb Peak forward surge current, 60 Hz half sine-wave Stoßstrom für eine 60 Hz Sinus-Halbwelle Operating junction temperature – Sperrschichttemperatur Storage temperature – Lagerungstemperatur Max. instantaneous forward voltage Augenblickswert der Durchlaßspannung IF = 50 A VBR # 200 V VBR > 200 V TA = 25/C TA = 25/C TA = 25/C Kenn- und Grenzwerte PPPM PM(AV) IFSM Tj TS VF VF RthA RthL 600 W 1) 5 W 2) 100 A 3) – 50…+175/C – 50…+175/C < 3.5 V 3) < 5.0 V 3) < 30 K/W 2) < 15 K/W Thermal resistance junction to ambient air Wärmewiderstand Sperrschicht – umgebende Luft Thermal resistance junction to lead Wärmewiderstand Sperrschicht – Anschlußdraht 1 ) Non-repetitive current pulse see curve IPPM = f (tr) Höchstzulässiger Spitzenwert eines einmaligen Strom-Impulses, siehe Kurve IPPM = f (tr) 2 ) Valid, if leads are kept at ambient temperature at a distance of 10 mm from case Gültig, wenn die Anschlußdrähte in 10 mm Abstand von Gehäuse auf Umgebungstemperatur gehalten werden 3 ) Unidirectional diodes only – Nur für unidirektionale Dioden 25.03.2003 1 P6 KE 6.8 ... P6 KE 440CA, P6 KE 520C Maximum ratings Type Typ Breakdown voltage at IT = 1 mA Abbruch-Spanng. bei IT = 1 mA *) at / bei IT = 10 mA VBR [V] P6 KE6.8 P6 KE6.8A P6 KE7.5 P6 KE7.5A P6 KE8.2 P6 KE8.2A P6 KE9.1 P6 KE9.1A P6 KE10 P6 KE10A P6 KE11 P6 KE11A P6 KE12 P6 KE12A P6 KE13 P6 KE13A P6 KE15 P6 KE15A P6 KE16 P6 KE16A P6 KE18 P6 KE18A P6 KE20 P6 KE20A P6 KE22 P6 KE22A P6 KE24 P6 KE24A P6 KE27 P6 KE27A P6 KE30 P6 KE30A P6 KE33 P6 KE33A P6 KE36 P6 KE36A P6 KE39 P6 KE39A P6 KE43 P6 KE43A P6 KE47 P6 KE47A P6 KE51 P6 KE51A 6.8 ± 10% 6.8 ± 5% 7.5 ± 10% 7.5 ± 5% 8.2 ± 10% 8.2 ± 5% 9.1 ± 10% 9.1 ± 5% 10 ± 10% 10 ± 5% 11 ± 10% 11 ± 5% 12 ± 10% 12 ± 5% 13 ± 10% 13 ± 5% 15 ± 10% 15 ± 5% 16 ± 10% 16 ± 5% 18 ± 10% 18 ± 5% 20 ± 10% 20 ± 5% 22 ± 10% 22 ± 5% 24 ± 10% 24 ± 5% 27 ± 10% 27 ± 5% 30 ± 10% 30 ± 5% 33 ± 10% 33 ± 5% 36 ± 10% 36 ± 5% 39 ± 10% 39 ± 5% 43 ± 10% 43 ± 5% 47 ± 10% 47 ± 5% 51 ± 10% 51 ± 5% 6.12...7.48 *) 6.45...7.14 *) 6.75...8.25 *) 7.13...7.88 *) 7.38...9.02 *) 7.79...8.61 *) 8.19...10.0 8.65...9.55 9.0...11.0 9.5...10.5 9.9...12.1 10.5...11.6 10.8...13.2 11.4...12.6 11.7...14.3 12.4...13.7 13.5...16.5 14.3...15.8 14.4...17.6 15.2...16.8 16.2...19.8 17.1...18.9 18.0...22.0 19.0...21.0 19.8...24.2 20.9...23.1 21.6...26.4 22.8...25.2 24.3...29.7 25.7...28.4 27.0...33.0 28.5...31.5 29.7...36.3 31.4...34.7 32.4...39.6 34.2...37.8 35.1...42.9 37.1...41.0 38.7...47.3 40.9...45.2 42.3...51.7 44.7...49.4 45.9...56.1 48.5...53.6 Stand-off voltage Sperrspg. VWM [V] 5.5 5.8 6.0 6.4 6.6 7.0 7.3 7.7 8.1 8.5 8.9 9.4 9.7 10.2 10.5 11.1 12.1 12.8 12.9 13.6 14.5 15.3 16.2 17.1 17.8 18.8 19.4 20.5 21.8 23.1 24.3 25.6 26.8 28.2 29.1 30.8 31.6 33.3 34.8 36.8 38.1 40.2 41.3 43.6 Max. rev. current Max. Sperrstrom at / bei VWM ID [:A] 1000 1000 500 500 200 200 50 50 10 10 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 Grenzwerte Max. clamping voltage Max. Begrenzerspanng. at / bei IPPM (10/1000:s) VC [V] 10.8 10.5 11.7 11.3 12.5 12.1 13.8 13.4 15.0 14.5 16.2 15.6 17.3 16.7 19.0 18.2 22.0 21.2 23.5 22.5 26.5 25.5 29.1 27.7 31.9 30.6 34.7 33.2 39.1 37.5 43.5 41.4 47.7 45.7 52.0 49.9 56.4 53.9 61.9 59.3 67.8 64.8 73.5 70.1 IPPM [A] 58.0 60.0 53.0 55.0 50.0 52.0 45.0 47.0 42.0 43.0 38.0 40.0 36.0 37.0 33.0 34.0 28.0 29.0 26.0 28.0 23.0 25.0 21.0 22.0 19.0 20.0 18.0 19.0 16.0 16.8 14.0 15.0 13.0 13.8 12.0 12.6 11.1 11.6 10.0 10.6 9.2 9.7 8.5 8.9 2 P6 KE 6.8 ... P6 KE 440CA, P6 KE 520C Maximum ratings Type Typ Breakdown voltage at IT = 1 mA Abbruch-Spanng. bei IT = 1 mA *) at / bei IT = 10 mA VBR [V] P6KE56 P6 KE56A P6 KE62 P6 KE62A P6 KE68 P6 KE68A P6 KE75 P6 KE75A P6 KE82 P6 KE82A P6 KE91 P6 KE91A P6 KE100 P6 KE100A P6 KE110 P6 KE110A P6 KE120 P6 KE120A P6 KE130 P6 KE130A P6 KE150 P6 KE150A P6 KE160 P6 KE160A P6 KE170 P6 KE170A P6 KE180 P6 KE180A P6 KE200 P6 KE200A P6 KE220 P6 KE220A P6 KE250 P6 KE250A P6 KE300 P6 KE300A P6 KE350 P6 KE350A P6 KE400 P6 KE400A P6 KE440 P6 KE440A P6 KE520C 1) 1 Grenzwerte Stand-off voltage Sperrspg. VWM [V] 45.4 47.8 50.2 53.0 55.1 58.1 60.7 64.1 66.4 70.1 73.7 77.8 81.0 85.5 89.2 94.0 97.2 102 105 111 121 128 130 136 138 145 146 154 162 171 175 185 202 214 243 256 284 300 324 342 356 376 423 Max. rev. current Max. Sperrstrom at / bei VWM ID [:A] 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 Max. clamping voltage Max. Begrenzerspanng. at / bei IPPM (10/1000:s) VC [V] 80.5 77.0 89.0 85.0 98.0 92.0 108 103 118 113 131 125 144 137 158 152 173 165 187 179 215 207 230 219 244 234 258 246 287 274 344 328 360 344 430 414 504 482 574 548 631 602 745 IPPM [A] 7.8 8.1 7.0 7.4 6.4 6.8 5.8 6.1 5.3 5.5 4.8 5.0 4.3 4.5 3.9 4.1 3.6 3.8 3.3 3.5 2.9 3.0 2.7 2.8 2.5 2.6 2.4 2.5 2.1 2.2 1.8 1.9 1.7 1.8 1.4 1.5 1.2 1.3 1.0 1.1 0.99 1.04 0.81 56 ± 10% 56 ± 5% 62 ± 10% 62 ± 5% 68 ± 10% 68 ± 5% 75 ± 10% 75 ± 5% 82 ± 10% 82 ± 5% 91 ± 10% 91 ± 5% 100 ± 10% 100 ± 5% 110 ± 10% 110 ± 5% 120 ± 10% 120 ± 5% 130 ± 10% 130 ± 5% 150 ± 10% 150 ± 5% 160 ± 10% 160 ± 5% 170 ± 10% 170 ± 5% 180 ± 10% 180 ± 5% 200 ± 10% 200 ± 5% 220 ± 10% 220 ± 5% 250 ± 10% 250 ± 5% 300 ± 10% 300 ± 5% 350 ± 10% 350 ± 5% 400 ± 10% 400 ± 5% 440 ± 10% 440 ± 5% 520 ± 10% 50.4...61.6 53.2...58.8 55.8...68.8 58.9...65.1 61.2...74.8 64.6...71.4 67.5...82.5 71.3...78.8 73.8...90.2 77.9...86.1 81.9...100 86.5...95.5 90.0...110 95.0...105 99.0...121 105...116 108...132 114...126 117...143 124...137 135...165 143...158 144...176 152...168 153...187 162...179 162...198 171...189 180...220 190...210 198...242 209...231 225...275 237...263 270...330 285...315 315...385 332...368 360...440 380...420 396...484 418...462 470...570 ) Available only bidirectional version - nur bidirectionale Ausführung lieferbar 25.03.2003 3 P6 KE 6.8 ... P6 KE 440CA, P6 KE 520C 1 The order of type numbers is graded to the international E 24 standard. The standard tolerance of the breakdown voltage for each type is ± 10%. Suffix “A” denotes a tolerance of ± 5%. e.g.: P6KE160CA = bidirectional diode, VBR = 160 V (± 5%), VWM $ 136 V at ID = 5 :A P6KE7.5A = unidirectional diode, VBR = 7.5 V (± 5%), VWM $ 6.4 V at ID = 500 :A Die Abstufung der Typen innerhalb der Reihe entspricht dem internationalen E 24-Standard. Die Toleranz der Arbeitsspannung jedes einzelnen Typs beträgt in der Standardausführung ± 10%. Suffix “A” kennzeichnet eine Toleranz von ± 5%. z.B.: P6KE160CA = bidirectionale Diode, VBR = 160 V (± 5%), VWM $ 136 V at ID = 5 :A P6KE7.5A = unidirectionale Diode, VBR = 7.5 V (± 5%), VWM $ 6.4 V at ID = 500 :A 1 ) Valid, if leads are kept at ambient temperature at a distance of 10 mm from case Gültig, wenn die Anschlußdrähte in 10 mm Abstand von Gehäuse auf Umgebungstemperatur gehalten werden 4 F:\Data\WP\DatBlatt\Einzelblätter\p6ke6.8.wpd